3D PVC Poster High Quality Embossed UV Print Medical Using
Wall posters made in eco-friendly PVC at 0.2mm to 0.6mm, with 0.35mm the usual sheet, UV printed and then embossed so images and lettering stand off the surface. The construction is waterproof and was developed for medical colleges explaining human organ structure and for hospital corridors and consultation rooms, where hospitals across Europe have ordered them from us. Panels are produced up to 1200mm and the artwork is customised, so a set of charts for a department is made to one drawing and one colour standard.
What This Product Gives You
- Embossed images and lettering give a wall chart depth that a flat printed poster cannot show at any resolution
- Waterproof PVC survives a hospital corridor that is cleaned regularly, where a paper poster would not
- Thicknesses from 0.2mm to 0.6mm, with 0.35mm as the working sheet, keep the panel flat on a wall without framing
- Panels up to 1200mm let a teaching chart be read from across a lecture room
- UV printing bonds to the PVC directly so there is no surface film to lift at the poster edge
- Payment at 30% deposit with the 70% balance before shipment keeps the buyer's exposure low until goods are ready
Where It Is Used and Who Buys It
Application Scenarios
- Teaching charts in medical colleges explaining human organ structure
- Hospital corridor and waiting area health information posters
- Consultation room wall charts used while explaining a diagnosis
- Promotional gift posters carrying a brand or product message
- Departmental chart sets produced to one specification across a hospital
Who It Is For
- Medical college and university procurement departments
- Hospital purchasing teams fitting out wards and corridors
- Medical education publishers producing wall chart ranges
- Distributors supplying teaching aids into healthcare institutions
- Pharmaceutical marketing teams producing promotional wall material
What Goes Wrong Without It
- A flat printed anatomy poster gives students no sense of the depth of an organ structure
- Paper posters buckle and stain in a corridor that is mopped and wiped daily
- Posters laminated with film peel at the corner where staff and students touch them
- Charts ordered from different suppliers for different departments never match in colour or style
- Paying in full before production leaves a buyer exposed on an overseas order
Technical Features
- 3D embossed images and lettering on the poster surface
- UV printing onto eco-friendly PVC
- Sheet thickness 0.2-0.6mm, typically 0.35mm
- Panel sizes customised up to 1200mm
- Waterproof construction suitable for clinical environments
- Customised logo and artwork on every panel
Specification
| Material | Plastic, eco-friendly PVC |
|---|---|
| Standard Thickness | 0.35mm |
| Thickness Range | 0.2-0.6mm |
| Feature | 3D embossed images or letters |
| Imprint | UV printing |
| Product Type | Medical use wall chart and poster |
| Application | Medical, education and promotional gifts |
| Maximum Panel Size | Up to 1200mm |
| Size | Customised |
| Logo | Can be customised |
| Surface Property | Waterproof |
| Eco-Friendly | Yes |
| Payment | T/T 30% deposit, 70% balance before shipment |
| Artwork Format | PDF, AI, PSD or JPEG at 300dpi minimum with outlined fonts |
Materials and Manufacturing Process
Materials
- Eco-friendly PVC
- Plastic sheet
Manufacturing Process
- Artwork preflight
- Emboss mould making
- UV printing onto PVC sheet
- 3D embossing of images and lettering
- Trimming to panel size
- Hand inspection
- Rolled or flat packing
How This Job Is Checked
- Artwork preflighted for resolution and outlined fonts before the mould is cut
- PDF proof approved in writing before the print run
- Embossed relief checked against the approved proof for depth and registration
- Each poster examined by hand for colour match, print defects and trim accuracy
- Photographs of the finished posters sent for approval before shipment
What You Can Change
- Any artwork, chart content or logo printed to your file
- Panel size customised up to 1200mm
- Thickness selected across the 0.2-0.6mm range
- Embossed areas specified so only the intended elements are raised
- Poster sets produced to one colour standard across a department
- Bundled with matching 3D PVC desktop charts
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Paper wall posters | PVC is waterproof and holds an embossed relief, while paper is far cheaper and easier to replace for a short campaign |
| PVC foam board signage | A thin embossed PVC poster rolls for shipping and hangs without fixings, though rigid foam board is better where the panel must stand alone |
| Flat UV printed PVC posters | Embossing adds depth to anatomical detail, but a flat print is cheaper because no mould has to be cut |
Getting the Best Result
- Supply artwork as PDF, AI or PSD at 300dpi or better with fonts saved as outlines
- Mark the elements to be embossed on their own layer, since the mould is cut from that layer
- Keep panel dimensions within 1200mm or the chart will have to be split across sheets
- Set label text large enough to read from the back of a lecture room before scaling the artwork up
- Clean the surface with a damp cloth, taking advantage of the waterproof face rather than using solvents
- Order the whole department set on one purchase order so the colour standard is set once
Other Products in This Group
3D PVC Desktop Embossed Durable High Density New Materials
3D Custom Printed Cards New Wedding Invitation Thank U Card
Print on PVC Cards 100% Recyclable High Quality Gift Cards
2025 Hot Sale Custom Printing Plastic PVC Business Cards With Logo Printed
3D PVC Poster High Quality Embossed UV Print Medical Using FAQ
What thickness is the PVC poster?
0.2-0.6mm, with 0.35mm the usual working sheet. Thicker stock is available where the poster must be more rigid.
How large can the poster be?
Up to 1200mm. Larger charts are split across panels designed to hang together.
Is the poster waterproof?
Yes. The PVC sheet and the UV printed face are waterproof, which is why it is specified for hospital corridors and consultation rooms.
What is the minimum order?
MOQ varies by product; some items have no MOQ while others start at 500-1000 pcs. Confirm the quantity when requesting a quote.
What are the payment terms?
T/T with a 30% deposit and the 70% balance paid before shipment. PayPal and Western Union are also accepted.
Can you print our own chart artwork?
Yes, the logo and full artwork are customised. Send the file with the embossed elements on a separate layer.
How long does shipping take?
3-4 working days by express or air freight, or 15-18 days by sea for a larger consignment.
Quote 3D PVC Poster High Quality Embossed UV Print Medical Using
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.