Two Post Lift
ATL40B Two Side Manual Lock Base Floor Two Post Lift
4T base floor two post lift with bilateral manual lock
26 products
Car Lift
Vehicle lifts from 0.8 to 8 tonnes, covering two post, scissor, four post, single post and EV battery removal. Choose by the vehicles you take in and the floor you have to work with.
The Full Car Lift Range
Every model published in this category, with the specification and application on each page.
Two Post Lift
ATL40C Two Side Manual Clear Floor Two Post Lift
4T clear floor lift with bilateral manual lock
Two Post Lift
ATL40CS Single Manual Lock Clear Floor Two Post Lift
4T clear floor lift with single side release
Scissor Lift
ASL40T 4T In-ground Ultra-thin Big Scissor Lift
In-ground ultra-thin 4T lift with secondary lift
Scissor Lift
ASL50T 5T Ultra-thin Scissor Lift
Six cylinder 5T ultra-thin lift with one button levelling
Scissor Lift
ASL27M 2.7T Middle Rise Scissor Lift
Trench-free mid-rise lift with 110 mm start height
Four Post Lift
AFL40/40S Four Post Lift for Wheel Alignment
4T four post lift with adjustable runway spacing
Four Post Lift
AFL50 5T Four Post Lift for Wheel Alignment
5T four post lift with secondary lifting system
Sub Categories
Narrow the range down by the mechanism you need.
Two Post Lift
Two post lifts in base floor and clear floor form, with manual or electric lock release, from 4 to 8 tonnes.
Scissor Lift
Scissor lifts from 0.8 to 8 tonnes, in-ground, ultra-thin, mid-rise and motorcycle versions, several with a secondary lift for wheel alignment.
Four Post Lift
Four post lifts for wheel alignment and for parking, with adjustable runway spacing and wire rope anti-fracture locks.
Battery Removal Lift
Battery tables for electric and new energy vehicles, with adjustable platform angle and mobile pulleys.
Single Post Lift
A mobile single post lift that can be wheeled clear when the bay is needed for something else.
Who This Equipment Is For
- Independent repair workshops
- Van and light commercial specialists
- Workshops in buildings with limited headroom
- Distributors supplying general workshop lifts
- Independent workshops with one technician per bay
- Workshops with limited headroom
Problems It Solves
- An overhead beam limits the height of vehicles a bay can take
- Thin columns flex and shorten lift life under repeated loading
- Locks that only engage high up leave a gap early in the lift
- Single-side release forces the technician to walk around the vehicle
- Bilateral release means walking around the vehicle on every lower
- Overhead beams restrict the vehicles a bay can accept
Application Scenarios
Where These Machines Earn Their Bay Space
- Workshops with low ceilings or roof obstructions
- Vans and high-roof vehicles that would foul an overhead beam
- General repair work needing full underbody access
- Bays where the floor plate can be accommodated
- Single-technician bays where walking around the vehicle costs time
- High-roof vans that would foul an overhead beam
- General repair with full underbody access
- High-volume workshops where lift cycles repeat all day
- Bays with several technicians sharing one lift
- Workshops standardising the raising and lowering procedure
Industries Buying This Equipment
Equipment Distributors and Importers
Distributors building a garage equipment range for their own market, who need a consistent line, clear packing data and parts support.
Bay Solutions Using These Machines
Wheel Alignment Bay
An aligner, a lift that can hold the vehicle wheels-free, and the floor work to put them together.
General Repair Bay
One lift that suits the building you have, plus the oil handling equipment that keeps the floor safe.
EV and New Energy Service Bay
Getting a battery pack out from under the car safely, and servicing the air conditioning system that goes with it.
Related Guides
What to Check Before a Workshop Lift Is Delivered
Most installation problems are decided weeks before the crate arrives. These are the checks that stop a lift turning up for a bay that cannot take it.
Frequently Asked Questions
How many car lift models do you offer?
There are 26 models published in this category. All of them are listed on this page with their specifications.
Can you quote a matched set rather than one machine?
Yes. Tell us which bay you are fitting out and we will quote the machines together, which usually reduces the freight cost per unit.
What do you need from me to give an accurate price?
Model or application, quantity, your local voltage and frequency, and the destination port.
Do you supply spare parts for these machines?
Yes. Send the model number and we will quote the parts you need. Distributor orders include a recommended spares list.
How are these machines packed for export?
Crated for container loading. Crate dimensions, gross weight and units per 20 ft and 40 ft container are confirmed on the quotation.
Get Car Lift Pricing and Packing Data
Send the model, the quantity, your local voltage and the destination port and we will come back with a landed price.