Roll Up Banner Printing 200x80cm New Banner Free Shipping
A retractable roll up banner stand built on an aluminium alloy base, supplied in 80x200cm, 85x200cm and 100x200cm with a printed graphic area of 79cm x 202cm. The graphic is digitally printed in gloss or matt and retracts into the wide base cassette for transport, and double sided versions show information on both faces. Bought by exhibitors, retailers and conference organisers who need a portable display that one person can carry and set up unaided.
What This Product Gives You
- The aluminium alloy cassette is light enough to carry by hand yet stiff enough to hold the graphic straight
- A wide base stops the stand tipping in an aisle where people brush past it
- Double sided construction puts information on both faces, which doubles the value of a corridor position
- MOQ of 1 pc makes a single stand for one launch or one branch worth ordering
- Three stock widths at 200cm height cover most exhibition and retail positions without custom tooling
- The graphic can be replaced later, so the base is reused across campaigns
Where It Is Used and Who Buys It
Application Scenarios
- Exhibition booth corners and aisle-facing positions
- Conference registration areas and breakout room signage
- Retail store entrances and promotion end caps
- Showroom and dealership display points
- Recruitment fairs and open day stands
Who It Is For
- Exhibitors and trade show marketing teams
- Retail chains equipping branches with promotion displays
- Conference and event organisers
- Print brokers supplying small business clients
- Corporate communications teams furnishing branch offices
What Goes Wrong Without It
- Narrow-base stands tip over in busy aisles and the graphic is scuffed on the first day
- Single sided displays waste the second face in a corridor where traffic comes both ways
- Gloss surfaces flare under exhibition spotlights and the message cannot be read at an angle
- Artwork sized without bleed or a safe margin loses logos into the cassette or the trim
- Buying a new stand for every campaign is waste when only the graphic changes
Technical Features
- Aluminium alloy retractable frame with wide floor base
- Stand sizes 80x200cm, 85x200cm and 100x200cm
- Printed graphic area of 79cm x 202cm
- Gloss or matt surface finish
- Digital printing on polyester fabric and vinyl substrates
- Double sided versions showing information on both faces
Specification
| Product Name | Retractable roll up banner stand |
|---|---|
| Frame Material | Aluminium alloy |
| Feature | Retractable and portable |
| Stand Sizes | 80x200cm, 85x200cm, 100x200cm |
| Graphic Size | 79cm x 202cm |
| Surface | Gloss or matt |
| Sides | Single or double sided |
| Printing | Digital printing |
| Bleed | 3-5 mm on all sides |
| Safe Area | Keep text and logos at least 20 mm from the edges |
| Artwork Format | AI, JPG, PDF, EPS, PSD |
| Fonts | Converted to outlines or embedded |
| MOQ | 1 pc |
Materials and Manufacturing Process
Materials
- Aluminium alloy
- Polyester fabric
- PVC vinyl
- PP
Manufacturing Process
- Artwork preflight with bleed and safe area check
- Digital printing
- Trimming to 79cm x 202cm
- Rail and end cap fitting
- Assembly into the aluminium base
- Test extension and bag packing
How This Job Is Checked
- Artwork checked for 3-5 mm bleed and 20 mm safe area before the file goes to print
- PDF proof approved in writing before the graphic is printed
- Printed colour matched by hand against the approved proof
- Every stand extended and retracted to confirm the spring and rail run true
- Photographs of the finished stands sent for approval before shipment
What You Can Change
- Stand width chosen between 80cm, 85cm and 100cm at 200cm height
- Surface specified gloss or matt to suit the lighting at the venue
- Single or double sided graphic
- Substrate chosen between polyester fabric and vinyl
- Replacement graphics supplied later for an existing base
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Fabric hanging banner | A roll up stand is free-standing and needs no rigging, while a hung banner covers a much larger area for the price |
| X-banner stand | The retractable cassette protects the graphic in transit, though an X-banner is lighter and cheaper to replace outright |
| Rigid foam board sign | The roll up packs into a bag and reuses its base, while a rigid board cannot be knocked over and costs less per panel |
Getting the Best Result
- Set up artwork at 79cm x 202cm with 3-5 mm bleed on all sides
- Keep important text and logos at least 20 mm in from every edge
- Convert all text to outlines or embed the fonts before sending the file
- Allow dead space at the bottom of the design for the section that sits inside the cassette
- Choose the matt surface where the stand sits directly under spotlights
- Retract the graphic fully before lifting the stand so the leading edge is not creased
Other Products in This Group
Roll Up Banner Printing 200x80cm New Banner Free Shipping FAQ
What sizes do you supply?
80x200cm, 85x200cm and 100x200cm stands. The printed graphic area is 79cm x 202cm.
What is the minimum order?
1 pc. A single stand can be ordered for one event or one branch.
How should I set up the artwork?
At the graphic size with 3-5 mm bleed on all sides, important content at least 20 mm from the edges, and fonts outlined or embedded.
Should I choose gloss or matt?
Matt if the stand sits under spotlights or near a window, because gloss flares and the message becomes unreadable at an angle.
Can the stand show two different designs?
Yes. The double sided version carries separate information on each face, which suits corridor and aisle positions.
Which artwork formats do you accept?
AI, JPG, PDF, EPS and PSD at 300dpi minimum.
Can I reorder just the graphic?
Yes. The aluminium base is reusable, so later campaigns only need a new printed panel.
Quote Roll Up Banner Printing 200x80cm New Banner Free Shipping
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.