Rigging Hardware
G43 and G70 Hooks
The load-bearing connector used to join a chain, sling or wire rope to a load or lifting point. Kailipu offers 28 catalogued G43 and G70 hooks across eye, clevis, grab and slip patterns, so a buyer can cover a full rigging hook requirement on one order without sourcing from multiple specialty manufacturers.
All 28 G43 and G70 Hooks
Every catalogued line in G43 and G70 Hooks, nothing paginated
Bolt-On Tow Hook with Safety Latch
Grade 70 Bolt-On Grab Hook with Backer Plate
5/16 G70 Mini J Hook | Compact Frame J Hook
Triangle Snap Hook, Triangle Ring Safety Hook For Lashing Strap
Clevis Grab Hook with Safety Latch A330N Grade 70
Weld On Grab Hook Grade 70 Forged Steel Chain Hooks
Eye J Hook 8" Tow J Hook Short Type, G70 WLL 4700LBS
Eye J Hook 15" Towing Long Shank Hook,Grade 70 Forged Steel WLL 4700LBS
8 Inch Clevis Short J Tow Hook Grade 70 Forged Steel WLL 5400LBS
15 Inch Clevis J Tow Hook Grade 70 Forged Steel WLL 5400LBS
RTJ Cluster Hooks Grade 70 Forged Steel WLL 4800 LBS
Mini J Hook Grade 70 Forged Steel 5/16"-3/8" /7-8mm, WLL 5400LBS
Twisted T/J Combo Hook Grade 70 Forged Steel 5/16"/8mm, Safe Working Load 4700LBS
T Hook For Towing 5/16"/8mm, WLL 4700LBS
R Hook Grade 70 Towing Hook 5/16"/8mm, WLL 4700LBS.
Swivel Lifting Hook, Eye Hoist Hook Grade 70 322A
Eye Slip Hook with Latch Grade 70 A324
Eye Hoist Hook With Latch 320C
Eye Grab Hook Grade G43 H323
Clevis Slip Hook Grade 70 Yellow Zinc-Plated A331
Clevis Grab Hook Grade 70 Yellow Zinc-Plated A330
322C Swivel Eye Hoist Hook Grade 43
Eye Slip Hook with Latch Grade 43 H324
Eye Hoist Hook With Latch 320A
Eye Grab Hook Grade 70 A323
DIN 689 Eye Load Hook With Latch
Clevis Slip Hook Grade 43 Zinc-Plated H331
Clevis Grab Hook Grade 43 Zinc-Plated H330
Who It Is For
Buyers Who Specify G43 and G70 Hooks
- Rigging and lifting distributors building a complete hook range under one brand
- Crane hire and lifting service companies replenishing hooks across a fleet of equipment
- Marine and offshore contractors needing hot dip galvanised G43 and G70 hooks for deck and mooring systems
- Towing and recovery operations specifying slip and grab hooks for vehicle recovery and chain link-ups
- Steel fabricators and precast plants integrating hooks into lifting sets for structural components
Problems Solved
What G43 and G70 Hooks Solve on the Job
- A rigging bill of materials missing a specific hook size or pattern because the supplier only stocks one type from one forge
- A grab hook arriving without a safety latch when the job requires a slip hook with a latch to prevent accidental disengagement
- A hook sized by the chain wire diameter when the application requires sizing by the working load limit, leading to an incorrect load rating
- No Material Test Certificate available, so the hook cannot be documented in a lifting register or safety audit
- A hook with a thin electro-galvanised coating used in a marine environment where hot dip galvanising is required for corrosion resistance
- Small top-up orders rejected by specialist suppliers who only accept full container loads
Why Kailipu
Why Buy G43 and G70 Hooks from Kailipu
- 28 catalogued G43 and G70 hook lines across eye, clevis, grab and slip patterns in one purchase order
- Core patterns including eye hoist hooks, clevis grab hooks and slip hooks with safety latch options
- Choice of hot dip galvanised, zinc plated or electro-galvanised finish depending on environmental exposure
- Sizing by working load limit or chain wire diameter as specified, with WLL stamped on the bow
- Material Test Certificate to EN 10204 3.1 supplied with each batch on request
- Proof load testing, dimensional tolerance checking and breaking strength validation performed before release
- Custom tonnage stamping, private label marking and custom packing available for branded programmes
- Direct supply from the original manufacturer with no middleman layer, accepting small top-up orders
Applications
Where G43 and G70 Hooks Are Used
- Connecting a tow chain to a vehicle recovery system where a slip hook with a safety latch prevents accidental disengagement
- Securing a steel beam to a crane hook using a G70 eye hoist hook rated for the load and marked with WLL
- Linking a chain sling to a lifting anchor on a precast concrete panel using a clevis grab hook with a secure open design
- Deck rigging on a vessel where a hot dip galvanised G43 hook is required for long-term exposure to saltwater
- Towing operations in a quarry where a G70 grab hook is used to connect a chain to a heavy hauler without a safety latch
Industries That Use This Category
Related Product Families
Answers
G43 and G70 Hooks FAQ
What does G43 and G70 mean on a hook?
G43 and G70 are chain grade designations, and the hook has to match the grade of the chain it is used with. G70 is the higher-strength transport and towing grade and normally carries a gold chromate finish; G43 is the lighter commercial grade in plain or zinc plated finish.
How are rigging hooks sized?
Hooks are sized either by the chain wire diameter they are designed to fit, such as 5/16", or by their working load limit, such as 1t. The size is stamped on the bow and listed in the product details.
What is the difference between a slip hook and a grab hook?
A slip hook has a safety latch to prevent accidental disengagement. A grab hook does not have a safety latch and is used for temporary or frequent connections where quick release is needed.
What is the design factor for these hooks?
The standard design factor for rigging hardware is 4:1. This means the minimum breaking load is four times the working load limit. This factor applies to G43 and G70 hooks unless otherwise stated.
Do you supply Material Test Certificates?
Yes. A Material Test Certificate to EN 10204 3.1 is issued with each batch on request. It includes material composition and mechanical properties for traceability.
Can you custom stamp tonnage and add private label?
Yes. Custom tonnage stamping, private label marking, and coloured finishes are available. Send the marking layout and pack format, and we will incorporate it into the production run.
What finishes are available for G43 and G70 hooks?
Standard finishes include hot dip galvanised, zinc plated, and electro-galvanised. Electrophoretic black and powder coating are also available for custom surface finishes.
Get a Quote on G43 and G70 Hooks
Send the sizes, capacities and finish you need. We reply within 24 hours with prices and the stock position line by line.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.