Custom Best Vinyl New Sticker Sizes Round Frosted Labels
Frosted surface labels, also called sanded stickers, printed on plastic and PC stock in any custom shape and size, on rolls or in sheets. The frosted texture behaves like fine sandpaper and changes the surface gloss, so an applied label forms a thin frosted layer that prevents glare and makes the surface look more refined. Printing is offset, silkscreen or UV in CMYK or PMS spot colour, laminated and supplied with permanent or removable adhesive that bonds firmly to glass, plastic and paper. Used across consumer electronics and equipment: phones, speakers, cameras, earphones, smart watches, home appliances, computers and projectors, plus safety and warning labels on tools, helmets and vehicles.
What This Product Gives You
- The frosted surface kills glare, so a label stays readable under overhead lighting or a spotlight
- Waterproof and heat resistant construction lets the label stay on equipment that is washed or runs warm
- UV resistance stops warning and identification text fading on a vehicle or outdoor machine
- Permanent or removable adhesive covers both a production part and a temporary protective label
- Custom shapes and sizes mean a round circle label or an irregular panel cut comes from the same process
- Rolls feed an automatic applicator on an assembly line where sheets suit low volume hand application
Where It Is Used and Who Buys It
Application Scenarios
- Front panel and identification labels on consumer electronics
- Home appliance and computer equipment labelling
- Warning labels on vehicles alerting to moving parts
- Small identification labels on tools and helmets
- Round circle branding labels on glass and plastic products
Who It Is For
- Electronics manufacturers labelling finished products
- Appliance and equipment makers applying safety and rating labels
- Industrial safety managers specifying warning labels
- Tool and PPE suppliers marking equipment
- Procurement engineers sourcing durable identification labels
What Goes Wrong Without It
- A glossy label reflects light and becomes unreadable exactly where the operator needs to read it
- Labels that peel off glass or plastic leave equipment unidentified and out of compliance
- Warning text that fades in sunlight stops doing its job on a vehicle or outdoor machine
- A single label size never fits both a helmet and a vehicle panel, so the size has to be tailored
- Water and cleaning fluid destroy paper labels on equipment that gets wiped down regularly
Technical Features
- Frosted sanded surface that changes the gloss and prevents glare
- Plastic and PC stock construction
- Offset, silkscreen and UV printing in CMYK and PMS spot colour
- Lamination surface finishing
- Permanent or removable adhesive bonding firmly to glass, plastic and paper
- Waterproof, heat resistant and UV resistant, die cut to any custom shape
Specification
| Product | Custom shape frosted surface labels |
|---|---|
| Material | Plastic, PC |
| Surface | Frosted sanded texture |
| Colour | CMYK colour, PMS spot colour |
| Printing | Offset, silkscreen printing, UV printing |
| Surface Finishing | Lamination |
| Adhesive | Permanent or removable |
| Format | Printed on rolls or sheets |
| Shape | Round circle or any custom shape |
| Size | Customised, small for tools and helmets through to large panels |
| Properties | Waterproof, heat resistant, UV resistant, anti-glare |
| Delivery via Express | Generally 4-5 working days |
| Delivery via Air | Generally 5-7 working days |
Materials and Manufacturing Process
Materials
- PC film
- Plastic film
Manufacturing Process
- Artwork preflight and label layout
- Offset, silkscreen or UV printing
- Frosted surface treatment and lamination
- Adhesive coating, permanent or removable
- Die cutting to the custom shape
- Rewinding on roll or sheeting and inspection
How This Job Is Checked
- Artwork checked against the label drawing before the print run
- PDF proof approved before production begins
- Printed colour compared by hand against approved PMS references
- Frosted surface consistency and die cut accuracy checked across the batch
- Every order inspected before shipment with photographs sent for approval
What You Can Change
- Any custom shape including round circle, rectangle and irregular outlines
- Size tailored small for tools and helmets or larger for vehicle and equipment panels
- Colour specified in CMYK or matched PMS spot colours
- Permanent or removable adhesive to suit the application
- Supplied on rolls for automatic application or sheets for hand application
- Logos, text and graphics printed with sharp, clear results
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Glossy laminated label | The frosted surface prevents glare and looks more refined on a product face, though gloss gives deeper colour saturation for decorative use |
| Paper equipment label | PC and plastic stock is waterproof and UV resistant where a paper label disintegrates during cleaning |
| Engraved metal plate | A printed frosted label costs far less and carries full colour graphics, while an engraved plate survives abrasion that would wear a film |
Getting the Best Result
- Supply artwork as PDF, AI, PSD or JPEG at 300dpi with fonts converted to outlines
- Mark the die cut outline on a separate layer so the custom shape is unambiguous
- Choose a small label for tools and helmets and a medium or large one for a vehicle warning panel
- Specify permanent adhesive for production labelling and removable where the label comes off later
- Clean and dry the glass or plastic surface before application so the adhesive bonds firmly
- Order on rolls if the labels feed an applicator and state the winding direction
Other Products in This Group
Sticker Label Frosted 3M Adhesive Cheap Graphic Overlay
Vinyl Print Stickers New Frosted Labels Strong 3M Adhesive
New Fashion Puffy Sticker Print Custom Free 3D Foam Label
Sticker Sheets PVC Insurance Car Holders Pocket Stickers
Custom Best Vinyl New Sticker Sizes Round Frosted Labels FAQ
What is a frosted sticker?
Also called a sanded sticker, it has a texture similar to sandpaper that changes the surface gloss. Applied to a surface it forms a thin frosted layer that prevents glare and looks more refined.
What material are the labels?
Plastic and PC stock, waterproof, heat resistant and UV resistant.
What shapes and sizes can you produce?
Any custom shape including round circles, in sizes tailored from small labels for tools and helmets up to larger vehicle and equipment panels.
Permanent or removable adhesive?
Both are available. The adhesive bonds firmly to glass, plastic and paper without peeling.
Are labels supplied on a roll?
Yes, on rolls or in sheets, depending on whether they are applied by machine or by hand.
How long does shipping take?
Generally 4-5 working days via express and 5-7 working days via air.
Do you inspect before shipping?
Yes. Every order is inspected before shipment and photographs of the finished labels are sent for approval.
Quote Custom Best Vinyl New Sticker Sizes Round Frosted Labels
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.