Custom Plastic Shopping Bags Luxury Laser Holographic Tote Bags 3D Mockup
A transparent or laser holographic shopping tote welded from PVC, PE, TPU, EVA or HDPE film, typically between 0.3mm and 0.6mm thick. The laser film shifts colour as the bag moves, which is what makes it work as a fashion accessory rather than a plain carrier, and the whole body is waterproof and weather-resistant. Sizes run small at 20-30cm and medium at 30-50cm, with 30 x 25 x 8 cm a common reference build. It is bought by cosmetics brands, fashion accessory sellers and beach and resort retailers who need a reusable bag with a visible logo.
What This Product Gives You
- Laser holographic film shifts colour in movement, which no printed ink on a plain bag can imitate
- Waterproof and weather-resistant construction suits beach, poolside and rainy-day retail use without any coating
- Five film options across PVC, PE, TPU, EVA and HDPE let clarity, softness and cost be traded per project
- Film from 0.3mm to 0.6mm sets how structured the bag stands, from a soft cosmetic pouch to a shoulder tote that keeps its shape
- A reusable fashion bag stays in circulation, so the printed logo is seen well beyond the point of sale
- Printed bags at 10-15 working days after proof approval fit inside a normal seasonal buying cycle
Where It Is Used and Who Buys It
Application Scenarios
- Beach and resort shopping and swim bags
- Cosmetics and toiletry travel totes
- Fashion accessory retail and shoulder bags
- Promotional bags at brand activations and launches
- Garment retail carrier bags for reuse
- Festival and event merchandise bags
Who It Is For
- Cosmetics brands packing gift-with-purchase totes
- Fashion accessory wholesalers adding a holographic line
- Beach and resort retailers buying seasonal stock
- Promotional product distributors sourcing reusable branded bags
- Marketing managers running a launch with a wearable giveaway
What Goes Wrong Without It
- Fabric bags stain and soak at the beach or poolside, where welded film wipes clean
- A plain clear bag has no shelf appeal, which the holographic laser film supplies without extra print
- Film picked too thin sags under a load and creases permanently, so 0.3mm to 0.6mm is chosen against use
- Printed logos on soft film distort as the bag flexes, which is why flat solid artwork is specified
- Long lead times miss a season, which a 10-15 working day printed bag window is sized against
Technical Features
- Film construction in PVC, PE, TPU, EVA or HDPE
- Laser holographic and transparent film finishes
- Film thickness across 0.3mm, 0.4mm, 0.5mm and 0.6mm
- Waterproof and weather-resistant welded seams
- Custom logo printing on the bag face
- Handle and shoulder strap configurations for tote or shoulder carry
Specification
| Material | PVC, PE, TPU, EVA, HDPE |
|---|---|
| Film Thickness | 0.3mm to 0.6mm |
| Finish | Transparent or laser holographic |
| Size Small | 20-30cm |
| Size Medium | 30-50cm |
| Example Size | 30 x 25 x 8 cm |
| Colour | Customised |
| Logo | Accept customised logo |
| Feature | Reusable, waterproof and weather-resistant |
| Usage | Cosmetics, garments, beach bags |
| Sample Time | 3-5 working days for blank or printed sample |
| Production Time | 12-15 working days after sample approval |
| Printed Bags Lead Time | 10-15 working days after proof approval |
| Express Shipping | DHL, UPS or FedEx in 5-7 days |
Materials and Manufacturing Process
Materials
- PVC film
- PE film
- TPU film
- EVA film
- HDPE film
- Holographic laser film
Manufacturing Process
- Artwork preflight and proof approval
- Film cutting
- Logo printing on film
- High frequency welding
- Handle and strap attachment
- Seam and finish inspection
- Individual bagging and cartoning
How This Job Is Checked
- Film gauge checked against the ordered thickness before cutting begins
- Printed logo checked against the approved proof for position and colour on the first bags produced
- Welded seams inspected along their full length for continuous bonding and no burn-through
- Finished bags checked for film clarity, holographic pattern alignment and handle attachment
- Photographs of the finished bags sent for approval before shipment
What You Can Change
- Film selected from PVC, PE, TPU, EVA or HDPE against clarity and softness requirements
- Thickness set between 0.3mm and 0.6mm depending on how structured the bag must be
- Transparent or laser holographic finish
- Any size to your drawing, with 20-30cm small and 30-50cm medium as reference bands
- Custom printed logo in your placement on one or both faces
- Tote handles or a shoulder strap fitted to the top edge
Compared With the Alternatives
| Alternative | How This Compares |
|---|---|
| Clear PVC tote without holographic film | Laser film gives shelf appeal with no extra printing, though plain clear film is cheaper and shows the contents more honestly |
| Coated paper shopping bag | The film bag is waterproof and reused for a season, while a paper bag takes foil and embossing and recycles as one material |
| TPU version of the same bag | TPU stays clear longer and resists yellowing, but PVC welds more predictably and lands at a lower unit cost |
Getting the Best Result
- Give width, gusset and height in centimetres; 30 x 25 x 8 cm is a useful starting reference for a medium tote
- Choose 0.3mm for a soft folding pouch and 0.5mm to 0.6mm where the bag must stand on its own
- Keep printed artwork to flat solid shapes, since fine detail distorts as the film flexes
- Specify holographic film early, as the pattern direction affects how the panels are cut
- Allow 3-5 working days for a sample and 12-15 working days production after sample approval
- Ship and store the bags flat so the film does not take a set crease before it reaches the shelf
Other Products in This Group
Custom Paper Bags 300gsm Black Luxury Gold Foil with Ribbon
Personalized Canvas Tote Bags A4 Factory Price Luxury Woven Bags
Printed Gift Bags Luxury Gold Hot Stamping 100% Recycled Packaging Boutique Bags
Custom Reusable Bags 100% Pure Cotton Cheap Shopping Bag With Handle
Custom Plastic Shopping Bags Luxury Laser Holographic Tote Bags 3D Mockup FAQ
What film thickness should I order?
0.3mm to 0.6mm. The thinner end folds soft for cosmetic pouches; 0.5mm to 0.6mm holds a structured tote shape when the bag is empty.
How long does production take?
A blank or printed sample takes 3-5 working days, production runs 12-15 working days after sample approval, and printed bags are 10-15 working days after proof approval.
What sizes are standard?
Small is 20-30cm and medium is 30-50cm, with 30 x 25 x 8 cm a common build. Any size can be made to your drawing.
Which material should I pick?
PVC is the usual choice for laser holographic bags. PE, TPU, EVA and HDPE are available where a different clarity, softness or cost point is needed.
Is the bag waterproof?
Yes, the welded film body is waterproof and weather-resistant, which is why it is used for beach and poolside bags.
How fast can you ship?
Express by DHL, UPS or FedEx takes 5-7 days. Sea freight runs 15-18 days for larger volumes.
What artwork do you need for the logo?
PDF, AI, PSD or JPEG at 300dpi with fonts outlined. Flat solid shapes reproduce best on film, so avoid gradients and hairline detail.
Quote Custom Plastic Shopping Bags Luxury Laser Holographic Tote Bags 3D Mockup
Send the quantity, size and finish. Digital samples run in 1-2 working days and custom sample cost is refunded once the bulk order is confirmed.