Wire Rope Clips
Rope Wire Clips A Type Yellow Zinc Galvanzied
A Type A wire rope clip made from malleable iron with a steel U-bolt and zinc-plated finish, used to secure wire rope ends in rigging, construction, marine, and industrial applications. The clip features a U-bolt, saddle, and two nuts for clamping, with sizes ranging from 6mm to 50mm. It is designed for field or shop installation and provides a cost-effective termination solution.
- Size
- from 6 to 50mm Processing: Malleable Cast Body, Steel U Bolt
- Material
- Malleable Iron
- Finish
- Zinc Plated Package: Cartons then pack on pallets
- Catalogue Family
- Wire Rope Clips
- Certificates
- EN 10204 3.1 material test certificate on request
CAD files are supplied on request via WhatsApp or email rather than published for open download.
Key Benefits
What Rope Wire Clips a Type Yellow Zinc Galvanzied Gives You
- Malleable iron body with steel U-bolt offers strong clamping force and impact resistance
- Zinc-plated finish resists corrosion in outdoor and marine environments
- Simple design allows installation in the shop or in the field with basic hand tools
- Standardized size range from 6mm to 50mm covers most common wire rope diameters
- Saddle placed on the live end of the rope prevents slippage and maintains rope integrity
- Two nuts on the U-bolt allow for even clamping force and secure tightening
- Cost-effective alternative to more complex wire rope terminations
Application Scenarios
Where Rope Wire Clips a Type Yellow Zinc Galvanzied Is Used
- Terminating wire rope ends on crane hoist lines in construction sites
- Creating loops or eyes in wire rope for lifting and rigging operations
- Securing wire rope on marine winches and mooring systems exposed to saltwater
- Connecting wire rope sections in temporary industrial rigging setups
- Field repairs on wire rope systems where a full splice is not feasible
- Mounting wire rope on trailers and transport equipment for load securing
Who It Is For
Buyers This Product Is Built For
- Rigging contractors needing reliable, low-cost wire rope terminations
- Construction site supervisors specifying wire rope fittings for crane and hoist systems
- Marine equipment suppliers equipping boats and offshore platforms with wire rope hardware
- Industrial maintenance teams performing on-site wire rope repairs
- Logistics and transport operators securing cargo with wire rope systems
- Rigging distributors stocking a standard wire rope clip for general use
Problems It Solves
Problems This Product Removes
- Wire rope ends fraying or unraveling without a secure termination method
- Need for a low-cost, field-installable solution instead of complex splicing
- Corrosion damage on uncoated metal fittings in wet or salty environments
- Lack of standardization in wire rope clips across different suppliers
- Multiple parts or tools required for wire rope termination
- Inconsistent clamping force due to poorly designed or loose-fitting clips
Technical Features
Technical Features
- Malleable iron body with cast-in steel U-bolt for strength and durability
- Zinc-plated finish for corrosion resistance in harsh environments
- Saddle placed on the live end of the rope to prevent rope slippage
- Two nuts threaded onto the U-bolt for even clamping force
- Standardized dimensions across sizes from 6mm to 50mm
- Designed for use with wire rope diameters matching the specified size
- No specific design factor stated; intended for general rigging use
Specifications
Rope Wire Clips a Type Yellow Zinc Galvanzied Specifications
Values published in the Kailipu catalogue for this item. Anything not listed is available on request.
| Material | Malleable iron body, steel U-bolt |
|---|---|
| Finish | Zinc plated |
| Size Range | 6mm to 50mm wire rope diameter |
| Standard | China standard Type A |
| Clamp Type | U-bolt with saddle and two nuts |
| 6mm Dimensions | A 12 B 17 C 14 D 5 E 14 F 23 G 24.8 mm |
| 10mm Dimensions | A 19 B 28 C 20 D 8 E 21 F 38 G 37.95 mm |
| 20mm Dimensions | A 36 B 47 C 36 D 14 E 38 F 62 G 71.73 mm |
| 32mm Dimensions | A 55 B 67 C 51 D 22 E 61 F 93 G 110.4 mm |
| 50mm Dimensions | A 80 B 95 C 80 D 30 E 95 F 135 G 156 mm |
Full size table on request. The catalogue publishes a full dimension and capacity table for this item. Ask on WhatsApp or by email and we will send it as a PDF.
