Vinyl Print Stickers New Frosted Labels Strong 3M Adhesive
Frosted vinyl print stickers are PVC or PET labels with a textured matte face that gives the surface a distinct touch as well as a non-reflective look. The material is a high temperature hot melt type, so once applied it keys into the surface and cannot easily be pulled away, which is why it is specified for consumer electronics housings. Printing is by offset, silkscreen or UV press in CMYK or PMS spot colour, with lamination as the surface finish and a choice of permanent or removable adhesive. The source specification states ISO9001 certification for this item.
What This Product Gives You
- The frosted texture removes glare from a screen bezel or control panel where a glossy label would reflect room lighting
- A hot melt adhesive keys into the housing so the label resists being picked at by end users
- Removable adhesive is available where a label has to come off cleanly at service or resale
- Silkscreen printing lays down opaque colour that stays solid on dark electronics housings
- Lamination protects the print from fingerprints and cleaning on a surface that gets touched daily
- Express delivery in 4-5 working days keeps a product launch from waiting on decorative labels
Where It Is Used and Who Buys It
Application Scenarios
- Control panel and bezel labels on speakers, projectors and home appliances
- Branding and model labels on mobile phones and phone accessories
- Identification labels on cameras, earphones and smart watches
- Decorative overlays on computers and consumer electronics housings
- Rating and instruction labels on smart electronics
Who It Is For
- Consumer electronics OEMs specifying housing decoration
- Appliance manufacturers labelling control panels
- Accessory brands decorating phone and audio products
- Industrial design teams matching a label finish to a product surface
- Procurement engineers sourcing labels with a defined adhesive behaviour
What Goes Wrong Without It
- Glossy labels on a control panel throw reflections that make printed legends hard to read
- Labels with weak adhesive lift at the corner once a user runs a thumb across them
- Permanent labels have to be scraped off during service, damaging the housing
- Light-coloured artwork disappears on a dark housing unless an opaque ink layer is printed
- Printed detail on a frequently touched surface wears away without a protective laminate
Technical Features
- Frosted textured face on PVC or PET film
- High temperature hot melt adhesive that bonds to varied surfaces
- Offset, silkscreen and UV printing
- CMYK process and PMS spot colour
- Lamination as surface finishing
- Permanent or removable adhesive specified per job
Specification
| Material | PVC or PET film, frosted surface |
|---|---|
| Use | Mobile phones and accessories, speakers, cameras, earphones, smart watches, home appliances, computers, projectors |
| Colour | CMYK colour and PMS spot colour |
| Size | Customised |
| Surface Finishing | Lamination |
| Printing | Offset, silkscreen and UV printing |
| Adhesive | Permanent or removable |
| Adhesive Type | High temperature hot melt |
| Feature | Waterproof, frosted texture |
| Certification | ISO9001 |
| Delivery via Express | Generally 4-5 working days |
| Delivery via Air | Generally 5-7 working days |
Materials and Manufacturing Process
Materials
- PVC film
- PET film
Manufacturing Process
- Artwork preflight
- Offset, silkscreen or UV printing
- Lamination
- Die cutting
- Manual inspection
- Packing
How This Job Is Checked
- Files are preflighted and a PDF proof approved before any printing starts
- Spot colours are matched against the approved PMS reference on press
- Adhesion is checked on the intended substrate before the run is released
- Every finished label is checked by hand for print defects and cut accuracy
- Photographs of the finished goods are sent for approval before shipment
What You Can Change
- Any customised size and die cut outline
- CMYK process or PMS spot colour matching
- Permanent or removable adhesive selected for the application
- Offset, silkscreen or UV printing chosen to suit coverage and detail
- Lamination finish specified over the frosted face
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Glossy PVC label | A frosted face avoids glare and hides fingerprints, though gloss gives deeper colour saturation on photographic artwork |
| Pad printing direct to the housing | A label carries fine multicolour artwork in one piece, while pad printing survives abrasion on the part itself |
| Paper label with a laminate | Frosted PVC handles heat and moisture on electronics, but paper is cheaper where the label is only a carton marking |
Getting the Best Result
- Send artwork as PDF, AI, PSD or JPEG at 300dpi minimum with fonts converted to outlines
- State the housing material and surface texture so the right adhesive can be chosen
- Ask for removable adhesive if the label must come off during service or refurbishment
- Specify PMS references for brand colours instead of screen values
- Apply to a clean, degreased surface and press evenly from the centre outwards
- Allow 4-5 working days for express delivery or 5-7 working days by air
Other Products in This Group
Sticker Label Frosted 3M Adhesive Cheap Graphic Overlay
Custom Best Vinyl New Sticker Sizes Round Frosted Labels
New Fashion Puffy Sticker Print Custom Free 3D Foam Label
Sticker Sheets PVC Insurance Car Holders Pocket Stickers
Vinyl Print Stickers New Frosted Labels Strong 3M Adhesive FAQ
What is the delivery time?
Generally 4-5 working days via express and 5-7 working days via air, after artwork approval and production.
Can the label be removed later?
Yes, if you specify removable adhesive. The permanent hot melt option is designed not to be pulled off once applied.
Which printing method do you use?
Offset, silkscreen or UV printing. Silkscreen is the usual choice for opaque colour on dark electronics housings.
Do you hold a certification for this product?
The product specification states ISO9001. No other certificate is claimed.
What materials are the frosted stickers made from?
PVC or PET film with a frosted textured face and a lamination finish.
How do I supply artwork?
PDF, AI, PSD or JPEG at 300dpi minimum, fonts outlined, with PMS references noted for brand colours.
What are the payment terms?
PayPal, bank transfer or Western Union, with a 30-50% deposit before production and the balance before shipment.
Quote Vinyl Print Stickers New Frosted Labels Strong 3M Adhesive
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.