Wire Rope Clips
Stainless Steel Cable Clamps DIN 741
Stainless steel cable clamps to DIN 741 standard, designed for securing ends of stainless steel wire ropes in marine, outdoor, and corrosive environments. The malleable cast body with steel U-bolt and zinc-plated finish resists rust and wear. Available from 3mm to 50mm wire rope diameter, with sizes matched to M4 to M20 bolts. Installed with two nuts to grip the rope tightly and prevent slippage under load.
- Size
- from 3mm to 50mm Processing: Malleable Cast Body, Steel U Bolt
- Material
- Stainless Steel 304/316
- Finish
- Zinc Plated Package: Cartons then pack on pallets
- Catalogue Family
- Wire Rope Clips
- Certificates
- EN 10204 3.1 material test certificate on request
CAD files are supplied on request via WhatsApp or email rather than published for open download.
Key Benefits
What Stainless Steel Cable Clamps DIN 741 Gives You
- Stainless steel construction resists corrosion in saltwater, moisture, and harsh outdoor conditions
- DIN 741 standard ensures compatibility with international rigging systems and load requirements
- Malleable cast body with steel U-bolt provides strength and impact resistance
- Zinc-plated finish enhances surface protection and extends service life
- Secure grip with two nuts and saddle plate prevents rope slippage under dynamic loads
- Available in sizes from 3mm to 50mm wire rope diameter to match common rigging needs
- Compact design reduces bulk while maintaining full load capacity
Application Scenarios
Where Stainless Steel Cable Clamps DIN 741 Is Used
- Marine mooring and anchoring systems where constant exposure to saltwater demands corrosion resistance
- Outdoor rigging in ports and offshore platforms with high humidity and salt spray
- Architectural cable supports for bridges, canopies, and façades exposed to weather
- Industrial lifting and tensioning where stainless steel rope is used and contamination must be avoided
- Temporary rigging setups in mining and construction sites with abrasive or wet conditions
- Cable railings and safety lines on decks and walkways where aesthetics and durability matter
Who It Is For
Buyers This Product Is Built For
- Marine equipment suppliers specifying hardware for mooring and anchoring systems
- Architectural fabricators installing stainless steel cable supports in exposed structures
- Offshore and port operators maintaining rigging in corrosive environments
- Industrial contractors using stainless steel wire rope in chemical or wet processing areas
- Rigging distributors stocking corrosion-resistant cable clamps for outdoor use
- Fleet and trailer operators needing durable cable fasteners for tie-downs and recovery
Problems It Solves
Problems This Product Removes
- Rust and degradation of carbon steel clamps in saltwater and humid environments
- Loose or slipping wire rope connections due to inadequate clamping force
- Need for frequent replacement of fasteners in harsh outdoor or marine applications
- Inconsistent fit between clamps and wire rope due to mismatched sizing or non-standard design
- Lack of traceability and material proof in fasteners used in safety-critical rigging
- Buying clamps from multiple suppliers for different sizes and finishes
Technical Features
Technical Features
- Made to DIN 741 standard for wire rope clamps with U-bolt and saddle plate
- Malleable cast body with steel U-bolt for strength and impact resistance
- Zinc-plated finish on all components to resist corrosion
- Two nuts used to secure the U-bolt and saddle plate around the wire rope
- Sizes from 3mm to 50mm wire rope diameter, matched to M4 to M20 bolt sizes
- Working load limit stamped on the body for traceability and field use
- Standard 4:1 design factor applied unless otherwise stated
Specifications
Stainless Steel Cable Clamps DIN 741 Specifications
Values published in the Kailipu catalogue for this item. Anything not listed is available on request.
| Standard | DIN 741 |
|---|---|
| Material | Stainless steel 304/316 body, steel U-bolt |
| Finish | Zinc plated |
| Capacity Range | 3mm to 50mm wire rope diameter |
| Bolt Size | M4 to M20 |
| Design Factor | 4:1 minimum breaking load to safe working load |
| 3mm Dimensions | A 21 B 10 C 10 D 9 E 12 F 16.6 G 1.4 mm weight 1.4 kg per 100 pcs |
| 5mm Dimensions | A 23 B 10 C 11 D 11 E 13 F 19.65 G 1.5 mm weight 1.5 kg per 100 pcs |
| 10mm Dimensions | A 34 B 17 C 18 D 19 E 22 F 35 G 6.8 mm weight 6.8 kg per 100 pcs |
| 22mm Dimensions | A 61 B 34 C 33 D 37 E 44 F 72.5 G 40 mm weight 40 kg per 100 pcs |
| 30mm Dimensions | A 74 B 43 C 37 D 48 E 50 F 95.6 G 66 mm weight 66 kg per 100 pcs |
| 40mm Dimensions | A 88 B 55 C 45 D 58 E 60 F 125.6 G 104 mm weight 104 kg per 100 pcs |
| 40/50mm Dimensions | A 105 B 63 C 52 D 69 E 98 F 176 G 200 mm weight 200 kg per 100 pcs |
Full size table on request. The catalogue publishes a full dimension and capacity table for this item. Ask on WhatsApp or by email and we will send it as a PDF.