Materials
Materials And Finishes
- Malleable iron body cast to shape with high impact resistance
- Steel U-bolt for tensile strength and clamping force
- Zinc plating applied to the entire assembly for corrosion protection
- Two nuts made from carbon steel for secure thread engagement
Manufacturing Process
How This Product Is Made
1Malleable iron casting of the body with precision mold
2Steel U-bolt fabrication and threading
3Assembly of U-bolt into the body
4Zinc plating of the complete assembly
5Inspection of dimensions and finish
6Packing in cartons, then palletized for export
Quality Control
Quality Control On Every Batch
- Dimensional tolerance check against published size table
- Visual inspection for plating defects and casting flaws
- Clamping force test on a sample batch
- Material composition verified by supplier records
- No proof load testing or breaking strength validation stated
Customisation
Customisation Options
- Custom tonnage stamping on the body
- Private label and OEM marking available
- Custom surface finish including zinc plating, powder coating, or electrophoretic black
- Custom sizes and assemblies built to a supplied drawing
- Custom carton and pallet packing configuration
Compare
How It Compares With The Alternatives
An honest read on where this pattern wins and where another one would serve you better.
| Alternative | Honest Trade Off |
|---|---|
| Wire rope splices | Clips are faster to install and require no special tools, but splices offer higher strength and longer service life |
| Screw pin shackles | Clips are cheaper and simpler, but shackles allow for repeated adjustment and are easier to inspect |
| Swage fittings | Swage fittings provide a permanent connection with higher strength, but require a press and are not field-repairable |
| Other clip types | Type A is standard in China and widely available, but other types may offer better load distribution or higher rated capacity |
Use Guide
How To Use And Inspect Rope Wire Clips a Type Yellow Zinc Galvanzied
- Always place the saddle on the live end of the wire rope to prevent slippage
- Tighten the nuts alternately to ensure even clamping force
- Use the correct number of clips based on wire rope diameter—minimum of three for most applications
- Check the tightness of the nuts after initial loading and periodically during use
- Replace the clip if the U-bolt shows deformation or the plating is damaged
- Do not reuse clips after a failure or heavy load event
Related Products
Often Ordered With This Item
Steel Cable Fasteners Wire Rope Clamp &Thimble & Sleeve Set- Customizable Packaging
Wire Rope Clamp And Thimble Set Customizable Packaging
Fist Grip Clamp G-429 US Type Drop Forged Wire Rope Termination
Wire Rope Fastener | Cable Clamps | Wire rope Clips
Steel Rope Clamp A Type Yellow Zinc Galvanzied
1 8 Cable Clamp US Type Malleable Wire Rope Clip
3 8 Cable Clamp US Type Malleable Wire Rope Clip
US Type Drop Forged Wire Rope Clips G 450
Browse The Category
Industries Using This Product
Sourcing Support For This Product
Guides Worth Reading Before You Order
Answers
Rope Wire Clips a Type Yellow Zinc Galvanzied FAQ
What is the difference between Type A and other wire rope clips?
Type A follows the China standard with a malleable iron body and U-bolt design, commonly used for general rigging and cost-effective applications.
Can these clips be used on synthetic rope?
No. These clips are designed for wire rope only. Synthetic ropes require different termination methods to avoid damage.
What size clip do I need for a 20mm wire rope?
Use a 20mm size clip. The dimensions are A 36, B 47, C 36, D 14, E 38, F 62, G 71.73 mm.
Is proof load testing done on these clips?
No proof load testing is mentioned in the source. The clips are manufactured to standard dimensions and material specifications.
Can you provide a Material Test Certificate?
Material Test Certificate to EN 10204 3.1 is supplied with orders on request.
What is the finish and how does it resist corrosion?
The clips are zinc plated. This finish provides moderate corrosion resistance in outdoor and marine environments, but may degrade over time in harsh conditions.
How are they packed for export?
Clips are packed in cartons, then palletized. Custom carton and pallet configurations are available to suit your warehouse or shipping needs.
Need A Quote On Rope Wire Clips a Type Yellow Zinc Galvanzied
Send the sizes, the finish and the quantity on WhatsApp or by email. You get a priced reply within 24 hours and a straight answer on stock.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.