Two Post Lift
ATL40B Two Side Manual Lock Base Floor Two Post Lift
4T base floor two post lift with bilateral manual lock
Two Post Lift · Model ASL50AS
ASL50AS 5T Asymmetric Two Post Lift
5T asymmetric two post lift for door clearance
Product Overview
ASL50AS is a 5000 kg asymmetric two post lift. The columns are rotated and the arms are of unequal length, which sets the vehicle further back between the posts so the doors can be opened while it is in the air. It is built on the same platform as the rest of the range, with 24V electronic control and Bosch Rexroth hydraulic valve parts.
Key Benefits
What This Machine Changes in the Bay
- 5000 kg / 11,000 lbs capacity covers vans and larger SUVs
- Asymmetric arm layout gives door clearance with the vehicle raised
- 24V safety electronic control keeps operator voltage low
- Shot blasted frame with outdoor-grade electrostatic powder coating
- German Bosch Rexroth hydraulic valve parts with Italian seals and ball valves
Application Scenarios
- Interior and electrical work with the vehicle raised
- Diagnostic work needing access to the driver's seat mid-job
- Workshops lifting a mix of cars, vans and larger SUVs
- Bays where the technician moves in and out of the cabin repeatedly
Who It Is For
- General repair and diagnostic workshops
- Auto electrical and interior trim specialists
- Service centres handling a heavy vehicle mix
- Distributors supplying 5T two post lifts
Problems It Solves
What It Stops Costing You
- Symmetric lifts trap the doors against the columns
- Lowering the vehicle to get into the cabin wastes time on diagnostic jobs
- 4T lifts cap the vehicle mix a workshop can accept
- Poorly finished frames corrode in wet workshops
Technical Features
- Capacity 5000 kg / 11,000 lbs
- Asymmetric two post lift layout
- 24V safety electronic control
- Electronic control box with front and rear door
- Shot blasting finish with outdoor-grade automatic electrostatic powder coating
- Robotic fabrication for dimensional accuracy
- German Bosch Rexroth hydraulic valve parts with Italian oil sealing rings and ball valves
Specifications
A dimension and specification table for this model is available on request. Send us the model number and we will email the current data sheet.
Compared With Other Models
- Against a symmetric two post lift: the vehicle sits further back, so doors open clear of the columns
- Against the ATL40 family: 5000 kg rather than 4000 kg capacity
- Against a four post lift: full wheels-free access for suspension and brake work
Use Guide
- Confirm slab thickness and anchor requirements before installation
- Set the short arms at the front and the long arms at the rear under the designated lifting points
- Raise fully and lower onto the safety locks before working underneath
- Check door clearance at working height before opening the doors
Quality and Support
What Comes With the Machine
Quality Assurance
Every product is supplied with a long warranty assurance.
Expert Guidance
Pre-sales and after-sales teams give professional guidance and aftersales support.
Reliability
Consistent and reliable performance across every product line.
Innovation
An experienced R&D team develops the products the market asks for.
Customization. Machines are built to your local voltage and frequency, and optional equipment is listed on the quotation. Send us your requirement and we will confirm what can be changed before you order.
ASL50AS Questions Buyers Ask
What is the capacity?
5000 kg, equivalent to 11,000 lbs.
What does asymmetric mean on a two post lift?
The columns and arms are arranged so the vehicle sits further back between the posts, which lets the doors open while it is raised.
What control voltage is used?
24V safety electronic control, with the control box fitted with front and rear service doors.
What hydraulic components are fitted?
German Bosch Rexroth hydraulic valve parts with Italian imported oil sealing rings and ball valves.
Can you confirm the arm dimensions and lifting height?
Send us your enquiry and we will supply the current dimension drawing for this model before you order.
What floor preparation is required?
A sound concrete slab of adequate thickness. The anchor pattern and slab specification are supplied with the installation drawing.
Related Products
Two Post Lift
ATL40C Two Side Manual Clear Floor Two Post Lift
4T clear floor lift with bilateral manual lock
Related Guides
Two Post or Scissor Lift for a General Repair Bay
The choice is usually decided by the building rather than the vehicles. Here is how ceiling height, slab condition and the work you take in point to one or the other.
Clear Floor or Base Floor Two Post Lift
Both carry the same 4 tonnes. The difference is where the connection between the columns runs, and that decides which building each one suits.
Download the Catalogue
Car Lift Catalog 2024 V1.1
Two post, scissor, four post, single post and battery removal lifts with model-by-model specifications.
Download PDF (6552 KB)Request a Quotation for the ASL50AS
Tell us the quantity, your local voltage and the destination port and we will send a price with crate dimensions and lead time.