Stainless Steel Coil
Corrosion resistant coil and strip for food kitchen chemical and architectural work
Specifications
Stainless Steel Coil and Strip
Corrosion resistant coil and strip in 201 304 and 310 with the mill surface finish fixed before cutting or decoiling
Stainless steel coil sits inside the steel coil range for work where a painted or galvanized carbon surface will not last. It is supplied as stainless steel coil or strip in grades 201 304 and 310 with thickness from 0 to 100mm and sheet sizes of 1000x2000mm and 1220x2440mm or a customized size. The surface is chosen at order stage from NO.1 2B BA embossed HL and 8K which decides whether the finished part is a drawn pan a brushed appliance panel or a mill finish tank wall. Bending welding decoiling cutting and punching are available before shipment so a fabricator can receive blanks rather than full coils to decoil and store.
Full Range
All 1 Products in Stainless Steel Coil
Corrosion resistant coil and strip in 201 304 and 310 with the mill surface finish fixed before cutting or decoiling
Problems Solved
What This Range Is For
Surface Finish Decided Too Late
NO.1 2B BA embossed HL and 8K are mill finishes and cannot be swapped once the coil is rolled. Naming the finish on the order avoids polishing work that should never have been necessary.
Coated Carbon Steel Failing in Wash Down Duty
Equipment cleaned every shift corrodes through a coating from the cut edges inward. Stainless coil in 201 304 or 310 takes the coating out of the problem entirely.
Grade Over Specified for the Duty
201 304 and 310 differ in cost and in what they tolerate. Matching the grade to the part keeps the spend on the components that actually need it.
Full Coils Bought for Small Blank Runs
Cutting to 1000x2000mm 1220x2440mm or a customized size before shipment removes the decoiling flattening and storage step at your end.
Polished Coil Arriving Marked
BA and 8K finishes show every scuff. Agree the surface protection and the packing before loading so the finish you paid for reaches the press.
Who Buys It
Buyers Who Order From This Range
- Cookware and kitchen equipment manufacturers buying 2B and BA coil for drawn parts
- Cutlery and surgical instrument makers working in narrow stainless strip
- Appliance panel producers specifying HL and embossed finishes
- Vehicle component and fittings fabricators using stainless sheet and strip
- Architectural metalwork shops buying 8K and HL sheet for cladding and balustrades
- Service centers and stockists decoiling stainless for local fabrication workshops
Core Advantages
Why Source This Range From Tianyu Metal
Six Mill Surface Finishes
NO.1 2B BA embossed HL and 8K are available so the coil arrives with the appearance the finished part needs instead of a finish created later by hand.
Three Grades in One Range
201 304 and 310 are quoted together so a job that mixes decorative trim with harder service parts stays on one purchase order and one certificate set.
Thickness From Strip to Plate
Thickness runs from 0 to 100mm which covers thin strip for pressed components and heavy stainless plate for tank and structural work.
Standard Sheet Sizes or Customized
1000x2000mm and 1220x2440mm are the standard cut sizes and any other size is cut to order before the shipment is packed.
Processing Before Shipment
Bending welding decoiling cutting and punching are offered so blanks and formed parts arrive ready for assembly.
Sample and Certificate Available
Samples are available for finish approval and a mill test certificate is issued for the grade supplied.
Application Scenarios
Where This Range Ends Up
Cookware and Kitchen Equipment
Pans sinks and food contact surfaces in 2B or BA finish which is one of the stated applications for this coil.
Cutlery and Surgical Instruments
Strip for cutlery and surgical instruments where surface condition and cleanability decide both the grade and the finish.
Major Appliance Panels
Washing machine and refrigerator panels in HL or embossed finish that hide fingerprints and resist scuffing on the shop floor.
Vehicle Components
Trim fittings and exhaust area parts on vehicles which is listed among the applications for stainless coil.
Construction Cladding and Fittings
Construction material uses such as cladding panels balustrade fittings and trim in 8K or HL finish.
Hot Service Equipment Parts
Components in 310 where the operating temperature is beyond what a 201 or 304 part is intended to sit at.
Buying Guide
What To State When You Order
State the grade as 201 304 or 310 and say whether a substitution can be offered before we quote
Name the surface finish from NO.1 2B BA embossed HL or 8K because it is set at the mill and not afterwards
Give thickness inside the 0 to 100mm range together with the coil or sheet width you need
Say whether you want 1000x2000mm 1220x2440mm or a customized size cut before shipment
List the processing you want from bending welding decoiling cutting and punching
Ask for the mill test certificate and request a sample if the finish has to be approved before the production order
Related
Industries and Solutions Around Stainless Steel Coil
Food and Beverage Packaging
Can makers do not buy steel, they buy a strip that will draw without splitting, take a printed lacquer without blistering and seam
Read more
Automotive and Transport
Vehicle and trailer components fail on fatigue, not on a single overload, so the grade behind each part matters more than the pric
Read more
Construction and Infrastructure
Construction and infrastructure buyers order steel by the part it becomes: mild steel plate for base plates gussets and stiffeners
Read more
Cut to Size and Processing
Buying full plates to make small panels means paying freight on offcuts and storing them afterwards. Tianyu Metal processes steel
Read more
Inspection and Mill Test Certificates
Material without paperwork cannot be released into a job, however good the steel is. A quality department that receives plate with
Read more
Grade Selection and Substitution
A purchasing engineer rarely gets a free choice of grade. The drawing names one designation, the material that is actually availab
Read moreQuestions Buyers Ask
Stainless Steel Coil FAQ
Which stainless grades do you stock in coil?
201 304 and 310 are the grades listed for this coil. Tell us the duty and the finish and we will confirm what is available in your thickness and width.
What surface finishes can I order?
NO.1 2B BA embossed HL and 8K. The finish is produced at the mill so it has to be named on the order rather than changed after the coil is rolled.
What thickness and sheet size are available?
Thickness runs from 0 to 100mm. Standard cut sizes are 1000x2000mm and 1220x2440mm and any other size is customized to your drawing.
Can you cut and punch stainless before it ships?
Yes. Processing covers bending welding decoiling cutting and punching so you can receive blanks or formed parts instead of full coils.
Can we see a sample before placing a production order?
Samples are available. Send the grade thickness and finish you want to assess and we will confirm what can be released for evaluation.
What certificate comes with the coil?
A mill test certificate is issued for the grade supplied. Ask for the mill test certificate with the order so the paperwork travels with the shipment.
Get a Quotation on Stainless Steel Coil
Tell us state the grade as 201 304 or 310 and say whether a substitution can be offered before we quote and we will come back with price, availability and what the mill test certificate will show for stainless steel coil.