Product Family
Other Lifting Tools from a Qingdao Supplier
Tools that grip, pull, and tighten wire rope or cable during installation, tensioning, or maintenance. Kailipu offers two lifting tools for cable and wire rope handling from 0.5 t to 3 t, with yellow chromate finish and standard carton and pallet packing, so a buyer can source both tools in one order without contacting separate manufacturers.
All 2 Other Lifting Tools
Every catalogued line in Other Lifting Tools, nothing paginated
Who It Is For
Buyers Who Specify Other Lifting Tools
- Cable installation teams working on overhead power lines or pre-stressed concrete structures
- Marine and offshore rigging crews installing or tensioning mooring cables
- Construction firms pulling cables through conduits or ducts in high-rise buildings
- Maintenance teams replacing or tensioning wire rope in cranes or hoists
- Electrical contractors setting up overhead transmission lines where pulling force must be controlled
- Rigging suppliers building complete tool kits for field crews
Problems Solved
What Other Lifting Tools Solve on the Job
- A job site where the cable puller fails because the tool is not rated for the wire rope diameter being used
- A tool arriving with a finish that does not suit the environment, such as a plain finish in a coastal or high-moisture area
- No standard packing method, so tools arrive loose and damaged during transit
- A mismatch between the tool’s rated capacity and the actual cable size, leading to slippage or failure
- Two separate suppliers needed for a puller and a clamp, increasing lead time and order complexity
- No traceability or test records for the tool, so it cannot be verified for use in a safety-critical lift
Why Kailipu
Why Buy Other Lifting Tools from Kailipu
- Two tools in one category: Cable Wire Grip Puller and Steel Rope Jaw Clamp Pulling Tightening Tool, covering 0.5 t to 3 t
- Available in four sizes: 0.5T (1–10 mm), 1T (1–10 mm), 2T (4–22 mm), 3T (16–32 mm) cable or wire rope
- Yellow chromate finish for corrosion resistance in moderate environments
- Standard carton and pallet packing for safe transport and warehouse handling
- Proof load testing and dimensional checking on production batches
- Material Test Certificate to EN 10204 3.1 issued with batch on request
- Custom tonnage stamping and private label marking available
- Direct supply from the manufacturer, no middleman, with small orders accepted
Applications
Where Other Lifting Tools Are Used
- Pulling a 10 mm cable through a conduit in a high-rise building using a 1T cable wire grip puller
- Tightening a 22 mm wire rope on a crane hoist using a 2T steel rope jaw clamp
- Installing a 32 mm mooring cable on a barge with a 3T jaw clamp in a marine environment
- Tensioning a pre-stressed cable in a bridge deck using a 3T puller with yellow chromate finish
- Replacing a damaged cable in a crane system where a 2T tool is needed for controlled pulling
- Field crews assembling a lifting kit that includes both a puller and a clamp for cable installation
Industries That Use This Category
Related Product Families
Answers
Other Lifting Tools FAQ
What is the working load limit for each tool size?
The working load limit is based on the cable or wire rope diameter. The 0.5T tool is rated for 1–10 mm cable, 1T for 1–10 mm, 2T for 4–22 mm, and 3T for 16–32 mm. The WLL is not stated separately but is derived from the tool’s design and test data.
What does yellow chromate finish mean?
It is a surface treatment that provides moderate corrosion resistance. It is suitable for indoor or dry environments. It is not intended for prolonged exposure to saltwater or high humidity.
Can I use the 2T tool on a 10 mm cable?
No. The 2T tool is rated for 4–22 mm wire rope. A 10 mm cable falls within the 0.5T and 1T tool ranges. Use the correct tool for the diameter to avoid slippage or failure.
Do you supply test certificates with the tools?
Yes. A Material Test Certificate to EN 10204 3.1 is issued with the batch on request. Every batch undergoes proof load testing, dimensional checking, and breaking strength validation.
Can you custom stamp tonnage or add our logo?
Yes. Custom tonnage stamping, private label marking, and retail packing are available. Provide the marking layout and pack format, and we will include it in the order.
What is the packing method?
Tools are packed in cartons and palletised for shipping. Standard carton and pallet packing is used. Custom carton and pallet configuration is available upon request.
What is the smallest order you accept?
We accept small orders for these tools, especially when combined with other rigging items. Send the line list and we will quote it as-is without requiring a full container.
Get a Quote on Other Lifting Tools
Send the sizes, capacities and finish you need. We reply within 24 hours with prices and the stock position line by line.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.