Custom Canopy Tent for Expo With Back Wall Dye-sublimation Printing
A foldable pop-up canopy tent that works as portable shelter and as a printed branding wall at the same time. The frame is steel for economy or aluminium where weight and rust resistance matter, in hexagonal or square tube from 1.0 mm to 2.0 mm wall thickness, and the canopy is 420D or 600D polyester or Oxford fabric with a PU or PVC coating for waterproofing. Bought by exhibition contractors, event marketers and brand teams who need a stand that one crew can raise and strike in a morning.
What This Product Gives You
- The printed canopy and back wall turn a shelter into a full branding display so you are not buying two separate items
- A foldable pop-up frame goes up without tools, which keeps setup labour off the event budget
- Aluminium frames cut carry weight for teams that fly to shows, while steel keeps the cost down for fixed venues
- PU or PVC coating on the fabric keeps rain off stock and staff at outdoor markets
- Hexagonal and square tube profiles resist twisting better than round tube under wind load
- Three standard footprints plus fully custom sizes mean the tent matches the pitch you have booked
Where It Is Used and Who Buys It
Application Scenarios
- Trade show and exhibition stands at outdoor venues
- Street marketing and sampling activations
- Festival and food market vendor pitches
- Corporate hospitality and sports event hosting
- Product launches and dealer open days
Who It Is For
- Event and exhibition contractors buying reusable stand kits
- Marketing agencies running roadshow and activation tours
- Brand owners equipping regional sales teams
- Promotional product distributors reselling branded shelters
- Sports clubs and festival organisers fitting out vendor rows
What Goes Wrong Without It
- Plain white hire tents carry no branding, so the stand looks identical to every neighbour on the row
- Thin-walled frames bend the first time a gust catches an unweighted canopy
- Uncoated fabric wicks rain through the seams and soaks display stock underneath
- A tent sized to the supplier's stock rather than the booked pitch either overhangs or leaves dead space
- Frames that need tools and a full crew push setup into paid overtime the night before a show
Technical Features
- Foldable pop-up frame with printed canopy and back wall as one system
- Frame material selectable between steel and aluminium
- Frame tube wall thickness from 1.0 mm to 2.0 mm in hexagonal or square profile
- Canopy fabric in 420D or 600D polyester or Oxford, PU or PVC coated
- Back wall supplied as a full wall, half wall or detachable panel
- Height adjustment over several fixed levels on the leg sections
Specification
| Primary Function | Portable shelter with full branding display |
|---|---|
| Main Structure | Foldable pop-up frame, printed canopy, back wall |
| Frame Material | Steel or aluminium |
| Frame Thickness | 1.0 mm to 2.0 mm |
| Frame Tube Shape | Hexagonal or square |
| Standard Sizes | 10x10 ft (3x3 m), 10x15 ft, 10x20 ft |
| Custom Sizes | Made to your dimensions |
| Canopy Material | 420D or 600D polyester, Oxford fabric |
| Fabric Coating | PU or PVC |
| Back Wall Type | Full wall, half wall or detachable panel |
| Height Adjustment | Several fixed levels |
| Artwork Formats | AI, PDF, PSD, EPS |
| Printing | Dye-sublimation |
Materials and Manufacturing Process
Materials
- Steel
- Aluminium
- 420D polyester
- 600D polyester
- Oxford fabric
- PU coating
- PVC coating
Manufacturing Process
- Artwork preflight
- Dye-sublimation fabric printing
- Cutting and sewing
- Frame fabrication and finishing
- Fit-up and trial assembly
- Packing into carry bag
How This Job Is Checked
- Artwork preflighted and a PDF proof approved in writing before fabric is printed
- Printed colour compared by hand against the approved proof
- Frame sections trial assembled to confirm the canopy fits before packing
- Seams and coated fabric checked for pinholes and skipped stitching
- Photographs of the finished tent sent for approval before shipment
What You Can Change
- Full colour dye-sublimation print across canopy panels, valance and back wall
- Frame upgraded from steel to aluminium where crews carry the kit
- Frame wall thickness chosen between 1.0 mm and 2.0 mm for the wind exposure at your venues
- Back wall specified as full, half or detachable so the stand can open on more sides
- Footprint made to a non-standard size when the booked pitch is not 10 ft square
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Plain hire canopy | A printed tent carries your branding permanently, though a hire unit avoids storage between events |
| Modular hard-wall exhibition booth | The pop-up tent goes up in minutes with no build crew, while a hard booth gives a stronger indoor wall and more fitting options |
| Steel frame version | Aluminium costs more but is lighter to carry and does not rust after a wet season outdoors |
Getting the Best Result
- Send artwork as AI, PDF, PSD or EPS with fonts outlined and the canopy panel shapes on separate layers
- Measure the booked pitch before choosing between 10x10 ft, 10x15 ft and 10x20 ft
- Specify aluminium if the kit will be flown or carried by one person
- Add weights or ground stakes at every leg for any outdoor pitch
- Dry the fabric fully before folding it back into the bag to avoid mildew marks
- Order the back wall as a detachable panel if you want the option of an open-backed stand
Other Products in This Group
Custom Canopy Tent for Expo With Back Wall Dye-sublimation Printing FAQ
What sizes do you make?
Standard footprints are 10x10 ft (3x3 m), 10x15 ft and 10x20 ft. Custom sizes are made to your dimensions.
Should I choose steel or aluminium?
Steel is the economical option for tents that stay at one venue. Aluminium is lighter and rust-resistant, which suits touring kits.
Is the canopy waterproof?
The 420D or 600D polyester or Oxford fabric is coated with PU or PVC, which is what gives the canopy its water resistance.
How is the branding applied?
By dye-sublimation, so the colour is in the fabric rather than sitting on top of it as a printed film.
Can I have a stand without a solid back?
Yes. The back wall can be supplied as a full wall, a half wall or a detachable panel you remove when you want the stand open.
What artwork do you need?
AI, PDF, PSD or EPS at 300dpi minimum with all fonts saved as outlines.
What are the payment terms?
PayPal, bank transfer or Western Union, with a 30-50% deposit before production and the balance before shipment.
Quote Custom Canopy Tent for Expo With Back Wall Dye-sublimation Printing
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.