Back Coating Machine For solid wood floor Back Coating Equipment
Seals the underside of solid wood flooring so boards stop cupping in service. Built to order.
View Machine Data →
Back Coating Machine
Carpentry Tools Back Coating Machine For Cabinet/Floor Wood precise back coating
Seals the underside of solid wood flooring so boards stop cupping in service. The precise back coating build for cabinet and floor components.
Product Overview
Precise Back Coating Machine For Cabinet And Floor Back Coating
The precise back coating build for cabinet and floor components.
A back coating machine designed for painting the back of solid wood flooring. Correctly applied, the back seal blocks more than 80 percent of the water that would otherwise enter the board from below, so the floor does not deform. The standard build pairs a single roller coater with a double lamp UV dryer. Coating widths are 600, 1000 and 1300 mm.
ICBQ600ICBQ1000ICBQ1300
Key Benefits
What This Machine Changes On Your Floor
1
Four side painting is possible if the moisture proof requirement is higher
2
Sealing the back keeps out over 80 percent of water entering from the underside
3
Boards resist deformation in service, which is what the end customer notices
4
Single roller coater plus double lamp UV dryer in one standard build
Who It Is For
Plants That Buy This Machine
- Solid wood flooring producers exporting to humid climates
- Engineered flooring plants adding a back seal step
- Cabinet makers sealing the underside of worktops and shelves
Problems It Solves
What It Removes From Your Process
- Installed floors cup because moisture enters through the unsealed back
- Warranty claims come back from humid markets months after shipment
- Coating the back by hand doubles the handling on every board
Application Scenarios
Typical Jobs It Runs
Back sealing solid oak flooring before packing
UV back coating MDF panels in a flat line
Sealing the underside of cabinet and floor components
Technical Features
How It Is Built
- Three coating widths on a common frame design
- Single roller coater with double lamp UV dryer as the standard configuration
- Frequency alternator feeding speed control
- Optional absorption unit from 0.75 to 1.1 kW
Specifications
Technical Data
| Parameter | ICBQ600 | ICBQ1000 | ICBQ1300 |
|---|---|---|---|
| Max.Coating Width | 600mm | 1000mm | 1300mm |
| Processing Thickness | 2-90mm | 2-90mm | 2-90mm |
| Feeding Speed Frequency Alternator Frequency Alternator Frequency Alternator Lamp Power o,75kw Fan Power | 5.6kw*2 | 11kw*2 | 1.1kw*2 |
| Absorption Power (optional) | 0.75kw | 1.1kw | 1.1kw |
| TTotal Power | 24.6kw | 24.6kw | 24.6kw |
| Dimension(L x W x H) mm | 1600*1200*1750 | 1785*2300*1640 | 2100*1950*1780mm |
| Net Weight | 1700kg | 1500kg | 1900kg |
All machines can be customised to the buyer's requirement. Figures are the published data for this model series.
Quality Control
Checked Before It Leaves The Floor
- Roller coater film weight checked on sample boards
- UV lamp output verified before shipment
- Feed and dryer synchronisation run tested
Customisation Options
Specified Per Order
- 600, 1000 or 1300 mm coating width
- Four side painting arrangement for higher moisture resistance
- Lamp count in the UV dryer section
Comparison
How It Compares With The Alternatives
vs Leaving the back uncoated
An unsealed back takes on moisture from the subfloor, which is the usual cause of cupping
vs Hand rolling the back
The machine applies a consistent film in one pass and cures it immediately under UV
Use Guide
Setting The Machine Up For A Run
Feed boards back face up through the roller coater
Set film weight for your back sealer
Confirm the UV lamps are up to temperature before the first board
Check cure by a solvent rub on the first board of each batch
Related Machines
Back Coating Machine For MDF UV Back Coating Equipment
Seals the underside of solid wood flooring so boards stop cupping in service. Built to order.
View Machine Data →
180 degree Curve return line Machine Return production Line for woodworking
90 and 180 degree return table that sends the panel back to the operator. Built to order.
View Machine Data →
woodworking panel Automatic Spraying line UV PU paint primer coating top
Full spray line that replaces 8 to 12 painting workers with a crew of three. Built to order.
View Machine Data →
Questions About This Machine
Is this model set up for cabinet and floor back coating?
Yes. The precise back coating build for cabinet and floor components. Every machine is built to order, so the configuration is confirmed against your own panel size and coating system before production.
What board thickness can it handle?
2 to 90 mm.
What is the total power?
24.6 kW.
How much moisture does a back seal keep out?
Correctly applied, the seal prevents more than 80 percent of water entering the floor from the back side.
What is the standard configuration?
A single roller coater with a double lamp UV dryer.
Can all four sides be coated?
Yes. Four side painting gives a better moisture proof result if your market needs it.
Ask For A Quotation On The Carpentry Tools Back Coating Machine for Cabinet/Floor Wood Precise Back Coating
Send your panel size, coating system and line speed. You will get the model recommendation, full technical data and a price.