Wire Rope Clips
Steel Rope Clamp A Type Yellow Zinc Galvanzied
A Type A steel rope clamp made from malleable iron with a steel U-bolt and zinc-plated finish, designed to secure wire rope ends in rigging, construction, marine, and industrial applications. The clamp uses a saddle and two nuts to grip the rope, with dimensions from 6mm to 50mm. It is suitable for loop formation, rope termination, and connection in high-load environments.
- Size
- from 6 to 50mm Processing: Malleable Cast Body, Steel U Bolt
- Material
- Malleable Iron
- Finish
- Zinc Plated Package: Cartons then pack on pallets
- Catalogue Family
- Wire Rope Clips
- Certificates
- EN 10204 3.1 material test certificate on request
CAD files are supplied on request via WhatsApp or email rather than published for open download.
Key Benefits
What Steel Rope Clamp a Type Yellow Zinc Galvanzied Gives You
- Simple and reliable design for field or shop installation without special tools
- Zinc-plated finish resists corrosion in outdoor and marine environments
- Malleable iron body provides good impact resistance and ductility
- Steel U-bolt delivers high tensile strength for secure clamping
- Standardized dimensions from 6mm to 50mm cover a wide range of wire rope sizes
- Saddle design ensures even load distribution across the wire rope
- Cost-effective solution for temporary or permanent wire rope termination
Application Scenarios
Where Steel Rope Clamp a Type Yellow Zinc Galvanzied Is Used
- Securing wire rope ends on crane hoists and lifting slings in construction sites
- Forming loops in wire rope for rigging and hoisting operations
- Terminating wire rope on winches and anchor systems in marine and offshore applications
- Connecting wire rope sections in temporary industrial rigging setups
- Installing wire rope on trailers and truck-mounted lifting equipment
- Creating fixed loops in wire rope for guy wires and structural support
- Field repairs and maintenance where quick, reliable rope termination is needed
Who It Is For
Buyers This Product Is Built For
- Rigging contractors needing reliable wire rope termination for lifting and hoisting
- Construction site supervisors specifying secure rope connections for cranes and hoists
- Marine and offshore operators securing anchor lines and mooring systems
- Industrial maintenance teams installing or repairing wire rope systems
- Truck and trailer manufacturers integrating wire rope clamps into tie-down systems
- Equipment rental companies stocking cost-effective, field-installable rope fittings
- Procurement engineers sourcing standardized wire rope clips across multiple projects
Problems It Solves
Problems This Product Removes
- Wire rope ends fraying or slipping due to inadequate termination
- Need for a low-cost, field-installable solution that doesn’t require welding or special tools
- Corrosion damage on uncoated clamps in humid or saltwater environments
- Inconsistent clamping force from poorly designed or low-strength fittings
- Lack of standardized dimensions across suppliers leading to mismatched parts
- Multiple suppliers required for different wire rope sizes and applications
- Inability to secure wire rope loops reliably in temporary or high-vibration setups
Technical Features
Technical Features
- Malleable iron body with cast construction for impact resistance
- Steel U-bolt with threaded ends for high tensile clamping
- Saddle plate positioned on top of the wire rope to prevent rope deformation
- Zinc-plated finish for corrosion protection in outdoor and marine use
- Dimensions standardized from 6mm to 50mm for compatibility with common wire rope sizes
- Two nuts threaded onto the U-bolt to apply even clamping force
- Designed for use with wire rope diameters matching the clamp size
Specifications
Steel Rope Clamp a Type Yellow Zinc Galvanzied Specifications
Values published in the Kailipu catalogue for this item. Anything not listed is available on request.
| Material | Malleable iron body, steel U-bolt |
|---|---|
| Finish | Zinc plated |
| Size Range | 6mm to 50mm wire rope diameter |
| Standard | China standard Type A |
| Clamp Type | U-bolt with saddle and two nuts |
| Application | Wire rope termination, loop formation, connection |
| Dimensions | A, B, C, D, E, F, G as per size table |
| Processing | Malleable cast body, steel U-bolt |
| Packaging | Cartons then packed on pallets |
Full size table on request. The catalogue publishes a full dimension and capacity table for this item. Ask on WhatsApp or by email and we will send it as a PDF.
