Product Category
Heat Shrink Cable Accessory Kits
Complete termination and joint kits from 0.6/1 kV to 26/35 kV supplied as one part number
3 PRODUCTS · MANUFACTURED IN DALIAN CHINA
Range
All Cable Accessory Kits
Three kit families covering the full low and medium voltage range with indoor outdoor and joint versions in every voltage class
LV Kits 0.6/1 kV
Complete 1 kV termination and joint kits for 1 to 6 core cable from 4 mm² to 400 mm² supplied as a single part number
VIEW DETAILS
MV Kits 8.7/15 kV
Indoor outdoor and joint kits for 8.7/15 (17.5) kV single core and three core cable tested to IEC 60502-4
VIEW DETAILS
MV Kits 26/35 kV
The highest voltage class in the range covering 26/35 (40.5) kV single core and three core cable to 630 mm²
VIEW DETAILSWho It Is For
Who Buys This Category
Distribution Utilities
Network operators who need an accessory family approved against IEC 60502-4 and GB/T 12706.4 for their whole voltage range.
EPC and Installation Contractors
Project teams buying one accessory family across a substation feeder or collector system.
Industrial Plant Maintenance
Sites that hold their own MV spares and joint their own cable during planned shutdowns.
Renewable Energy Developers
Solar and wind projects making hundreds of identical terminations in a compressed schedule.
Problems Solved
Problems This Category Removes
Loose Components Mean Missing Parts on Site
A kit contains every consumable for one termination or joint with a pack list so nothing is discovered missing in a trench.
Resin Joints Will Not Cure in Cold or Wet Conditions
Heat shrink kits are energisable as soon as they cool regardless of ambient temperature.
Approval Evidence Is Demanded Before a Utility Will Accept an Accessory
C15 and C35 are designed against the full IEC 60502-4 termination and joint test sequences.
Crews Have to Relearn a Method for Every Product
All three kit families share the same installation logic so a jointer qualified on one is competent across the range.
Application Scenarios
Where This Category Is Used
Ring Main Unit and Switchgear Terminations
Indoor terminations into cable boxes at 15 kV and 35 kV class.
Overhead to Underground Transitions
Outdoor pole terminations with rain sheds for creepage.
Duct and Manhole Joints
Straight through joints tested for 30 cycles under 1 m of water.
LV Distribution Boards and Street Cabinets
1 kV terminations on 2 to 6 core cable.
Renewable Collector Circuits
Repeated terminations at collector switching stations.
Industrial Plant Feeders
MV distribution inside steel plants mines and process facilities.
Why UPM
Why Buy This Category from Us
24 years of heat shrink manufacturing with compounding extrusion irradiation and molding in one plant
- Kits are packed to a bill of materials we control rather than assembled from bought in parts
- The electrical layers inside the kit are our own compounds extruded and irradiated in our own plant
- Full IEC 60502-4 and GB/T 12706.4 test evidence available for utility approval submissions
- Private label packing instruction sheets and carton printing available
- Standard configurations ship in 5 to 10 working days from Dalian
Selection
How to Choose Within This Category
-
01
Fix the Voltage Class
0.6/1 kV takes C1. 8.7/15 (17.5) kV takes C15. 26/35 (40.5) kV takes C35. Match the cable U0 rating not the nominal system voltage.
-
02
Decide Termination or Joint
Terminations start NSY indoor or WSY outdoor. Joints start JSY.
-
03
Count the Cores
C1 covers 1 to 6 cores. C15 and C35 cover 1 and 3 core cable.
-
04
Read the Conductor Band
Bands are printed in the selection table on each product page. The last digit of the part number encodes the band.
-
05
Confirm the Environment
Outdoor terminations in polluted coastal or dusty sites need extra Y3 rain sheds. Tell us the site and we will increase the count.
-
06
Send Us the Data to Confirm
Message the cable datasheet on WhatsApp and we will verify the part number before you order.
FAQ
Cable Accessory Kits Frequently Asked Questions
Which kit do I need for an 11 kV three core 240 mm² cable termination
Are lugs and connectors included in the kit
Can you supply kits printed with our own brand
What test evidence can you provide
How should kits be stored
Do you provide installation training
Still need an answer ask our engineers on WhatsApp
Other Categories
Explore the Rest of the Range
Stress Control and Insulation Tubes
The electrical layers inside every medium voltage joint and termination sold as bulk components
3 PRODUCTSMolded Cable Parts
Breakout boots end caps and rain sheds molded to shape for the points a straight tube cannot cover
4 PRODUCTSMedium and Heavy Wall Tubing
Adhesive lined polyolefin tubing for sealing insulating and mechanically protecting cable up to 36 kV
7 PRODUCTSBusbar Insulation and Covers
Tubing and molded covers that raise clearance inside switchgear and on overhead lines
2 PRODUCTSCable Repair and Tape
Wraparound sleeves and heat shrink tape that restore a damaged jacket without cutting the cable
Talk to Us About Cable Accessory Kits
Send your cable data drawing or bill of materials and we will return part numbers pricing and a lead time.