Chengyang District, Qingdao, China Mon-Sat 08:30-18:00 GMT+8
[email protected] +86-18660236941
Kailipu Rigging & Cargo Control Request A Quote
Floating offshore wind turbine on a yellow platform at sea with a blue service vessel and small tugboat nearby
Industry Application

Rigging and Cargo Control for Oil and Gas

Offshore lifting operations, securing heavy drilling components, and pipeline support systems demand rigging hardware that performs under extreme conditions. Kailipu supplies the full range of oil and gas rigging components from Qingdao on a single purchase order, including shackles, Grade 80 hooks, links, lifting chains, wire rope, pulley blocks, turnbuckles, and webbing slings, all built to withstand marine exposure and high-duty service.

Get A Custom Solution Talk To An Engineer
Industry Pain Points

What Goes Wrong in Oil and Gas

  • A shackle rated at 100 tons but let down by a Grade 43 pin that fails under repeated load cycles
  • Chain links with inconsistent heat treatment causing premature fatigue in offshore lifting
  • Wire rope that frays at the eye splice due to improper fitting or mismatched thimble size
  • Pulley blocks with seized bearings after exposure to saltwater and high humidity
  • Hooks with latch mechanisms that fail to engage properly under dynamic load
  • No traceable material certificate when a class society audit requires proof of compliance
  • Multiple suppliers for different parts leading to mismatched ratings and delayed project timelines
What Buyers Need

What Oil and Gas Buyers Actually Specify

  • Shackles, hooks, and links with a 4:1 design factor and proof load tested with the record kept for the batch
  • Grade 80 alloy steel components heat treated and quenched for consistent hardness and fatigue resistance
  • Hardware with surface finishes such as hot dip galvanizing, powder coating, or electrophoretic black to resist marine corrosion
  • Components marked with WLL and traceability codes for audit readiness and chain of custody
  • Class certificates such as ABS, LR, BV, DNV, GL, RINA, KR, NK, RS, and CCS available on request
  • Matched assemblies where all components carry the same working load limit and are tested as a system
  • One consolidated order across multiple rigging families to avoid sourcing delays and mismatched specs
Suitable Products

Product Families for Oil and Gas

The families that carry the lines this sector orders most. Open one to see every catalogued item in it.

Heavy duty bow shackle with a red rotating roller and black body on white background

Shackles

US Crosby, European and JIS pattern shackles from 0.33 t to 300 t in galvanised and hot dip finishes

39 ProductsYellow forged steel self-locking lifting hook with eye and safety latch on white background

Grade 80 Hooks

Grade 80 lifting hooks in single and double designs, high-strength alloy steel, powder coated finish, WLL marked on bow

20 ProductsRed painted metal lifting ring with embossed markings on a white background

Grade 80 Links

Grade 80 master links and ring connectors in A342 A343 A345 A346 patterns from 1 in to 4 in, galvanised or plain finish

15 ProductsShort section of black steel chain with three interlocking links on a plain white background

Lifting Chains

Grade 80 and Grade 100 alloy steel lifting chains in EN818-2 EN818-7 AS2321 ASTM973 and NACM2010 standards, with WLL stamped on each link

7 ProductsTechnical cross-section diagram of a steel wire rope with a central core and surrounding strands

Wire Rope

6X7+FC, 6X19+FC, 6X37+FC, 6X19+FC/IWRC, 7X7, 7X19, 6X24+7FC constructions in galvanised, bright, and coated finishes

20 ProductsCross-section diagram of wire rope showing six strands of wires around a central core

Lifting Wire Rope

6X7+FC 6X19+FC 6X24+7FC 6X37+FC and 6X19+FC/IWRC constructions in galvanised and bright finishes

15 ProductsPolished metal double-sheave pulley block with fixed eye and brass wheels, isolated on white background

Pulley Blocks

Cast iron and zinc alloy pulley blocks from 0.5 t to 20 t, including snatch blocks with shackle and hook, single and double sheave, with HDG and red f

29 Products3D render of a metal rod with clevis fork ends and pins, isolated on white background

Turnbuckles

US drop forged, DIN standard, and commercial type turnbuckles from 6 mm to 40 mm in galvanised steel and stainless steel

54 ProductsCoiled purple woven webbing sling with black center line and blue tag on a white background

Webbing Slings

Flat, endless, round eye and eye, and polyester round slings in 60 catalogued lines with colour-coded load capacity and EN 1492-1/2 compliance

60 Products
Recommended Items

Lines Ordered Most for Oil and Gas

Heavy duty bow shackle with a red rotating roller and black body on white background Shackles Drop Forged Roller Shackle with Hexagon Bolt Pin and Nut, Sheave / Pulley D Shackle 3T-85T Galvanized steel bow shackle with red pin, hex nut and cotter pin, isolated on white background Shackles Crosby Wide Body Shackles Galvanized steel bow shackle with green pin, nut, and split pin on white background Shackles G2160 Shackle Crosby Wide Body Shackles Gray bow shackle with red screw pin on a plain white background Shackles Wide Body Shackle Crosby G-2160 Red painted forged steel chain connecting link centered on a plain white background Marine Chains Lugless Joining Shackle - Kenter Link - End Shackle -Swivel Set From 12.5mm to 162mm Galvanized Kenter link joining shackle on a white background Marine Chains Kenter Link - Joining / End Shackle -Swivel Set From 12.5mm to 162mm Yellow forged steel self-locking lifting hook with eye and safety latch on white background Grade 80 Hooks G80 Eurpean Type Eye Self-locking Safety Hook From 6-8 to 32-8 Processing: Drop Forged / Q Red painted alloy steel eye grab hook with forged size markings, isolated on white background Grade 80 Hooks G80 Eye Shorterning Grab Hook From 6-8 to 22-8 Processing: Drop Forged / Q
Typical Applications

