Skip to content

Solution

OEM and Private Label Kits

Kits packed to your bill of materials with your brand on the carton the instruction sheet and every bag

Get a Custom SolutionDownload Catalogue
OEM and Private Label Kits

The Problem

Why This Is Harder Than It Looks

Most cable accessory brands do not make the material inside their kits. We do. That is what makes private label work straightforward here: the electrical layers, the molded parts and the packing all happen in the same plant, so a change to a wall thickness or a kit content list does not have to travel through three suppliers.

Process

From Requirement to Delivered Product

Design material selection prototyping production quality control packing logistics and after sales

  1. 01

    Design

    Start from your bill of materials or from ours. We will tell you honestly where a content list is over specified or where a component is missing.

  2. 02

    Material Selection

    Every electrical layer is our own compound so a wall thickness a shrink ratio or a colour can be changed without asking a third party.

  3. 03

    Prototyping

    A sample kit is packed and shipped for your approval before any production run. Instruction sheet artwork is proofed at the same time.

  4. 04

    Production

    Compounding extrusion radiation cross linking expansion molding and packing all in Dalian under one quality system.

  5. 05

    Quality Control

    Per lot testing in our own laboratory. Each carton carries a production record that traces back to the compound lot.

  6. 06

    Packing

    Your branding on the carton the instruction sheet and the individual component bags. Barcode and part number schemes to your specification.

  7. 07

    Logistics

    Consolidated shipments across multiple part numbers. Export documentation prepared with the shipment.

  8. 08

    After Sales

    Your customers contact you. We support you behind the scenes with technical answers and replacement components.

Products

Products Used in This Solution

C1 Low Voltage Heat Shrink Cable Accessory Kits 0.6/1 kV
C1

LV Kits 0.6/1 kV

Complete 1 kV termination and joint kits for 1 to 6 core cable from 4 mm² to 400 mm² supplied as a single part number

VIEW DETAILS
C15 Medium Voltage Heat Shrink Cable Accessory Kits 8.7/15 kV
C15

MV Kits 8.7/15 kV

Indoor outdoor and joint kits for 8.7/15 (17.5) kV single core and three core cable tested to IEC 60502-4

VIEW DETAILS
C35 Medium Voltage Heat Shrink Cable Accessory Kits 26/35 kV
C35

MV Kits 26/35 kV

The highest voltage class in the range covering 26/35 (40.5) kV single core and three core cable to 630 mm²

VIEW DETAILS
C101 Non Tracking Heat Shrink Tube for Cable Terminations
C101

C101 Non Tracking Tube

Red anti tracking outer insulation for indoor and outdoor terminations and joints from 6 kV to 36 kV

VIEW DETAILS
C102-10 Stress Control Heat Shrink Tube up to 24 kV
C102-10

C102-10 Stress Control

High permittivity black tubing that redistributes the electrical field at the screen cut back on 6 to 24 kV cable

VIEW DETAILS
C105 Semi Conductive and Insulation Double Layer Heat Shrink Tube
C105

C105 Double Layer Tube

Co extruded heavy wall tube that restores insulation and the outer semiconductive screen in one operation up to 36 kV

VIEW DETAILS
Y1 Heat Shrink Breakout Boots for Multi Core Cable
Y1

Y1 Breakout Boots

Molded two three four and five leg boots with adhesive on the big end and every leg for 1 kV to 36 kV cable

VIEW DETAILS
Y3 Non Tracking Heat Shrink Rain Sheds for Outdoor Terminations
Y3

Y3 Rain Sheds

Red anti tracking skirts with mastic collars that build creepage distance on outdoor terminations from 1 kV to 36 kV

VIEW DETAILS

Outcomes

What You Get

  • A kit range under your brand without building a factory
  • Content lists that you control rather than inherit from a supplier catalogue
  • Traceability from a delivered carton back to the compound lot
  • Artwork barcode and part number schemes to your specification
  • One supplier for kits components and molded parts

FAQ

OEM and Private Label Kits Frequently Asked Questions

What is the minimum quantity for private label
It depends on the configuration. Carton and bag printing carry a setup so the minimum is higher than for standard product. Send us the kit list and the annual volume and we will quote realistically.
Can we change the kit contents
Yes. That is the main reason customers move to private label. Tell us what your market actually needs and we will pack that rather than a generic list.
Do you print our instruction sheet
Yes. We supply illustrated instruction artwork that you can rebrand or we will print your own artwork.
Will you sell the same kit to our competitors
Standard catalogue product is available to anyone. A kit configuration developed specifically for you with your content list and artwork is yours.
Can you supply test reports under our name
We supply the test data for the components. How you present it in your own documentation is your decision.
What is the lead time for a first private label run
Sample and artwork approval typically takes 15 to 20 working days then production runs 20 to 30 working days. Repeat orders are much faster.

Still need an answer ask our engineers on WhatsApp

Other Solutions

Explore the Rest

Medium Voltage Cable Jointing

Rebuilding insulation screen and sealing across a jointed conductor from 6 kV to 36 kV

Cable Termination Indoor and Outdoor

Field grading anti tracking insulation and creepage from 0.6/1 kV to 26/35 kV

Switchgear and Busbar Insulation

Raising internal clearance inside compact switchgear and covering the joints a tube cannot reach

Emergency Cable Repair

Restoring a damaged jacket in place without cutting the cable or disturbing the terminations

Custom Formulation and Tooling

Changing a wall thickness a shrink ratio a colour or a molded shape when the catalogue does not fit

Start a Conversation About OEM and Private Label Kits

Send a drawing a cable schedule or a photograph. Our engineers answer directly on WhatsApp with no sales gatekeeper.

Talk to an Engineer Email Us Project Cases