Cold Rolled Steel Coil
Cold rolled mild steel coil in SPCC SPCD SPCE and DC01 to DC04 up to 1500mm wide
Specifications
Carbon Steel Coil and Cold Rolled Mild Steel Coil
Uncoated mild steel coil for fabricators who roll form slit or press their own parts instead of buying finished sections
Carbon steel coil is the uncoated side of the steel coil range and covers plain mild steel coil together with cold rolled steel coil. It is made from low carbon mild steel and is used to add strength and support to buildings and other structures, which is why it turns up in road repairs as platforms, as structural members in buildings and bridges and in general fabrication work. The two items in this part of the range differ by the rolling route rather than by the application, so a buyer picks hot condition coil where the surface is going to be welded or coated and cold rolled coil where the surface finish and thickness control matter for pressing. Coil is supplied in customized size so the width is set to your line rather than to a standard mill width that has to be slit again on arrival.
Full Range
All 2 Products in Carbon Steel Coil
Uncoated mild steel coil for fabricators who roll form slit or press their own parts instead of buying finished sections
Carbon Steel Coil
Mild steel coil for structural members bridge work and general fabrication
SpecificationsProblems Solved
What This Range Is For
Buying Cut Sheets for Work That Runs Continuously
A roll forming or decoiling line that is fed with cut sheets stops at every sheet. Coil keeps the line running and moves the cutting decision to your own equipment.
Standard Mill Widths That Need decoiling Again
Coil bought at a fixed mill width has to be slit before it reaches the press and the offcut is paid for twice. Customized size means the width is set for your part before the coil leaves the works.
Surface Finish Wrong for the Pressing Operation
Parts that are drawn or pressed need a tighter surface than a structural member does. Cold rolled coil is held alongside plain carbon coil so the finish follows the operation rather than the other way round.
Coated Coil Bought Where Coating Is Not Needed
A part that is painted or welded after forming gains nothing from a zinc layer that is then burned off. Uncoated mild steel coil takes that cost out of a structural or fabrication order.
Coil and Plate Arriving on Separate Shipments
Structural work usually needs both. Coil from this range loads with plate and pipe from the same works so one shipment covers the build.
Who Buys It
Buyers Who Order From This Range
- Roll forming shops making purlins studs channels and light structural sections
- decoiling and cut to length service centers feeding regional fabricators
- Press shops stamping brackets panels and enclosure parts from cold rolled coil
- Road and civil contractors buying plate material for platforms and temporary decking
- Bridge and building fabricators making structural members from coil stock
- Tube and pipe makers using strip as feedstock for welded sections
Core Advantages
Why Source This Range From Tianyu Metal
Coil Width Cut to Your Line
Size is customized so the coil arrives at the width your roll former or slitter is set for instead of a width you have to reduce first.
Two Rolling Routes in One Category
Plain carbon steel coil and cold rolled steel coil come from the same source so the choice between weldable structural stock and a tighter pressing surface does not change supplier.
Mild Steel That Welds and Forms Without Special Procedure
Low carbon mild steel is the reason this coil is used for platforms structural members and general fabrication as it takes ordinary shop welding and forming.
Processing Available Before Shipment
Cutting decoiling and other processing can be done at the works so you can receive strip or blanks rather than a full coil when your yard cannot handle one.
Documented Material for Structural Work
A mill test certificate is issued against the ordered material so coil going into a bridge or a building carries its paperwork.
Shipped With the Rest of the Order
Coil plate and pipe come from one steel producing processing and sales enterprise in Shandong so a mixed export order loads together.
Application Scenarios
Where This Range Ends Up
Road Repair Platforms and Temporary Decking
Coil cut down into plate material used as working platforms during road repair and civil works.
Structural Members in Buildings
Coil formed into light structural sections and members that add strength and support to a building frame.
Bridge Fabrication Components
Plate and formed members for bridge work where mild steel is welded into the structure on site or in the shop.
General Fabrication and Job Shop Work
Everyday brackets frames and weldments where plain mild steel is the sensible material and coil is the cheapest form to buy it in.
Pressed and Drawn Panel Parts
Enclosure panels covers and brackets pressed from cold rolled coil where the surface is visible or painted afterwards.
Strip Feedstock for Welded Tube
Slit strip feeding a tube mill or a section line that makes its own profiles from coil.
Buying Guide
What To State When You Order
State thickness first then the coil width you need since size is customized rather than fixed to a mill standard
Say whether you want plain carbon coil or cold rolled coil because the surface and the thickness control differ
Give the inside diameter of the coil eye and the maximum coil weight your uncoiler can take
Say what happens to the material after delivery whether it is welded pressed roll formed or slit so the right route is quoted
Confirm whether you want full coils slit strip or cut lengths and send the cutting list if it is the last two
Ask for the mill test certificate and state the packing you need for sea freight
Related
Industries and Solutions Around Carbon Steel Coil
Construction and Infrastructure
Construction and infrastructure buyers order steel by the part it becomes: mild steel plate for base plates gussets and stiffeners
Read moreAutomotive and Transport
Vehicle and trailer components fail on fatigue, not on a single overload, so the grade behind each part matters more than the pric
Read more
Construction Machinery and Agriculture
One loader or one tractor needs four different steels and most fabrication shops buy them from four different suppliers. The struc
Read more
Cut to Size and Processing
Buying full plates to make small panels means paying freight on offcuts and storing them afterwards. Tianyu Metal processes steel
Read moreStock and Lead Time Management
Most late steel is not late because of the mill. It is late because nobody told the buyer, at enquiry stage, which items were sitt
Read moreQuestions Buyers Ask
Carbon Steel Coil FAQ
What is carbon steel coil made from?
It is made from low carbon mild steel which is why it is also called mild steel coil. That composition is what makes it weldable and formable in an ordinary fabrication shop.
Where is mild steel coil normally used?
It is used to provide additional strength and support to buildings and other structures and is commonly used in road repairs as platforms as structural members in buildings and bridges and in general fabrication works.
What sizes can you supply?
Size is customized. Give the thickness and the width your line runs and the coil will be set to that rather than to a standard mill width.
What is the difference between the two coils in this range?
Carbon steel coil is the plain mild steel product for structural and fabrication use. Cold rolled steel coil has been reduced cold so it carries a tighter surface and is the usual choice where the part is pressed or painted.
Can you slit or cut the coil before it ships?
Yes. Cutting and decoiling can be done before loading so you can take slit strip or cut lengths if your workshop has no uncoiler.
Do you supply the material certificate with coil orders?
Yes. Ask for the mill test certificate on the order and it is issued against the material supplied and travels with the shipment.
Get a Quotation on Carbon Steel Coil
Tell us state thickness first then the coil width you need since size is customized rather than fixed to a mill standard and we will come back with price, availability and what the mill test certificate will show for carbon steel coil.