Custom Printed Lanyards 80x95cm High Quality Polyerster
Custom printed lanyards are polyester neck straps with a printed logo, supplied with a plastic ID card holder sized 80 x 95 mm for badges and name cards. Logos are applied by thermal transfer, with silk screen printing available for one or two colour designs and sublimation for multi-colour gradients and fine detail. Strap widths run 10mm, 15mm, 20mm and 25mm, with a standard length of 35 to 45 inches or 89 to 114 cm including the attachment. Minimum order is 100 pcs and a free digital proof is issued before production.
What This Product Gives You
- Sublimation printing carries gradients and photographic detail that silk screen cannot reproduce on a narrow strap
- Silk screen is the cheaper route for a one or two colour logo, so simple designs are not overpriced
- Widths from 10mm to 25mm let a lightweight ID badge use a narrow strap and a heavier pass use a wider one
- A lobster claw hook attachment is secure and quick to clip, which matters when badges change hands at an event
- A 100 pcs minimum suits a single conference or a department rollout rather than a full company order
- A free digital proof means the logo placement on the strap is confirmed before any production runs
Where It Is Used and Who Buys It
Application Scenarios
- Conference and exhibition visitor badges
- Staff ID and work permit holders in offices and factories
- Campus card holders for students
- Promotional gift lanyards at product launches
- Event crew and contractor access passes
Who It Is For
- Event organisers issuing delegate badges
- HR and facilities teams rolling out staff ID
- Universities and schools issuing campus cards
- Marketing teams ordering promotional giveaway lanyards
- Exhibition contractors supplying crew passes
What Goes Wrong Without It
- A screen printed logo loses gradient detail, leaving a brand mark that does not match the rest of the event material
- Narrow straps cut into the neck when they carry a heavy badge and card holder
- Weak attachments release and badges are lost during an event
- Suppliers with high minimums make a single conference order uneconomic
- Logo placement errors are only discovered after production when no proof was issued
Technical Features
- Polyester strap with printed logo
- Thermal transfer printing as standard
- Silk screen printing for one or two colour designs
- Sublimation heat transfer for multi-colour and gradient artwork
- Strap widths of 10mm, 15mm, 20mm and 25mm
- Lobster claw hook and other attachment options
Specification
| Product Name | Custom polyester lanyard strap with printed logo |
|---|---|
| Strap Material | Polyester ribbon string |
| Card Holder Material | Plastic |
| Card Holder Size | 80 x 95 mm |
| Card Holder Colour | Transparent |
| Strap Widths | 10mm, 15mm, 20mm, 25mm |
| Standard Length | 35-45 inches, 89-114 cm including attachment |
| Lanyard Printing | Thermal transfer |
| Other Print Methods | Silk screen printing, sublimation heat transfer |
| Attachment | Lobster claw hook |
| Usage | Promotional gift, ID badge holder |
| MOQ | 100 pcs |
| Sample Option | Free digital proof |
Materials and Manufacturing Process
Materials
- Polyester
- Plastic
Manufacturing Process
- Artwork preparation and digital proof
- Thermal transfer or sublimation printing
- Strap cutting to length
- Attachment fitting
- Card holder assembly
- Inspection
- Packing
How This Job Is Checked
- A free digital proof is issued so logo placement and size on the strap are confirmed before production
- Printed colour is compared against the approved proof on sample straps
- Attachment fitting is pull-checked on samples taken from the run
- Strap length and width are measured against the specification before packing
- Photographs of the finished lanyards are sent for approval before shipment
What You Can Change
- Printed logo applied by thermal transfer, silk screen or sublimation
- Strap width chosen at 10mm, 15mm, 20mm or 25mm
- Strap length set within the 89 to 114 cm standard range
- Attachment chosen to suit the badge, including lobster claw hook
- Card holder supplied transparent or in a colour to match the strap
- Breakaway construction where a safety release is required
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Silk screen printed lanyards | Silk screen is cheaper for one or two colours, while sublimation is the only option for gradients and high detail artwork |
| 10mm narrow straps | 10mm is ideal for lightweight ID badges, though 20mm or 25mm carries a heavy pass more comfortably and shows more of the logo |
| Plain unprinted lanyards | Printed straps carry the brand through the whole event, but a plain strap is cheaper where no branding is needed |
Getting the Best Result
- Send logo artwork as vector where possible with fonts converted to outlines
- Choose sublimation for gradient or photographic logos and silk screen for flat one or two colour marks
- Pick 10mm for a light ID badge and 20mm or 25mm where the pass is heavier or the logo is detailed
- Confirm the finished length within the 89 to 114 cm range including the attachment
- Check the free digital proof carefully since logo repeat and placement are set from it
- Order the 80 x 95 mm card holder to match your badge dimensions before printing badges
Other Products in This Group
3D Custom Printed Cards New Wedding Invitation Thank U Card
Print on PVC Cards 100% Recyclable High Quality Gift Cards
2025 Hot Sale Custom Printing Plastic PVC Business Cards With Logo Printed
100% Plastic Membership Cards New Luggage Tag Fast Delivery
Custom Printed Lanyards 80x95cm High Quality Polyerster FAQ
What is the minimum order quantity?
100 pcs. That covers a single conference or a department rollout without a larger commitment.
What widths are available?
10mm, 15mm, 20mm and 25mm. 10mm is ideal for lightweight ID badges and the wider options carry heavier passes.
How long is a standard lanyard?
35 to 45 inches, or 89 to 114 cm, including the attachment.
Which printing method suits my logo?
Silk screen for one or two colour designs, sublimation heat transfer for multi-colour, gradient and high-detail graphics. Thermal transfer is the standard method here.
Do I get a proof before production?
Yes. A digital proof is free and shows a preview of the printed strap before production starts.
What size is the card holder?
The plastic card holder is 80 x 95 mm and is supplied transparent as standard.
What attachments can I have?
Lobster claw hook is the usual option, chosen because it is secure and quick to clip and unclip.
Quote Custom Printed Lanyards 80x95cm High Quality Polyerster
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.