Materials
Materials And Finishes
- Stainless steel 304/316 for the cast body to resist corrosion
- Steel U-bolt for high tensile strength and durability
- Zinc-plated surface on all parts to enhance corrosion resistance
- Two nuts made from carbon steel with zinc plating for secure fastening
Manufacturing Process
How This Product Is Made
1Malleable casting of the body using stainless steel 304/316
2Machining of the U-bolt and saddle plate holes
3Assembly of U-bolt and saddle plate with nuts
4Zinc plating of all components for corrosion protection
5Proof load testing on production batches
6Dimensional tolerance check against DIN 741 specifications
7Stamping of working load limit and traceability marks on the body
Quality Control
Quality Control On Every Batch
- Proof load test on production batches before release
- Dimensional tolerance check against DIN 741 size table
- Breaking strength validation to confirm 4:1 design factor
- Visual inspection for plating defects, cracks, or casting flaws
- Material Test Certificate to EN 10204 3.1 issued with the order on request
- Third-party inspection accepted at the China warehouse before shipment
Customisation
Customisation Options
- Custom tonnage stamping on the body for traceability
- Private label and OEM marking available
- Custom surface finish including zinc plating, powder coating, or electrophoretic black
- Custom sizes and assembly built to a supplied drawing
- Custom carton and pallet packing configuration for warehouse or retail use
Compare
How It Compares With The Alternatives
An honest read on where this pattern wins and where another one would serve you better.
| Alternative | Honest Trade Off |
|---|---|
| Carbon steel cable clamps | Stainless steel resists corrosion in marine and outdoor use but is more expensive and slightly lower in tensile strength |
| Galvanized steel clamps | Stainless steel lasts longer in saltwater and high-moisture areas, but galvanized offers lower cost for less severe environments |
| Plastic or nylon cable clamps | Stainless steel handles high loads and extreme temperatures; plastic clamps are lighter but fail under heavy or dynamic loads |
| Non-DIN standard clamps | DIN 741 ensures consistent dimensions and load ratings, reducing risk of mismatched or unsafe installations |
Use Guide
How To Use And Inspect Stainless Steel Cable Clamps DIN 741
- Match the clamp size to the wire rope diameter as per DIN 741 standards
- Install the saddle plate on the live end of the rope, not the dead end
- Tighten both nuts evenly to avoid misalignment and uneven pressure
- Use the correct number of clamps: minimum three for wire rope diameters up to 30mm
- Check the clamps after initial load and re-tighten if needed
- Inspect for signs of wear, corrosion, or deformation before each use
Related Products
Often Ordered With This Item
Steel Cable Fasteners Wire Rope Clamp &Thimble & Sleeve Set- Customizable Packaging
Wire Rope Clamp And Thimble Set Customizable Packaging
Fist Grip Clamp G-429 US Type Drop Forged Wire Rope Termination
Wire Rope Fastener | Cable Clamps | Wire rope Clips
Steel Rope Clamp A Type Yellow Zinc Galvanzied
Rope Wire Clips A Type Yellow Zinc Galvanzied
1 8 Cable Clamp US Type Malleable Wire Rope Clip
3 8 Cable Clamp US Type Malleable Wire Rope Clip
Browse The Category
Industries Using This Product
Sourcing Support For This Product
Guides Worth Reading Before You Order
Answers
Stainless Steel Cable Clamps DIN 741 FAQ
What standard do these clamps follow?
They are made to DIN 741, which defines dimensions, load ratings, and installation requirements for wire rope clamps.
Are these clamps suitable for saltwater use?
Yes. The stainless steel body and zinc-plated finish resist corrosion, making them suitable for marine and outdoor environments.
What is the minimum number of clamps needed?
A minimum of three clamps is required for wire rope diameters up to 30mm, as per DIN 741 installation guidelines.
Can you provide Material Test Certificates?
Yes. A Material Test Certificate to EN 10204 3.1 is supplied with each order on request.
Can you customise the finish or marking?
Yes. Custom tonnage stamping, private label, OEM marking, and surface finishes including zinc plating, powder coating, or electrophoretic black are available.
How are they packed for export?
Clamps are packed in cartons, then palletised. We can configure carton count and pallet pattern to suit your warehouse or retail pack.
What sizes are available?
Sizes range from 3mm to 50mm wire rope diameter, with corresponding bolt sizes from M4 to M20. The full size table is in the specs section.
Need A Quote On Stainless Steel Cable Clamps DIN 741
Send the sizes, the finish and the quantity on WhatsApp or by email. You get a priced reply within 24 hours and a straight answer on stock.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.