Metallic Stickers High Quality Gold or Silver Foil 3M Glue
Metallic stickers are self-adhesive labels with a gold or silver metallic PET face, printed with brand logos, instructions and product information. The face carries a silver white metallic lustre and is specified as moisture, oil, scratch, heat, stain, tear and corrosion resistant, so it stays intact on goods that are handled and shipped. Adhesive is selectable from a universal general type through a universal strong type to a removable strong type, and the backing liner comes in several grades. BOPP, vinyl, PVC and PP faces are available where a plain film is preferred to a metallic one.
What This Product Gives You
- The metallic PET face gives a real reflective lustre that printed metallic ink cannot match on a shelf
- Scratch and tear resistance means an instruction label survives being pushed in and out of a carton repeatedly
- Heat and corrosion resistance keeps a rating label readable on appliances that run warm
- Three adhesive grades let the same label design be specified as permanent on goods and removable on display units
- A matte varnish over the metallic face takes the edge off the shine where the brand wants restraint rather than glare
- Sample quantities from 50 pcs make it cheap to test adhesion on the actual housing before ordering 1000 pcs
Where It Is Used and Who Buys It
Application Scenarios
- Goods instruction and information labels on packaged products
- Brand logo labels on consumer goods and accessories
- Rating and identification labels on appliances that generate heat
- Retail packaging decoration where a metallic accent is part of the design
- Export packaging labels that must carry market specific information
Who It Is For
- Brand owners specifying a metallic label as part of the pack design
- Consumer goods manufacturers applying instruction labels
- Appliance makers needing a heat tolerant identification label
- Exporters localising label content for EU and US markets
- Packaging buyers comparing metallic stock against printed alternatives
What Goes Wrong Without It
- Printed metallic effects read as grey under store lighting instead of reflecting
- Instruction labels scuff and become unreadable while goods move through distribution
- A single permanent adhesive spec forces display units to be scrapped when the label cannot be removed
- Labels curl or discolour on products that run warm in use
- An over-shiny metallic face can look cheap, and there is no obvious way to soften it without losing the metal
Technical Features
- Bright silver or gold metallic PET self-adhesive face
- Alternative faces in BOPP, vinyl, PVC and PP
- Adhesive options covering universal general, universal strong and removable strong types
- Backing liner choices including white, blue, yellow, thick white and economical yellow base paper
- Matte varnish and spot foil available over the metallic face
- Waterproof, grease-proof and fade resistant construction
Specification
| Usage | Custom sticker for goods instruction |
|---|---|
| Type | Adhesive stickers |
| Feature | Waterproof, grease-proof, fade resistant |
| Material | Metallic PET, BOPP, vinyl, PVC, PP |
| Surface Properties | Moisture, oil, scratch, heat, stain, tear and corrosion resistant |
| Finish | Silver white metallic lustre, bright or matte varnished |
| Adhesive Types | Universal general, universal strong, removable strong |
| Base Paper | White, blue, yellow, thick white or economical yellow |
| Decoration | Spot foil over metallic face |
| Custom Order | Accepted |
| Sample Quantity | From 50 pcs |
| Typical Order Quantities | 500 pcs and 1000 pcs |
Materials and Manufacturing Process
Materials
- Metallic PET
- BOPP
- Vinyl
- PVC
- PP
Manufacturing Process
- Artwork preflight
- Printing on metallic face
- Foil stamping
- Matte varnishing
- Die cutting
- Manual inspection
- Packing
How This Job Is Checked
- Artwork is preflighted for design discrepancies before imposition
- A PDF proof is approved in writing before the run is committed
- Metallic tone and printed colour are compared against the approved proof
- Adhesion is tested on the customer's stated substrate before bulk release
- Photographs of the finished goods are sent for approval before shipment
What You Can Change
- Gold or silver metallic face selected per design
- Adhesive grade chosen from general, strong or removable strong
- Matte varnish with spot foil where a softer metallic look is wanted
- Face swapped to BOPP, vinyl, PVC or PP where metal is not required
- Any die cut shape and size from your drawing
- Backing liner grade selected to suit hand or machine application
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Metallic ink printed on paper | A metallic PET face reflects properly and resists moisture, while metallic ink on paper is cheaper for a short indoor run |
| Full gloss metallic sticker | A matte varnish with spot foil gives a considered look without the over-shine, though full gloss has more impact at distance |
| Plain white vinyl label | Vinyl prints lighter colours more faithfully, but it carries none of the metallic reflection the brand is paying for |
Getting the Best Result
- Send artwork as PDF, AI, PSD or JPEG at 300dpi minimum with fonts converted to outlines
- Tell us the substrate the label will be applied to so the right adhesive grade is chosen
- Ask for removable strong adhesive where display units must be stripped and reused
- Specify a matte varnish with spot foil when you want metal only on the logo
- Order a 50 pcs sample run to check adhesion and lustre before a 500 or 1000 pcs order
- Keep white or very light artwork off the bare metallic face unless an opaque underlay is printed
Other Products in This Group
Serial Number 0.05mm Vinyl Sticker Sheets Free Sample labels
2025 Sheet Sticker Printing Metallic Silver Cheap Labels
New Fashion Puffy Sticker Print Custom Free 3D Foam Label
Sticker Sheets PVC Insurance Car Holders Pocket Stickers
Metallic Stickers High Quality Gold or Silver Foil 3M Glue FAQ
What quantities can I order?
Sample runs start at 50 pcs, with 500 pcs and 1000 pcs the usual production quantities.
Which adhesive should I choose?
Universal general for ordinary packaging, universal strong for goods in service, and removable strong where the label must come off cleanly later.
Will the sticker survive heat and oil?
The metallic PET face is specified as heat, oil, moisture, stain and corrosion resistant, which is why it is used on goods instruction labels.
Can I have gold instead of silver?
Yes. Gold and silver foil faces are both available, and foil can also be applied selectively over a matte varnished surface.
What materials do you offer besides metallic PET?
BOPP, vinyl, PVC and PP faces are available where a plain film suits the application better.
What artwork format do you need?
PDF, AI, PSD or JPEG at 300dpi minimum with fonts outlined and the die line on its own layer.
How do I pay?
PayPal, bank transfer or Western Union, with a 30-50% deposit before production and the balance before shipment.
Quote Metallic Stickers High Quality Gold or Silver Foil 3M Glue
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.