Custom Metal Keychains 2 Sides Enamel Best Choice for Gifts
Double sided enamel keyrings cast or stamped in zinc alloy, aluminium, brass or stainless steel, decorated front and back with your own logo and shape. Normal sizes run from 1cm to 20cm and pieces larger than 20cm are accepted, with the reverse face able to carry a raised logo rather than being left blank. They are bought as trading pins, souvenirs and desk gifts, and shipped in an OPP bag, backing card, air bubble bag or gift box depending on how they will be handed over.
What This Product Gives You
- Both faces are decorated, so a logo on the front and a message on the back fit without crowding either side
- A size range from 1cm to 20cm covers a small trading pin and a large commemorative fob from one process
- Rainbow plating and dyed finishes give a distinct look where standard gold and silver would be unremarkable
- Die casting, stamping, etching and laser engraving are all available, so the method follows the artwork rather than the reverse
- A raised logo can be added to the backside instead of leaving it flat and plain
- Four packing formats let the same keyring go into a bulk carton or straight onto a retail peg
Where It Is Used and Who Buys It
Application Scenarios
- Trading pin exchanges at sports tournaments and scout events
- Souvenir keyrings sold at attractions and destinations
- Desk and bag decoration items sold as brand merchandise
- Client gifts handed out at exhibitions and supplier visits
- Commemorative keyrings marking a company or club anniversary
Who It Is For
- Tournament and event organisers producing trading pins
- Souvenir retailers stocking destination keyrings
- Brand merchandise buyers producing fan accessories
- Corporate gifting teams sourcing client giveaways
- Promotional distributors quoting enamel keyrings to clients
What Goes Wrong Without It
- Single sided keyrings waste half the surface a buyer has already paid to produce
- Standard gold and silver plating makes every trading pin at an exchange look the same
- Blank reverse faces leave no room for a date, a name or a sponsor credit
- Bulk bagged keyrings cannot go straight onto a retail display without repacking
- Suppliers locked to one forming method force the artwork to be simplified to suit their tooling
Technical Features
- Die casting, stamping, etching and laser engraving available per design
- Zinc alloy, aluminium, brass, copper and stainless steel bodies
- Normal size from 1cm to 20cm, larger than 20cm accepted
- 1, 2, 4, 5 or 6 colour printing
- Rainbow plating and dyed special metal colours
- Custom backside type including a raised logo
Specification
| Product Range | Pin, coin, medal, keychain, cufflink, bookmark, belt buckle |
|---|---|
| Material | Metal, zinc alloy, aluminium, brass |
| Craftsmanship | Die casting, stamping, etching, laser engraving |
| Design Type | 2D or 3D |
| Size | Normally 1cm to 20cm, larger than 20cm accepted |
| Shape | Custom shape |
| Print Method | 1, 2, 4, 5 or 6 colour |
| Technique | Gravure, silk screen and offset printing |
| Colour | Customised |
| Special Metal Colour | Rainbow plating, dyed finishes |
| Backside | Any custom type, raised logo can be added |
| Packaging | OPP bag, backing card, air bubble bag or gift box |
| Usage | Trading pin, decoration, souvenir |
Materials and Manufacturing Process
Materials
- Zinc alloy
- Aluminium
- Brass
- Copper
- Stainless steel
- Rubber
Manufacturing Process
- Artwork approval
- Die casting or stamping
- Etching and laser engraving
- Polishing
- Plating
- Enamel filling and printing
- Ring assembly
- Hand inspection
- Packing
How This Job Is Checked
- Both faces of the artwork checked at finished size before tooling is committed
- First piece approved for shape, plating tone and enamel level before the run continues
- Printed and enamel colours compared by hand against the approved reference
- Each keyring checked for burrs, backside relief and ring fitting before packing
- Photographs of the finished goods sent for approval before shipment
What You Can Change
- Any shape and size, normally 1cm to 20cm, with larger pieces accepted
- Forming method chosen between die casting, stamping, etching and laser engraving
- 2D flat or 3D relief design
- Colour applied by 1 to 6 colour printing or enamel
- Rainbow plating or dyed special metal colour instead of a standard finish
- Packing selected from OPP bag, backing card, air bubble bag or gift box
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Single sided printed keyrings | Decorating both faces carries twice the message for one piece, though a single sided keyring is cheaper where the back is never seen |
| Soft PVC keychains | Metal with enamel resists wear and feels more substantial, while soft PVC is more forgiving on complex organic shapes |
| Laser engraved plain metal tags | Enamel adds brand colour that engraving cannot, but engraving is quicker where the design is only text |
Getting the Best Result
- Send separate artwork for the front and the back so neither face is left as an afterthought
- Keep artwork bold at small sizes, since fine strokes close up in casting and enamel
- Ask for rainbow plating early, as it changes the finishing route rather than being added at the end
- Specify a raised backside logo before tooling, since it is formed with the body
- Choose the packing format against how the keyring reaches the end user, retail peg or bulk handout
- Approve a physical sample of the plating tone before the full batch is finished
Custom Metal Keychains 2 Sides Enamel Best Choice for Gifts FAQ
What sizes do you make?
Normally 1cm to 20cm. Pieces larger than 20cm are accepted where the design calls for it.
Can both sides be decorated?
Yes. Any custom backside type is accepted and a raised logo can be added to the reverse face.
Which metals are available?
Metal bodies in zinc alloy, aluminium and brass, with copper and stainless steel also used depending on the finish.
How many print colours can you run?
1, 2, 4, 5 or 6 colour, using gravure, silk screen or offset printing alongside enamel work.
Can you do an unusual plating colour?
Yes, rainbow plating and dyed special metal colours are available as well as standard plating.
How are the keychains packed?
OPP bag, backing card, air bubble bag or gift box. Pick the format that matches how the piece is handed over.
What are the payment terms?
PayPal, bank transfer or Western Union, with 30-50% deposit before production and the 50% balance before shipment.
Quote Custom Metal Keychains 2 Sides Enamel Best Choice for Gifts
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.