Product Display Stand 2 Layers Cardboard New Design No MOQ
Retail display stands built from paperboard and corrugated board in counter and floor formats, printed full colour or to Pantone by offset, silk screen and oil printing. Two and three layer counter units are the common builds, with plastic hooks added for hanging packs such as socks and accessories, and surfaces finished in glossy or matte lamination or UV. Prototype templates come back in 2-3 days and MOQ is 1 pc, so a display concept can be proven in a single store before a national rollout.
What This Product Gives You
- MOQ of 1 pc lets a display be trialled in one store before the buyer commits budget to a chain rollout
- A prototype in 2-3 days with an artwork template means design work starts from real dimensions rather than guesses
- Pantone printing holds pack colours that a four-colour process build would shift
- Plastic hooks turn a flat counter unit into a hanging display for socks, accessories and blister packs
- Recycled corrugated board keeps the unit inside retailers' packaging waste policies
- Lamination and UV protect the printed face from handling in a busy aisle
Where It Is Used and Who Buys It
Application Scenarios
- Counter-top cosmetic displays for lipstick, hand cream and makeup
- Hanging hook displays for socks and small accessories
- Incense, confectionery and impulse-buy counter units
- Supermarket and pharmacy promotional end caps
- Trade show product demonstration stands
Who It Is For
- Brand owners launching a product into retail
- Retail merchandising and category managers
- Cosmetic and personal care brands
- Distributors and agencies running in-store promotions
- Packaging buyers specifying point of sale material
What Goes Wrong Without It
- Suppliers who will not quote below hundreds of units block a single-store display trial
- Designing to a guessed dieline means the first sample comes back the wrong size and the schedule slips
- Process-printed displays miss a brand's Pantone and sit visibly wrong next to the pack
- Unlaminated board scuffs and tears within days on a busy counter
- A flat shelf unit cannot present hanging packs, so socks and accessories fall over
Technical Features
- Construction in paperboard and corrugated board from recycled material
- Two and three layer counter and floor builds
- Offset, silk screen and oil printing
- Full colour and Pantone colour printing
- Plastic hooks for hanging packs
- Surface treatment by glossy lamination, matte lamination or UV
- Artwork template supplied with the prototype
Specification
| Product Name | Corrugated cardboard display stand |
|---|---|
| Material | Paperboard, corrugated board |
| Feature | Recycled materials |
| Layers | 2 layer and 3 layer builds |
| Printing | Offset printing, silk screen printing, oil printing |
| Colour | Full colour printed or Pantone printed |
| Surface Treatment | Glossy lamination, matte lamination, UV |
| Accessories | Plastic hooks |
| Design | Customised |
| Usage | Brand exposure and promotion |
| Prototype Time | 2-3 days with artwork template |
| Lead Time | 10-12 days |
| Production Lead Time | 12-15 days |
| MOQ | 1 pc |
Materials and Manufacturing Process
Materials
- Corrugated board
- Paperboard
- Plastic hooks
Manufacturing Process
- Structural design and dieline
- Prototype cutting and template issue
- Offset or silk screen printing
- Lamination or UV coating
- Die cutting and creasing
- Hook fitting
- Flat packing
How This Job Is Checked
- Structural prototype assembled and load checked before the artwork is committed
- Pantone colours matched by hand against the approved proof on press
- Die cut and crease positions measured against the approved dieline
- Assembled units stood up and checked for stability before flat packing
- Photographs of the finished displays sent for approval before shipment
What You Can Change
- Structure designed to your product dimensions and shelf count
- Layer count specified as 2 or 3 tiers for counter or floor use
- Pantone colour matching to your existing pack artwork
- Plastic hooks fitted where hanging packs are being merchandised
- Surface finished in glossy lamination, matte lamination or UV
- Flat-pack format so the display ships and stores compactly
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Acrylic or metal display fixture | Cardboard costs a fraction and can be replaced every campaign, while acrylic and metal survive years of permanent placement |
| Full colour process printing | Pantone printing matches an existing pack colour exactly, though process printing is cheaper on complex photographic artwork |
| Pre-assembled display | A flat-packed unit ships far cheaper and stores in a stockroom, while a pre-assembled stand needs no store labour to set up |
Getting the Best Result
- Ask for the prototype and artwork template first, then design onto the real dieline
- Send Pantone references rather than screenshots if the display must match an existing pack
- Specify the product weight per shelf so the board grade and layer count are correct
- Add plastic hooks for any pack that hangs rather than stands
- Choose matte lamination where store lighting causes glare on the printed face
- Allow 10-12 days lead time, or 12-15 days where the structure is new
Other Products in This Group
3D PVC Desktop Embossed Durable High Density New Materials
PVC Foam Board Sign 3-15mm Durable Anti-UV Foam Signs
Custom Canopy Tent for Expo With Back Wall Dye-sublimation Printing
Retractable Banners Roll up Advertising Big Stands 4x8ft
Product Display Stand 2 Layers Cardboard New Design No MOQ FAQ
What is the minimum order?
1 pc. A single display can be produced to trial a concept in one store before a chain rollout.
How long is the lead time?
10-12 days on a standard order, and 12-15 days production where a new structure is involved. The prototype comes back in 2-3 days.
What material do you use?
Paperboard and corrugated board made from recycled material, which keeps the unit inside most retail packaging waste policies.
Can you match our exact brand colour?
Yes, by Pantone printing rather than four-colour process, which is what keeps the display consistent with the pack beside it.
Can it hold hanging products?
Yes. Plastic hooks are fitted for socks, accessories and blister packs that need to hang rather than stand.
What surface finishes are available?
Glossy lamination, matte lamination and UV. Matte is the usual choice under bright store lighting.
Do you supply an artwork template?
Yes, the template guideline is issued with the prototype so your designers work to the real dieline from the start.
Quote Product Display Stand 2 Layers Cardboard New Design No MOQ
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.