Dental Milling Machines
Five-axis milling of zirconia wax PMMA and PEEK at 30,000 RPM.
The DTR-55 is a 5-axis dental milling machine for laboratories. Simultaneous multi-axis milling produces detailed restoration geometry in one setup, and the machine processes zirconia, wax, PMMA, PEEK and other materials for crowns, bridges, implants and dentures. Spindle speed reaches 30,000 RPM, an automatic tool-changing system limits downtime, and a touchscreen with one-click calibration keeps setup simple.
The range
All 1 Products In This Group
The problem
What This Group Is Built To Solve
A 3 or 4-axis machine has to be re-fixtured to cut an angled implant channel or an undercut, and every re-fixture costs both time and repeatability. On a lab running a mixed caseload, that is the difference between milling in-house and continuing to outsource.
Who buys these
Who This Range Is For
Dental Laboratories
The machine is built for the demands of modern dental laboratories producing a mixed caseload of restorations.
Labs Running Several Materials
Zirconia, wax, PMMA and PEEK on one machine means one operator and one workflow instead of separate cells.
Practices Milling In-House
Touchscreen control and one-click calibration keep the machine usable by clinical staff rather than only by a technician.
Why these
What Makes This Range Different
Five Axes Milling Simultaneously
Simultaneous multi-axis motion cuts undercuts and angled implant channels in one setup, which is where lesser machines lose both time and accuracy.
One Machine Across Five Materials
Zirconia, wax, PMMA, PEEK and more run on the same spindle, covering crowns, bridges, implants and dentures without a second machine.
30,000 RPM With Automatic Tool Change
High spindle speed gives the surface finish on zirconia; the tool changer keeps the machine cutting instead of waiting for an operator.
One-Click Calibration
This removes the setup step that most often goes wrong in a busy lab and takes the machine out of tolerance without anyone noticing.
Application
Where These Products Are Used
- Milling zirconia crowns and bridges
- Producing wax patterns for casting
- Machining PMMA temporaries and try-ins
- Cutting PEEK frameworks for implant work
- Producing denture bases and components
- Bringing outsourced milling back in-house
Documentation
Downloads Covering This Group
Specification sheet PDFs already on file for products in this range.
Industries
Sectors That Specify This Group
Dental Clinics and Laboratories
Imaging, magnification, treatment units and milling for clinics and labs.
FAQ
Dental Milling Machines Questions
Which materials can it mill?
Zirconia, wax, PMMA, PEEK and more, for crowns, bridges, implants, dentures and other restorations.
What spindle speed does it reach?
Up to 30,000 RPM.
Does it change tools automatically?
Yes, with an efficient tool-changing system designed to minimise downtime.
How is it calibrated?
One-click automatic calibration through the integrated touchscreen display.
How heavy is the machine?
87 kg, with a depth of 628.5 mm. Confirm bench loading before installation.
Is wet cutting supported?
Wet cutting of zirconia is part of the intended workflow. Confirm your coolant and filtration arrangement at order.
Get A Quotation On Dental Milling Machines
Send the capacity you need, the products it will handle and the destination, and we will confirm configuration, materials and a container plan.