3 head roller coater machine for UV panel woodworking panel Roller
Three coating groups plus a filling roller for a complete UV build in one pass. Built to order.
View Machine Data →
Industry Application
Finishing Machinery For Panel Furniture Manufacturing
Flat panel plants need throughput. The three head roller coater, the curtain coater and the 5000 square metre a day roller coating line are all built for lines where the coater must not be the bottleneck.
Industry Pain Points
What Goes Wrong In This Sector
- A single head coater means three passes and three handling cycles per panel
- Roller marks in the top coat have to be sanded out before high gloss
- Full sheets are ripped before sanding because the sander is too narrow
- Loading and unloading is the last manual job in an otherwise automatic line
What Buyers Need
Requirements That Follow From Them
- Filler, primer and top coat applied in a single pass
- A mark free top coat route for high gloss work
- 1300 mm sanding width so full sheets are not ripped first
- Automatic loading and palletising
Recommended Machines
Equipment That Applies To This Industry
Three Heads Paint Roller Coater Machine roller coating machine for wood
Three coating groups plus a filling roller for a complete UV build in one pass. Built to order.
View Machine Data →
Automatic Curtain Coating Machine for Woodworking Painting
Falling curtain of varnish that lays a film down to 0.05 mm with no roller marks. Built to order.
View Machine Data →
Woodworking UV Painting Curtain Coating Machine
Falling curtain of varnish that lays a film down to 0.05 mm with no roller marks. Built to order.
View Machine Data →
Solid Wood Sander Wide Belt Sanding Machine
Three head floating sander for full width panels up to 1300 mm. Built to order.
View Machine Data →
Solid Wood Sander Wide Belt Brush Sanding Machine
Three head floating sander for full width panels up to 1300 mm. Built to order.
View Machine Data →
Automatic heavy duty gantry loading machine gantry type loading stacker loading
Vacuum gantry that strips, palletises and moves panels up to 200 kg. Built to order.
View Machine Data →
gantry loading machine Automatic loading and unloading system
Vacuum gantry that strips, palletises and moves panels up to 200 kg. Built to order.
View Machine Data →
Delivery Capability
How The Order Runs
1
Machines matched so coater speed and dryer capacity line up
2
Gantry loader configured with the vacuum pad type your board needs
3
Line commissioned and run at rated speed before shipment
Related Solutions And Reading
UV Flat Panel Coating Line
Open page →
Membrane Press Door Front Production
Open page →
Flooring Surface And Back Seal
Open page →
What Is Inside An INCRI Roller Coating Machine
Open page →
How To Choose A Wide Belt Sander For A Finishing Line
Open page →
Roller Coating Curtain Coating Or Spraying Which One Fits Your Panel
Open page →
Panel Furniture Manufacturing Questions
Can I use just one of the three heads?
Yes. Each group has its own frequency converter and can be used alone.
What is the paint film thickness?
5 to 10 g/m2.
How thin a film can it lay?
The coating can reach 0.05 mm.
What paints can I run?
PU and UV, for both primer coating and top coating.
Do you have machines in our country?
Machines have been sold to more than 20 countries, including Russia, Singapore, Uzbekistan, the USA, Malaysia, Peru, Colombia, Vietnam and Slovakia.
Do you offer installation?
Machines are almost fully assembled before they are loaded into the container, so installation in your workshop is straightforward. Video guidance and an English manual are provided free. An engineer can be sent to site on request, with all costs in the buyer's account: two way transport between China and your factory, visa and insurance, hotel and meals in your country, plus USD 200 per day labour.
Planning A Line For Panel Furniture Manufacturing
Send your product mix and output target. We will draw a layout against your building and quote the machine list.