Materials
Materials And Finishes
- Malleable iron body cast for strength and ductility
- Steel U-bolt for high tensile clamping force
- Zinc plating over the entire clamp body for corrosion resistance
- Steel nuts with thread integrity for repeated tightening and loosening
Manufacturing Process
How This Product Is Made
1Molding of malleable iron body using sand casting
2Machining of U-bolt and saddle components
3Assembly of U-bolt, saddle, and nuts
4Zinc plating of all metal parts for corrosion protection
5Inspection of dimensions and surface finish
6Packing in cartons and palletizing for export
Quality Control
Quality Control On Every Batch
- Dimensional tolerance check against published size table
- Visual inspection for casting defects and plating quality
- Proof load test on production batches
- Material Test Certificate to EN 10204 3.1 supplied with orders
- Breaking strength validation to confirm design integrity
- Third-party inspection accepted before shipment
Customisation
Customisation Options
- Custom tonnage stamping on the clamp body
- Private label and OEM marking available
- Custom surface finish including zinc plating, powder coating, or electrophoretic black
- Custom sizes and assemblies built to a supplied drawing
- Custom carton and pallet packing configuration
Compare
How It Compares With The Alternatives
An honest read on where this pattern wins and where another one would serve you better.
| Alternative | Honest Trade Off |
|---|---|
| Welded rope clamp | Type A clamp is field-installable and reusable; welded clamps are permanent and require welding equipment |
| Swage fitting | Type A clamp is less expensive and easier to install but may not hold as securely under repeated dynamic loads |
| Screw pin shackle | The clamp is simpler and cheaper but lacks the adjustability and reusability of a screw pin shackle |
| Ratchet clamp | The Type A clamp is lower cost and lighter but requires manual torqueing and has no self-tightening feature |
Use Guide
How To Use And Inspect Steel Rope Clamp a Type Yellow Zinc Galvanzied
- Match the clamp size to the wire rope diameter as per the size table
- Position the saddle on the live end of the rope and the U-bolt on the dead end
- Tighten the nuts alternately to ensure even clamping force
- Torque to the recommended value if specified, or tighten until the rope is fully compressed
- Inspect the clamp after initial use and regularly during service
- Retire the clamp if the U-bolt shows deformation, the saddle cracks, or the plating is damaged
- Do not reuse a clamp that has been subjected to a load beyond its rated capacity
Related Products
Often Ordered With This Item
Steel Cable Fasteners Wire Rope Clamp &Thimble & Sleeve Set- Customizable Packaging
Wire Rope Clamp And Thimble Set Customizable Packaging
Fist Grip Clamp G-429 US Type Drop Forged Wire Rope Termination
Wire Rope Fastener | Cable Clamps | Wire rope Clips
Rope Wire Clips A Type Yellow Zinc Galvanzied
1 8 Cable Clamp US Type Malleable Wire Rope Clip
3 8 Cable Clamp US Type Malleable Wire Rope Clip
US Type Drop Forged Wire Rope Clips G 450
Browse The Category
Industries Using This Product
Sourcing Support For This Product
Guides Worth Reading Before You Order
Answers
Steel Rope Clamp a Type Yellow Zinc Galvanzied FAQ
What size clamp do I need for a 10mm wire rope?
Use a 10mm size clamp, which is designed for wire rope diameters from 8mm to 12mm.
Can I reuse a steel rope clamp after it has been loaded?
Yes, if the clamp shows no visible deformation, the U-bolt is intact, and the plating is undamaged. Inspect before reuse.
Is the zinc plating sufficient for marine use?
Yes, the zinc plating provides corrosion resistance for outdoor and marine environments, but periodic inspection is recommended.
What is the difference between Type A and Type B clamps?
Type A has a saddle on top of the rope; Type B has the saddle on the dead end. Type A is standard in China for most applications.
Can you provide Material Test Certificates?
Yes, Material Test Certificates to EN 10204 3.1 are supplied with each order upon request.
How are the clamps packed for export?
Clamps are packed in cartons, then palletized. Custom carton and pallet configurations are available to match your warehouse or retail needs.
Can you stamp our brand or custom tonnage?
Yes, custom tonnage stamping, private label marking, and OEM packaging are standard options.
Need A Quote On Steel Rope Clamp a Type Yellow Zinc Galvanzied
Send the sizes, the finish and the quantity on WhatsApp or by email. You get a priced reply within 24 hours and a straight answer on stock.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.