Bulletproof Vest
Polyester or nylon carrier with front and back pockets for armor plates
Specifications
Steel Sheet
Hot Rolled and Cold Rolled Steel Sheet
Flat rolled sheet across the 0.1-400mm range on one published width and length list
Steel sheet is flat rolled material supplied in either cold rolled or hot rolled condition across a thickness range of 0.1-400mm. It is bought by fabrication shops, structural steelwork contractors and sheet metal manufacturers who work from a fixed width and length list rather than from coil. Holding widths of 1000mm 1219mm 1500mm 1800mm 2000mm 2500mm 3000mm and 3500mm against lengths of 2000mm 2400mm 3000mm 5800mm and 6000mm lets a nesting plan be drawn to a sheet size that is actually available, which is usually where drop and offcut cost is decided. A minimum of 1 ton keeps smaller production runs and trial batches inside the same supply route as repeat orders.
- Product Name — Steel Sheet
- Technique — Cold rolled or hot rolled
- Thickness — 0.1-400mm
- Width — 1000mm 1219mm 1500mm 1800mm 2000mm 2500mm 3000mm 3500mm
- Length — 2000mm 2400mm 3000mm 5800mm 6000mm
Why It Is Specified
Key Benefits of Steel Sheet
Thickness Range From Foil Gauge To Heavy Plate
The same supply line covers the whole 0.1-400mm range. A shop running thin pressings and heavy structural parts does not need two separate sources.
Eight Stock Widths To Nest Against
Widths of 1000mm 1219mm 1500mm 1800mm 2000mm 2500mm 3000mm and 3500mm are listed, so the nesting plan can be drawn to a real sheet size rather than cut down from an oversize blank.
Five Standard Lengths Including 5800mm and 6000mm
Lengths of 2000mm 2400mm 3000mm 5800mm and 6000mm cover both short press blanks and long structural panels. The 5800mm length suits container loading.
Cold Rolled Or Hot Rolled From One Order
Technique is chosen per line item, so a surface critical panel in cold rolled sheet and a structural part in hot rolled sheet can be bought together.
Minimum Of 1 Ton Or A Free Sample
The minimum order quantity is 1 ton, and a free sample can be released before that, so a new part can be trialled before a production quantity is committed.
Third Party Documentation Available
ISO9001 BV SGS and RoHS documentation is available and a mill test certificate ships with the material for the purchasing record.
Problems It Solves
What This Material Removes From Your Process
Nesting Plans Drawn To Unavailable Sheet Sizes
A drawing nested to a size nobody stocks turns into an oversize blank and paid for drop. Publishing the eight widths and five lengths lets the nest be set to a size that ships.
Thin And Thick Work Split Across Suppliers
Thin gauge and heavy sections are often bought separately because no single source covers both ends. A 0.1-400mm range keeps both on one order and one document set.
Trial Parts Blocked By Order Size
New parts stall when the first batch has to be a full production quantity. The minimum order quantity is 1 ton, and a free sample can be released before committing.
Seams Added Because The Sheet Is Too Narrow
Narrow sheet forces a longitudinal joint into a panel that should be one piece. Widths up to 3500mm remove the seam from many panel and shell designs.
Cold Rolled Finish Ordered When Hot Rolled Would Do
Paying for a cold rolled surface on a part that will be painted or hidden adds cost. Choosing the technique per line item keeps the finish matched to the part.
Application Scenarios
Where It Is Used
Sheet Metal Pressing and Forming Shops
Thin cold rolled sheet at the lower end of the 0.1-400mm range blanked and pressed into enclosures panels and brackets.
Structural Steelwork Fabrication
Hot rolled sheet cut into gussets base plates stiffeners and built up sections for building and plant frames.
Machinery and Equipment Housings
Guards covers and machine bodies cut from 1500mm or 2000mm wide sheet where the panel spans the full machine width.
Tank Silo and Vessel Shells
Longer 5800mm and 6000mm sheets rolled into shell courses so the number of vertical seams is reduced.
Vehicle and Trailer Body Panels
Body sides floors and headboards cut from wide sheet where a single panel avoids a joint across the load area.
Heavy Wear and Base Components
Thick sections at the top of the 0.1-400mm range used as base plates mounting blocks and machined components.
Who It Is For
Buyers Who Specify This Product
- Sheet metal fabricators buying cold rolled sheet for pressed and folded parts
- Structural steel shops buying hot rolled sheet for gussets base plates and stiffeners
- Machinery builders buying wide sheet for guards covers and equipment housings
- Tank and vessel manufacturers buying 5800mm or 6000mm lengths for shell courses
- Trailer and vehicle body builders buying full width panels to avoid seams
- Distributors and stockists holding a standard width and length range for local shops
Technical Data
Specifications and Technical Features
Values below come from the product data published by Shandong Tianyu Metal Products. Confirm the exact grade and size against your order.
