Tilting Column
ATC880S Fully Automatic Tire Changer Without Turntable & Crowbar
Leverless tyre changing up to 24 inches
Bay Solutions
Tyre Service Bay
A changer and a balancer matched to the wheels you actually handle, so rim damage and lifting injuries stop being routine.
How the Bay Gets Specified
- Profile the wheelsRim diameter, aspect ratio and wheel weight decide whether you need an assistant arm, a tyre lifter or a leverless machine.
- Choose the column typeTilting column machines give more access on wide wheels; swing column machines fit a narrower bay.
- Match the balancerBalance to the same wheel size range as the changer - the AWB950S and AWB950 cover tyres to 26 inches.
- Check the air supplyThe shovel, the assistant arm and the lifting system all run on shop air; confirm compressor output before ordering.
- Plan consumablesMounting head inserts and pneumatic seals are the usual wear parts; we include a spares list with distributor orders.
Equipment in This Solution
Every machine below is in the published range, with its own specification page.
Tilting Column
ATC831S Tire Changer with Tire Lifter
Tilting column changer with lifter and assistant arm
From Enquiry to Handover
What We Handle at Each Stage
Survey
Bay dimensions, ceiling height, slab condition and vehicle mix.
Specify
Machines matched to the constraints, with the trade-offs stated.
Drawings
Anchor pattern, slab specification and pit drawing before civil work.
Build
Built to your local voltage and frequency, then crated for container loading.
Commission
Technical support through installation, calibration and first use.
Related Guides
How to Choose a Tyre Changer for Your Wheel Mix
Assistant arm, tyre lifter, leverless. Each answers a different problem, and the right answer comes from the wheels you actually handle rather than the machine specification sheet.
Choosing a Wheel Balancer LED or LCD and What Else Matters
Display type is the visible difference, but automatic rim measurement, shaft diameter and weight placement modes do more for the bay's throughput.
Frequently Asked Questions
Can you quote the whole bay in one go?
Yes, and it is usually cheaper. Machines shipped together share the container space, which lowers the freight cost per unit.
What information do you need to specify the bay?
Bay dimensions, ceiling height, slab condition, whether the floor can be cut, your vehicle mix and your local voltage.
Do you supply the drawings before the civil work starts?
Yes. For in-ground equipment we send the foundation drawing before the pit is cut, so the pocket is right the first time.
Who installs the equipment?
Installation is carried out locally by a competent installer. We supply the drawings, the manual and technical support during commissioning.
Can we phase the purchase?
Yes. Several machines are supplied with upgrade paths, such as reserved mounting holes for an assistant arm on the ATC830 and ATC850.
Specify a Tyre Service Bay
Send the bay dimensions, the ceiling height and what you take in. We will come back with the equipment list, the price and the drawings.