Vacuum Membrane Press Machine for PVC Film Cabinet Door Increase efficiency by 50% Negative Pressure
Presses PVC and PET film onto routed MDF door fronts in one heated vacuum cycle. Built to order.
View Machine Data →
Process Solution
Membrane Press Door Front Production
The PVC and PET film route for routed MDF fronts, from CNC to a pressed door that does not lift at the groove.
Stage By Stage
Every Step And The Problem It Exists To Solve
Rout
Problem: The groove profile decides whether the film will bridge or follow
Profile depth is checked against the 80 mm maximum processing height and the film grade
Sand and dedust
Problem: Chips under the film show as bumps in the finished face
Brush sanding plus dust cleaning before the panel reaches the press
Glue
Problem: Uneven adhesive is why fronts lift months later
Roller coating applies the adhesive at a controlled and repeatable weight
Press
Problem: Hand lamination cannot pull film into a deep groove
Negative pressure to -0.1 MPa with double upper and lower heating, 2-4 minutes per cycle
Trim and inspect
Problem: Groove corners are where a bad press shows first
Trim the overhang and check corners under raking light before packing
Machines In This Solution
What Gets Quoted
Vacuum Membrane Press for MDF Kitchen Cabinet Doors Save 60% of labor force
Presses PVC and PET film onto routed MDF door fronts in one heated vacuum cycle. Built to order.
View Machine Data →
Woodworking Cabinet Door Automatic Brush Polishing Sanding Machine Provided Furniture Factory
Disc brush sander that reaches into raised panel profiles and routed grooves. Built to order.
View Machine Data →
Woodworking Cabinet Door Automatic Curved Surface Sanding Machine for door
Disc brush sander that reaches into raised panel profiles and routed grooves. Built to order.
View Machine Data →
Prime Single Roller Coating Machine Roller Coater machine
Single head roller coater for primer or top coat at 5.75 kW connected load. Built to order.
View Machine Data →
Prime UV One Head roller coater machine Roller Coating Machine
Single head roller coater for primer or top coat at 5.75 kW connected load. Built to order.
View Machine Data →
dust clean machine surface dust cleaning machine for MDF solid wood
Brush and blow unit that takes sanding dust off the panel before coating. Built to order.
View Machine Data →
Questions About This Solution
What film thickness can the press handle?
PVC film from 0.10 mm to 0.60 mm. The plated setting normally runs at 0.1-0.45 mm.
How long is one press cycle?
2 to 4 minutes per piece depending on film grade, panel thickness and plate temperature.
Can it sand a raised panel door?
Yes, that is what the brush discs are for. They flex into the profile instead of riding over it.
What is the working width?
1300 mm.
Can the machine be customised?
Yes. Machines are customised to the buyer's requirement, which is how almost every order is built.
What technical support do you offer?
Technical support by phone, email or WhatsApp and Skype around the clock, an English version manual with operation video, and an engineer available to service machinery overseas.
Get This Line Drawn For Your Building
Working area, power supply and line speed are checked against what you actually have before any machine is quoted.