All Products
Every part family Eurona supplies, grouped by process route, with the published material grades, weight ranges and inspection scope on each page.
Steel Castings and Forgings
Heavy load and high strength steel parts from 50 kg to 50 tonnes, covered by melting records, heat treatment, NDT and full quality documents.
Large Steel Structural Castings
Load bearing steel castings up to 20 tonnes
View specifications
Slewing Support Structural Castings
Rotating support bodies with machined bearing seats
View specifications
Forged Shafts
Stepped shafts with continuous grain flow
View specifications
Flanges and Sleeve Components
Connection flanges and sleeve bodies
View specifications
Large Gear Rings
Cast and forged ring gears for heavy drives
View specifications
Wheel Discs and Impeller Components
Rotating discs and vaned wheels
View specifications
Gears and Transmission Components
Toothed and drive line components
View specifications
Fork Brackets and Connectors
Forked lugs and pin joint connectors
View specifications
Batch Machined Disc Components
Repeat disc parts in series production
View specifications
Ring and Sleeve Forgings
Seamless rolled rings and forged sleeves
View specificationsHigh Alloy Parts
Stainless and heat resistant components for food machinery, incineration grate bars, screw pump rotors and biomass furnaces.
Stainless Steel Vessel Components
Cast and machined stainless vessel bodies
View specifications
Rotating and Drive Components
Stainless shafts and drive parts for hygienic equipment
View specifications
Assembled Machinery Components
Multi part stainless assemblies
View specificationsPrecision Machined Structural Parts
Close tolerance stainless structures
View specifications
Typical Grate Bar Castings
Heat resistant bars for incineration grates
View specifications
Grate Bars and Heat Resistant Assemblies
Bars, liners and heat resistant sets
View specifications
Volume Grate Bar Production
Repeat batch supply of consumable bars
View specifications
Grate Bar Packing and Delivery
Export packing for heavy consumable parts
View specifications
Screw Pump Rotor Series
D, 2L6 and 2L8 series rotors
View specifications
Volume Rotor Production
Series rotor supply for pump builders
View specifications
Rotor Machining and Dimensional Inspection
Profile machining with measured verification
View specifications
Rotor Hardness and Quality Testing
Hardness verification on finished rotors
View specifications
Heat Resistant Furnace Components
Castings for continuous high temperature service
View specifications
Biomass Furnace Castings
Heat resistant bodies for biomass boilers
View specifications
Furnace Grate Components
Grate sections for biomass combustion
View specifications
Heat Resistant Cylindrical Components
Tubes, sleeves and cylindrical furnace parts
View specificationsPrecision Casting
Silica sol lost wax and quick-drying investment casting from 0.01 kg to 300 kg, holding CT5 - CT9 and Ra 3.2 - Ra 6.3.
Thin Wall and Curved Components
Light sections and swept profiles
View specifications
Lifting and Connection Components
Eyes, links and load carrying connectors
View specifications
Shaft and Operating Components
Levers, spindles and actuating parts
View specifications
Inspection and Assembly Components
Parts qualified on the measuring machine
View specifications
Connection and Support Structures
Bracket and support structures
View specifications
Complex Curved Surface Parts
Free form geometry as cast
View specifications
Construction Machinery Parts
Precision cast parts for engineering equipment
View specifications
Shaped Functional Structural Parts
Non standard shapes with built in function
View specificationsAluminum Alloy Casting
Sand, gravity, high pressure and low pressure aluminium casting with machining, welding and surface finishing in one route.
Lightweight Structural Components
Weight reduction without losing section strength
View specifications
Wheel Discs and Rotating Components
Spoked discs and rotating aluminium parts
View specifications
Aluminum Housing Components
Enclosures, covers and pressure tight housings
View specifications
Frames and Appearance Components
Visible frames and finished surfaces
View specificationsPrecision Forging
Closed die forging on 300 T - 8000 T presses, rolled rings up to 9000 mm diameter and open die forging for large parts.
Precision Die Forged Shafts
Die forged shafts from 0.2 kg to 100 kg
View specifications
Closed Die Forged Connectors
High volume forged connection parts
View specifications
High Strength Connection and Lifting Components
Rated lifting and connection hardware
View specifications
Agricultural Machinery Forgings
Seasonal volume forgings for farm equipment
View specifications
Rolled Ring Forgings
Seamless rings to 9000 mm diameter
View specificationsCast Iron
Grey iron, ductile iron and ADI castings from 0.2 kg to 2000 kg in green sand, resin sand and shell moulding.
Mechanical Wear and Conveying Components
Screws, flights and wear surfaces
View specifications
Ductile Iron Structural Brackets
Ductile iron support structures
View specifications
Disc Type Iron Castings
Flat discs, plates and covers
View specifications
Wheel and Transmission Components
Pulleys, wheels and drive iron parts
View specifications
Disc Base Iron Castings
Base plates with integral bosses
View specifications
Grate and Panel Iron Castings
Ribbed panels, grids and screen plates
View specifications
Pump and Valve Housing Castings
Pressure carrying iron bodies
View specifications
Cylinder and Structural Shell Components
Tubular bodies and shell structures
View specificationsQuestions About The Product Range
How many products can you supply?
This catalogue lists 51 product pages across 6 process families. Parts outside the list are quoted against your drawing using the same process routes.
Are the specifications on each product page the published ones?
Yes. Material grades, weight ranges, tolerance grades and process routes are the figures published for that process family. Values not published are marked TBC rather than estimated.
Can you quote a part that is not listed here?
Yes. The process families cover 0.01 kg to 50 tonnes across casting, forging, machining and welded structures. Send the drawing and the application and a route will be proposed.
Cannot Find The Part You Need
The listed products show what the process families produce. Send a drawing and we will match it to the right route and production base.