| Product Name | Steel Sheet |
|---|---|
| Technique | Cold rolled or hot rolled |
| Thickness | 0.1-400mm |
| Width | 1000mm 1219mm 1500mm 1800mm 2000mm 2500mm 3000mm 3500mm |
| Length | 2000mm 2400mm 3000mm 5800mm 6000mm |
| Minimum Order Quantity | 1 ton or free sample |
| Delivery | After receipt of the deposit or according to your order quantity |
| Certification | ISO9001 BV SGS |
| Price Term | TT or LC |
| Place of Origin | China |
| Sample | Free sample available |
Technical Features
- Technique cold rolled or hot rolled per line item
- Thickness 0.1-400mm
- Widths 1000mm 1219mm 1500mm 1800mm 2000mm 2500mm 3000mm and 3500mm
- Lengths 2000mm 2400mm 3000mm 5800mm and 6000mm
- Minimum order quantity 1 ton with free sample available
- Certification ISO9001 BV and SGS
- Price term TT or LC
- Delivery after receipt of the deposit or according to your order quantity
Materials
- Cold rolled steel sheet for surface critical and formed parts
- Hot rolled steel sheet for structural and heavy section parts
- Thin gauge material at the low end of the 0.1-400mm thickness range
- Heavy flat material at the top end of the 0.1-400mm thickness range
Certification
- ISO9001
- BV
- SGS
- RoHS
- Mill test certificate supplied with each shipment
Manufacturing
How It Is Made and Processed
Rolling to the ordered thickness in the cold rolled or hot rolled route
Levelling and flattening of the rolled material
Cutting to the ordered width from the eight stock widths
Cutting to the ordered length from the five stock lengths
Edge trimming and deburring of the cut sheets
Thickness and dimensional inspection before packing
Stacking edge protection and strapping for export loading
Quality Control
Checks Before It Ships
- Thickness measured against the ordered figure inside the 0.1-400mm range
- Width and length checked against the ordered size before packing
- Flatness and edge condition inspected after cutting
- Surface checked for the ordered cold rolled or hot rolled condition
- Bundle weight and piece count reconciled against the packing list
- Mill test certificate issued with the shipment
Customization
What We Can Change on Your Order
- Thickness set anywhere inside the 0.1-400mm range
- Width taken from the stock list or cut to your own figure
- Length taken from the stock list or cut to a nesting size
- Technique nominated as cold rolled or hot rolled per line item
- Order quantity built from a 1 ton minimum upward
- Packing and bundle size arranged for the handling equipment at destination
Comparison
Steel Sheet Against the Alternatives
| Steel supplied in coil | Sheet arrives already cut to a fixed width and length, so no decoiling and levelling line is needed before the first part is cut. |
|---|---|
| Narrow width sheet | Widths up to 3500mm let a wide panel or shell course be made in one piece rather than joined from two narrower sheets. |
| Cold rolled sheet for every part | Hot rolled sheet is available on the same order for parts that will be painted welded or hidden, which keeps the cold rolled surface where it is actually needed. |
| Buying from a local service center | Thickness across the full 0.1-400mm range comes from one supply route instead of being split between a thin gauge stockist and a plate stockist. |
Use Guide
Specifying Handling and Welding Notes
- Draw the nest to one of the listed widths and lengths before fixing the drawing so drop is planned rather than discovered
- Choose 5800mm length where the sheet has to load into a standard shipping container
- Specify cold rolled only where the surface will be visible or closely formed and use hot rolled elsewhere
- Allow for edge trimming when calculating usable width on a tight nest
- Store sheets flat on bearers and keep thin gauge stacks covered so moisture does not mark the surface
- Ask for the mill test certificate with the order so thickness and condition are documented for the job file
Questions Buyers Ask
Steel Sheet FAQ
What thickness can you supply in steel sheet?
The range is 0.1-400mm. Thin gauge and heavy flat material come from the same supply route so both can sit on one order.
Which widths and lengths do you hold?
Widths of 1000mm 1219mm 1500mm 1800mm 2000mm 2500mm 3000mm and 3500mm against lengths of 2000mm 2400mm 3000mm 5800mm and 6000mm.
What is the minimum order quantity?
1 ton. A free sample can be released before that if you want to check the material against a trial part first.
Can I get a size that is not on the standard list?
Yes. Width and length can be cut to your figure, and thickness can be set anywhere in the 0.1-400mm range.
Should I order cold rolled or hot rolled?
Cold rolled suits surface critical and closely formed parts. Hot rolled suits structural parts that will be welded or painted. Both can be ordered together.
How is the sheet packed for export?
Sheets are stacked with edge protection and strapped into bundles. Bundle size can be set to suit the lifting equipment at your end.
What certificates come with the sheet?
ISO9001 BV SGS and RoHS documentation is available and a mill test certificate ships with the material.
Same Range
Related Products
Bulletproof Plate
Rigid ballistic insert supplied in steel ceramic or UHMWPE at 0-25mm thickness
Specifications
Body Armor Plate
Torso plates in 10 by 12 6 by 8 and 11 by 14 inch sizes for standard carriers
SpecificationsGo Deeper
Industries and Guides Related to This Product
Construction and Infrastructure
Construction and infrastructure buyers order steel by the part it becomes: mild steel plate for base plates gussets and stiffeners
Read more
Automotive and Transport
Vehicle and trailer components fail on fatigue, not on a single overload, so the grade behind each part matters more than the pric
Read more
Construction Machinery and Agriculture
One loader or one tractor needs four different steels and most fabrication shops buy them from four different suppliers. The struc
Read moreNeed a Price on Steel Sheet
Send the grade, thickness, width and quantity you need together with your destination port. A cutting list or drawing gets you a firmer number.