Typical Applications in Oil and Gas

  • Offshore platform lifting of drilling risers using drop forged roller shackles with hexagon bolt pins and powder coated finish
  • Securing heavy pipeline sections on deck with Grade 80 eye grab hooks and swivel sets rated for dynamic loads
  • Running wire rope through pulley blocks on a crane system with sheave bearings designed for continuous marine service
  • Connecting lifting chains to shackles and hooks on a subsea intervention rig using welded joining shackles with galvanized finish
  • Using turnbuckles to tension mooring lines on a floating production unit with Grade 80 threaded links
  • Lifting heavy casing heads with webbing slings and pulley blocks where the system must handle both static and dynamic loads
  • Recovery operations on a jack-up rig using wide body shackles with hot dip galvanized pins and high-strength alloy steel
Solution Flow

How an Order Runs for This Sector

1{'name': 'Send US the Lifting or Securing Task And', 'note': 'Send us the lifting or securing task and the required working load limit so we recommend the correct component and grade'}
2{'name': 'We Confirm the Material (alloy Steel) H', 'note': 'We confirm the material (alloy steel), heat treatment (quenched and tempered), and finish (powder coated, galvanized, or'}
3{'name': 'We Match the Shackle Hook Chain and W', 'note': 'We match the shackle, hook, chain, and wire rope to the same WLL and confirm every rated part has been proof load tested'}
4{'name': 'We Provide Material Test Certificates To', 'note': 'We provide material test certificates to EN 10204 3.1 and class society certificates on request for audit compliance'}
5{'name': 'We Stamp the WLL and Traceability Code O', 'note': 'We stamp the WLL and traceability code on each component and verify dimensional tolerances before production'}
6{'name': 'Assemblies Are Proof Tested and Marked B', 'note': 'Assemblies are proof tested and marked before packing, with full quality control completed before shipment'}
7{'name': 'Pre-Shipment Inspection Conducted with P', 'note': 'Pre-shipment inspection conducted with production 100 percent complete and packing 80 percent complete'}
8{'name': 'Goods Shipped Consolidated from Our Qing', 'note': 'Goods shipped consolidated from our Qingdao warehouse with export documentation handled in house by sea, air, or express'}
Delivery Capability

Delivery Capability for This Sector

  • Direct supply from the original manufacturer with no middleman layer
  • Production lead time evaluated from several angles before a date is confirmed
  • Free quality inspection of goods in our Qingdao warehouse before they leave China
  • Two months of free warehouse storage in China to consolidate shipments with other rigging lines
  • Export and import documentation handled in house by sea, air, or express
  • Custom surface finishes including powder coating, zinc plating, and electrophoretic black available
  • Class certificates such as ABS, LR, BV, DNV, GL, RINA, KR, NK, RS, and CCS supplied on request
  • Custom tonnage stamping and private label marking available for branded rigging kits

Sourcing Support For This Industry

Product SourcingPre-Shipment InspectionOrder Fulfilment

Related Guides

Navigating the 3 Most Common Used Rigging Equipment and Their ComponentsWhat Kinds of Lifting Riggings Are Included?What Do IPS and EIPS Refer to in Wire Rope?Types of Wire Rope ClipsWire Rope Sleeves Buying Guide
Answers

Oil and Gas Rigging FAQ

Are your Grade 80 hooks proof tested?
Yes, all Grade 80 hooks are proof load tested. The test is performed on production batches and documented for traceability.
What surface finishes are available for offshore use?
Available finishes include hot dip galvanizing, powder coating, electrophoretic black, and custom paint. These are selected for corrosion resistance in marine and offshore environments.
Do you supply class certificates for oil and gas applications?
Yes, class certificates such as ABS, LR, BV, DNV, GL, RINA, KR, NK, RS, and CCS are available on request. We provide documentation for each batch upon request.
Can you match a shackle, hook, and chain to the same working load limit?
Yes. We ensure all components in a lifting system carry the same WLL. The weakest component is not the limiting factor when all parts are rated to the same standard.
What is the design factor for your rigging hardware?
Standard design factor is 4:1 for rigging hardware unless otherwise stated. This applies to shackles, hooks, links, and pulley blocks unless a product specifies a different factor.
Can you supply custom tonnage stamping?
Yes. Custom tonnage stamping is available on request. We mark the WLL and traceability code on each component to meet audit and safety requirements.
How long is the lead time for new production?
New production lead time is approximately 25 days for manufacturing plus 7 days for packing, totaling about 35 days before shipment. This includes full quality control and pre-shipment inspection.

Get a Oil and Gas Rigging Package Quoted

Describe the duty, the load and the environment. We come back within 24 hours with the grade, the finish and the assembly that suits it.

Chat on WhatsApp Email Us A Quote Request Download Catalogue

We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.