Wheel Alignment Bay
An aligner, a lift that can hold the vehicle wheels-free, and the floor work to put them together.
Wheel Aligner · Model WA900S
3D Wheel Aligner with Automatic Tracking System
Self-tracking 3D aligner for high-volume bays
Product Overview
WA900S is a 3D four-wheel aligner whose camera beam follows the targets by itself, so the operator never stops to reset the beam height as the lift moves. Five-megapixel industrial cameras and a short 8 to 12 cm run-out routine keep each alignment short, and the machine works with any type of car lift including two post lifts.
Key Benefits
What This Machine Changes in the Bay
- The beam traces the targets automatically, removing the step that slows a manual aligner down
- Run-out compensation needs only 8 to 12 cm of rolling movement
- Works with all kinds of car lift, including two post lifts, so an existing bay can be used
- 5-megapixel industrial cameras hold the reading as the lift rises
- Indicator lights show the operator the adjustment direction without walking back to the screen
Application Scenarios
- High-volume alignment bays running back-to-back bookings
- Two post lift bays where the vehicle height changes during the job
- Tyre chains standardising alignment procedure across branches
- Workshops offering alignment as part of a fixed-price service package
Who It Is For
- Busy independent workshops and fast-fit chains
- Tyre retailers with a dedicated alignment technician
- Dealership workshops needing a repeatable documented result
- Distributors supplying full alignment bay packages
Problems It Solves
What It Stops Costing You
- Manually resetting the camera beam every time the lift moves wastes minutes on every job
- Aligners that need a dedicated flat platform block the use of an existing two post bay
- Long run-out procedures make technicians skip steps and lose accuracy
- Operators walking between the wheels and the screen stretch the job time
Technical Features
- Beam traces targets automatically
- 5-megapixel industrial cameras
- Vehicle database with 50,000+ entries
- Short rolling run-out compensation of 8 to 12 cm
- Works with all kinds of car lift including two post lifts
- Indicator light system for operator guidance
Specifications
A dimension and specification table for this model is available on request. Send us the model number and we will email the current data sheet.
Compared With Other Models
- Against the WA500: the beam tracks the targets automatically instead of being set by hand, which shortens every job
- Against CCD systems: no cables strung between the wheels, and nothing to recalibrate after a knock
- Against a fixed-platform aligner: it works with an existing two post lift rather than demanding a dedicated bay
Use Guide
- Clamp the targets to all four wheels and select the vehicle from the database
- Raise the lift; the beam tracks the targets without further input
- Roll the vehicle 8 to 12 cm for run-out compensation
- Adjust while watching the indicator lights, then print the before and after report
Quality and Support
What Comes With the Machine
Quality Assurance
Every product is supplied with a long warranty assurance.
Expert Guidance
Pre-sales and after-sales teams give professional guidance and aftersales support.
Reliability
Consistent and reliable performance across every product line.
Innovation
An experienced R&D team develops the products the market asks for.
Customization. Machines are built to your local voltage and frequency, and optional equipment is listed on the quotation. Send us your requirement and we will confirm what can be changed before you order.
Bay Solutions Using This Machine
WA900S Questions Buyers Ask
Can it be used with a two post lift?
Yes. The WA900S works with all kinds of car lift including two post lifts, which is the main reason workshops choose it over a platform-bound aligner.
How much rolling movement does the run-out routine need?
Between 8 and 12 cm, which is shorter than the WA500 routine.
What does the automatic tracking actually do?
The camera beam follows the wheel targets as the lift changes height, so the operator does not stop to reposition the beam.
What camera resolution is used?
Five-megapixel industrial cameras.
Do you supply the wheel clamps and targets?
Yes, targets and clamps are part of the standard shipment. Confirm the rim range you work with and we will list the correct clamps on the quotation.
What lead time should we plan for?
Lead time depends on the configuration and the quantity ordered. Send us your requirement on WhatsApp or by email and we will confirm a date in writing.
Related Products
Download the Catalogue
Tyre Maintenance Catalog 2024 V1.1
Tyre changers, wheel balancers and wheel aligners across the ATC, AWB and WA ranges.
Download PDF (5415 KB)Request a Quotation for the WA900S
Tell us the quantity, your local voltage and the destination port and we will send a price with crate dimensions and lead time.