Technical knowledge
Written for the person who has to choose the fastener, not sell it. Each guide covers one specification decision, why it matters and how to get it right the first time.
Fine vs Coarse Thread Drywall Screws: How to Specify Correctly
The single most common drywall fastener error, why it happens, and the two-question test that prevents it.
Why Drywall Screws Have Bugle Heads
A curved head profile that compresses paper instead of cutting it — and what happens when the radius is wrong.
Self-Drilling Screws: Matching Drill Point to Steel Thickness
Point geometry, flute length and the timing problem that decides whether a Tek screw fastens or jacks the sheets apart.
How an EPDM Bonded Washer Seals a Roof Penetration
Bonded versus loose washers, the compression window, and why over-driving is the most common roof leak on site.
Choosing a Fastener Finish: Zinc, Phosphate, Magni and Ruspert
Five coating families, what each actually protects against, and the mismatches that cause most field corrosion.
DIN 7504, 7505 and 7981: A Practical Standards Guide
What each standard actually fixes, where ISO and ASTM overlap, and why 'DIN equivalent' is not the same as DIN.
Screw Head and Drive Reference for Specifiers
Nine head forms and six drive types, what each is actually for, and how to pick without guessing.
SAE 1018, 1022 and 10B21: Fastener Steel Grades Explained
Three carbon steels, why boron matters, and what heat treatment actually does to a screw.
Cold Heading and Thread Rolling: Why Screws Aren't Cut
Grain flow, work hardening, and the reason a formed thread outlasts a machined one.
Fastener Packaging and FCL Loading for Importers
Pack formats, mixed-SKU containers, and the documentation that should travel with the order.
Still not sure which screw you need?
Describe the substrate, the thickness, the exposure and the volume. We will specify it for you — no obligation.