Customized Stickers Envelope Sealing Wax Label Custom Stamping
Sealing wax labels made from resin, paraffin and pigment, a mixture that melts under gentle heat so a logo can be pressed into the surface, then supplied as a self-adhesive sticker rather than a loose wax blob. Standard size is 1.5 Inch round with custom shapes and diameters from 20mm through 25mm, 30mm, 35mm and 50mm, in PVC, paper or wax and finished waterproof. Minimum order is 500pcs and sample production is recommended before mass production to check the stamped logo. Used on wedding envelopes, gift wrapping, bottle mouths and boutique packaging where a pressed wax seal carries more weight than a printed label.
What This Product Gives You
- The wax seal arrives ready-made with an adhesive back, so there is no melting, dripping or curing on the packing bench
- A pressed logo has real depth that a printed imitation wax sticker cannot match
- Waterproof construction means the seal survives the postal system rather than softening in transit
- Sizes from 20mm to 50mm cover a small envelope flap through to a wide gift box closure
- PVC, paper and wax material options let you balance cost against the authenticity of the finish
- Sample production before the bulk run confirms the stamped logo reads correctly at the chosen diameter
Where It Is Used and Who Buys It
Application Scenarios
- Wedding invitation, RSVP and thank-you card envelope seals
- Gift wrapping paper and present closures
- Bottle mouth sealing with a branded logo
- Boutique and handmade product packaging
- Etsy and small business order packaging closures
Who It Is For
- Event stationers and wedding planners
- Etsy sellers and handmade product makers
- Boutique brands packaging direct-to-consumer orders
- Gift and stationery retailers
- Packaging designers specifying a premium closure
What Goes Wrong Without It
- Melting real sealing wax by hand is slow and unrepeatable across hundreds of invitations
- Loose wax seals crack and fall off during postal sorting where an adhesive backed seal stays put
- A printed flat circle pretending to be wax is obvious close up and undercuts a premium invitation
- A logo that works on a business card can close up when pressed at 20mm, which sampling catches early
- Small brands cannot justify a bespoke brass stamp and the labour to use it on every order
Technical Features
- Sealing wax formulation of resin, paraffin and pigment that melts under gentle heat
- Custom logo pressed into the wax surface
- Self-adhesive backing for direct application
- Material options of PVC, paper and wax
- Waterproof finish
- Round 1.5 Inch standard with custom shapes and diameters from 20mm to 50mm
Specification
| Usage | Paper packaging, envelope, gift |
|---|---|
| Type | Adhesive sticker |
| Material | PVC, paper, wax |
| Standard Size | 1.5 Inch |
| Other Diameters | 20mm, 25mm, 30mm, 35mm, 50mm |
| Shape | Round or custom |
| Thickness | 0.3mm to 1.5mm |
| Decoration | Custom logo stamping |
| Feature | Waterproof |
| Adhesive | 3M adhesive backing |
| MOQ | 500pcs |
| Express Delivery | DHL, UPS or FedEx, 3-7 days |
Materials and Manufacturing Process
Materials
- Sealing wax of resin, paraffin and pigment
- PVC
- Paper
Manufacturing Process
- Logo artwork preparation and stamp die making
- Wax mixing and casting
- Logo stamping into the heated wax surface
- Adhesive backing application
- Trimming to the round or custom outline
- Sample approval and packing
How This Job Is Checked
- Logo artwork checked and a stamp die proof approved before casting
- Sample production run and approved before mass production to avoid risks
- Stamped logo depth and definition compared against the approved sample
- Diameter, thickness and adhesive coverage inspected across the batch
- Photographs of the finished seals sent for approval before shipment
What You Can Change
- Customer logo stamped into the wax face
- Diameter chosen from 20mm through 50mm or the 1.5 Inch standard
- Round or fully custom outline
- Material specified as PVC, paper or wax
- Pigment colour matched to the invitation or packaging scheme
- Self-adhesive backing for envelopes, gift wrap or bottle mouths
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Traditional melted sealing wax and a brass stamp | The sticker version applies in a second and is identical every time, though melting real wax gives a slightly irregular hand-made edge some brands want |
| Printed foil sticker imitating wax | A real wax seal has physical depth that a printed circle cannot reproduce, while the printed version is cheaper and thinner in the post |
| Embossed paper seal | Wax carries more weight on a wedding invitation, but an embossed paper seal is flatter and cheaper to post in bulk |
Getting the Best Result
- Supply the logo as vector artwork with fonts converted to outlines so the stamp die is cut cleanly
- Keep the design bold; fine detail closes up when pressed into wax at 20mm or 25mm
- Order sample production before mass production, which we strongly recommend to avoid risks
- Choose 1.5 Inch for invitation flaps and a smaller 20mm to 25mm seal for bottle necks
- Apply to a clean dry envelope or box and press firmly around the whole edge
- Hand cancel or use a rigid mailer for posted invitations so the seal is not crushed by sorting machinery
Other Products in This Group
New Fashion Puffy Sticker Print Custom Free 3D Foam Label
Sticker Sheets PVC Insurance Car Holders Pocket Stickers
Custom Stickers in Bulk Printing Cheap Price Even only 1pc
Custom Logo to Sticker Printing Free Sample MOQ is only 1pc
Customized Stickers Envelope Sealing Wax Label Custom Stamping FAQ
What is the minimum order quantity?
500pcs. Sample production is strongly recommended before mass production to check the stamped logo.
What size are the seals?
1.5 Inch is standard, with other diameters at 20mm, 25mm, 30mm, 35mm and 50mm, round or custom shape.
What are the seals made of?
Sealing wax is a substance made of resin, paraffin and pigment. PVC and paper versions are also available.
Do I have to melt them?
No. They are supplied as adhesive stickers with the logo already pressed into the wax, so they apply straight onto an envelope, gift or bottle.
Are they waterproof?
Yes, the seals are specified as waterproof, which is what keeps them intact in the post.
How fast can they be shipped?
Express by DHL, UPS or FedEx takes 3-7 days and is the best option for samples and urgent orders.
Can you match a colour?
Yes. The pigment in the wax is customised along with the size and shape to match your invitation or packaging scheme.
Quote Customized Stickers Envelope Sealing Wax Label Custom Stamping
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.