woodworking panel Automatic Inert Coating Line high glossy skin feeling surface
Inert technology line that gives decorative panels a high gloss or skin feel surface. Built to order.
View Machine Data →
Inert Coating Line
Automatic Inert Coating Line high glossy skin feeling surface
Inert technology line that gives decorative panels a high gloss or skin feel surface. Configured for high gloss and skin feeling surfaces on decorative panel.
Product Overview
Automatic Inert Coating Line For High Gloss And Skin Feel Surfaces
Configured for high gloss and skin feeling surfaces on decorative panel.
An automatic inert coating line for decorative panels. Inert technology produces high gloss, matt and skin feeling surfaces directly on the panel, and the film costs much less than PET. After inert processing the panel sells as a high end material, which is where the added value comes from. Three operators run the line at 12-20 m per minute inside a 6 x 18 m area on a minimum 70 kW supply.
High gloss configurationMatt and skin feeling configuration
Key Benefits
What This Machine Changes On Your Floor
1
Panels become a high end material and carry more added value
2
Three operators at 12-20 m per minute
3
6 x 18 m working area on a 70 kW minimum supply
4
High gloss, matt and skin feeling surfaces from one line
5
The film is much cheaper than PET
Who It Is For
Plants That Buy This Machine
- Decorative panel producers adding a premium surface range
- Cabinet plants competing against PET faced fronts
- Board converters looking for higher value per sheet
Problems It Solves
What It Removes From Your Process
- PET film is expensive and the margin on a high gloss panel is thin
- Skin feel and super matt surfaces have to be bought in from a laminator
- Panels compete on price because there is no premium surface in the range
Application Scenarios
Typical Jobs It Runs
High gloss cabinet fronts without PET film
Super matt skin feel wardrobe panels
Decorative wall panel with a premium surface
Technical Features
How It Is Built
- Complete line supplied and commissioned
- Inert technology designed for decorative panels
- High gloss, matt and skin feeling finishes
- Film cost substantially below PET
Specifications
Technical Data
| Parameter | Value |
|---|---|
| Workers needed | 3 persons |
| Line speed | 12-20 m/min |
| Minimum power | 70 kW |
| Working area | 6 x 18 m |
All machines can be customised to the buyer's requirement. Figures are the published data for this model series.
Quality Control
Checked Before It Leaves The Floor
- Surface gloss and feel checked on sample panels for each finish type
- Line speed verified across the range
- Full line run tested before shipment
Customisation Options
Specified Per Order
- Finish type: high gloss, matt or skin feeling
- Line length set to your building
- Panel size range matched to your product
Comparison
How It Compares With The Alternatives
vs PET film lamination
Inert coating reaches the same high gloss look with a film that costs much less than PET
vs Curtain coating plus polishing
The inert line produces the surface directly rather than building and then polishing a thick varnish
Use Guide
Setting The Machine Up For A Run
Decide which finish types you want to offer before the line is configured
Check the 6 x 18 m area and 70 kW supply against your building
Run sample panels for each finish and set them as your standards
Related Machines
180 degree Curve return line Machine Return production Line for woodworking
90 and 180 degree return table that sends the panel back to the operator. Built to order.
View Machine Data →
woodworking panel Automatic Spraying line UV PU paint primer coating top
Full spray line that replaces 8 to 12 painting workers with a crew of three. Built to order.
View Machine Data →
Back Coating Machine For solid wood floor Back Coating Equipment
Seals the underside of solid wood flooring so boards stop cupping in service. Built to order.
View Machine Data →
Questions About This Machine
Is this model set up for high gloss and skin feel surfaces?
Yes. Configured for high gloss and skin feeling surfaces on decorative panel. Every machine is built to order, so the configuration is confirmed against your own panel size and coating system before production.
How many people run the line?
Three.
What is the line speed?
12 to 20 m per minute.
What floor area and power does it need?
A 6 x 18 m working area and a minimum of 70 kW.
What surfaces can the line produce?
High gloss, matt and skin feeling.
How does the cost compare with PET?
The film used is much cheaper than PET.
Ask For A Quotation On The Automatic Inert Coating Line High Glossy Skin Feeling Surface
Send your panel size, coating system and line speed. You will get the model recommendation, full technical data and a price.