Product Family
Marine Anchors from a Qingdao Supplier
The critical link between a vessel and the seabed, ensuring reliable mooring in dynamic marine environments. Kailipu supplies stud link and studless anchor chains in Grades M1, M2, and M3 from ø16mm to ø165mm, with full certification support from ABS, LR, BV, DNV, KR, NK, CCS, RINA, RMRS, IRS, and CR, so a marine contractor can source the entire anchor chain system on one order without chasing multiple suppliers.
All 1 Marine Anchors
Every catalogued line in Marine Anchors, nothing paginatedWho It Is For
Buyers Who Specify Marine Anchors
- Marine contractors and shipyards building or maintaining anchor systems for commercial vessels
- Offshore oil and gas operators specifying anchor chains for floating production units and mooring systems
- Ship owners and fleet managers replacing or upgrading anchor chains on vessels of all sizes
- Marine equipment suppliers sourcing full anchor chain systems with certified components
- Port authorities and harbor operators requiring compliant chains for mooring buoys and fixed installations
Problems Solved
What Marine Anchors Solve on the Job
- A vessel's anchor system fails to hold during storm conditions because the chain grade does not match the expected sea state
- A ship’s anchor chain lacks certification from a major classification society, delaying port entry or vessel inspection
- The chain length is too short for deep-water anchoring, so the anchor cannot achieve proper scope and grip the seabed
- A studless chain is used in high-stress mooring where a stud link chain with higher strength is required
- No traceability or material test certificate available for the chain, making it impossible to verify compliance with marine standards
- A single anchor chain order split across three suppliers leads to mismatched links, inconsistent finishes, and delayed delivery
Why Kailipu
Why Buy Marine Anchors from Kailipu
- Full range of stud link and studless anchor chains in Grades M1 M2 M3 from ø16mm to ø165mm, covering most vessel sizes
- Chain links manufactured to meet standards including DIN 1480 DIN 580 DIN 582 and EN 818-2, with certification from ABS LR BV DNV KR NK CCS RINA RMRS IRS CR available on request
- Stud link chains offered for higher strength applications, especially M3 grade for severe sea conditions
- Standard length of 27.5 meters per link (15 fathoms 90 feet), with multiple links connected via shackles or connecting links to achieve required chain length
- Material Test Certificates to EN 10204 3.1 issued with each batch, and proof load testing performed on production batches
- Custom tonnage stamping and private label marking available for branded chain systems
- Direct supply from the manufacturer with no middleman, allowing full traceability and consistent quality across orders
- Support for mixed orders including chains, shackles, and connecting links to form a complete anchor system
Applications
Where Marine Anchors Are Used
- Securing a 10,000-ton cargo vessel in a deep-water harbor using a 12-link anchor chain with M3 stud link chain for high-stress mooring
- Mooring a floating offshore unit in a high-wind zone where the chain must withstand dynamic loads and resist corrosion
- Replacing the anchor chain on a fishing vessel with a studless chain in Grade M2 for cost-effective but reliable service
- Supplying a marine contractor with a full anchor chain system including connecting links and shackles for a new offshore platform
- Providing a shipyard with a batch of M3 stud link chains certified to DNV and ABS for a new vessel under construction
Industries That Use This Category
Related Product Families
Guides About This Category
Answers
Marine Anchors FAQ
What is the difference between stud link and studless anchor chains?
Stud link chains have a central stud in each link, increasing strength and wear resistance. Studless chains lack this stud, are lighter and less expensive but have lower strength. Stud link chains are preferred for high-stress offshore applications.
What do M1 M2 M3 mean on an anchor chain?
M1 M2 M3 are steel grades used in anchor chain production. M1 is the lowest strength, M2 moderate, and M3 the highest. M3 is typically used in severe sea conditions and offshore mooring systems.
Which classification societies certify marine anchor chains?
Common certification bodies include ABS LR BV DNV KR NK CCS RINA RMRS IRS and CR. Chains can be certified to one or more of these standards depending on the vessel’s operating region and requirements.
What is the standard length of an anchor chain link?
One standard link is 27.5 meters (15 fathoms 90 feet). This length is used to calculate the total chain length required for a vessel based on water depth and scope.
Do you supply Material Test Certificates with anchor chains?
Yes. A Material Test Certificate to EN 10204 3.1 is issued with each batch on request. Proof load testing and dimensional checks are performed before release.
Can you custom stamp tonnage or add private labels?
Yes. Custom tonnage stamping, private label marking, and branded packaging are available. Send the marking layout and pack configuration for inclusion in the order.
What is the minimum order quantity for anchor chains?
We accept small orders and mixed shipments. The point of a one-stop supply is to cover full anchor systems without requiring a full container of one size. Send your line list and we will quote accordingly.
Get a Quote on Marine Anchors
Send the sizes, capacities and finish you need. We reply within 24 hours with prices and the stock position line by line.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.