Semi-Finished S/FTP CAT5e LAN Cable
Double Shielded CAT5e Core for Electrically Noisy Sites
View specifications →
24 AWG Cores In UTP FTP And S FTP
CAT5e cores use 24 AWG solid bare copper at 0.51 mm nominal with HDPE insulation, specified to 100 MHz and 1000BASE-T over 100 metres. Three shielding levels are available on the same electrical platform: plain UTP for cost-led work, FTP with an overall foil for moderate interference, and S/FTP with foil on every pair plus a braid for genuinely noisy sites.
Double Shielded CAT5e Core for Electrically Noisy Sites
View specifications →Foil Shielded CAT5e Core for Moderate EMI Environments
View specifications →Unjacketed CAT5e Core for High Volume LAN Cable Production
View specifications →
UTP, FTP and S/FTP on the same 24 AWG platform.
Diameter stated per construction so the jacket line is set correctly first time.
NEXT, PSNEXT, return loss, attenuation, delay skew and propagation delay given per construction.
Typical minimum of 3,000 to 5,000 metres per type.
Solid bare copper, 24 AWG at 0.51 mm nominal, to IEC 60228 Class 1.
UTP with no shield, FTP with an overall Al/PET foil and drain wire, and S/FTP with foil on each pair plus a tinned copper braid.
100 MHz, supporting 100BASE-T and 1000BASE-T over 100 metres.
1,000 m or 2,000 m wooden drums, PE film-wrapped.
Send the construction, grade and quantity. We confirm the specification before quoting so there is nothing to unpick later.