G43 and G70 Hooks
8 Inch Clevis Short J Tow Hook Grade 70 Forged Steel WLL 5400LBS
An 8 inch forged steel clevis short J tow hook rated for 5400LBS working load limit, designed to attach directly to 5/16 inch or 3/8 inch tow chains without additional hardware. The J-shaped hook has a short profile for compact fitment, with a clevis end for chain connection and a drop-forged alloy steel body for strength under dynamic towing loads. Suitable for use with grade 70 chain or lower. Not rated for overhead lifting.
- Size
- 8"
- Working Load Limit
- 5400LBS Breaking Strength (lbs): 18800 LBS
- Material
- Alloy Steel Processing: Forged
- Finish
- Yellow chromate finish
- Packing
- Cartons + Pallets
- Catalogue Family
- G43 and G70 Hooks
- Certificates
- EN 10204 3.1 material test certificate on request
CAD files are supplied on request via WhatsApp or email rather than published for open download.
Key Benefits
What 8 Inch Clevis Short J Tow Hook Gives You
- Drop-forged alloy steel construction provides high impact resistance and durability under repeated towing stress
- Clevis end fits 5/16 inch or 3/8 inch chains directly with no extra fittings required
- Short J shape allows tight clearance in confined undercarriage spaces
- Yellow chromate finish resists corrosion in outdoor and wet environments
- 5400LBS WLL matched to grade 70 chain strength for safe towing performance
- Drop and twist locking action secures the hook in place on frame rails and unibodies
- Compact design reduces bulk compared to longer hook variants
Application Scenarios
Where 8 Inch Clevis Short J Tow Hook Is Used
- Towing a vehicle with a short hook in tight undercarriage clearance such as on Toyota or Honda models
- Securing a trailer or heavy equipment to a tow chain using a compact J-hook on a frame rail
- Using as a tie-down anchor point on a truck bed or trailer deck where space is limited
- Connecting a winch line to a chain anchor point in off-road recovery with limited clearance
- Mounting on unibody chassis for temporary or permanent tie-down securement
- Installing on a recovery kit where a small, secure hook is needed without adding bulk
Who It Is For
Buyers This Product Is Built For
- Fleet operators specifying compact tow hooks for commercial vehicle recovery kits
- Off-road recovery kit manufacturers integrating short J-hooks into their product lines
- Truck and trailer builders needing undercarriage tie-down points with minimal profile
- Auto salvage yards using short J-hooks for securing vehicles during transport
- Rigging distributors carrying a range of tow chain hardware with compatible fittings
- Marine and industrial contractors using chain-based towing in confined spaces
Problems It Solves
Problems This Product Removes
- Towing hooks that are too long for tight undercarriage clearance on compact vehicles
- Needing extra fittings to connect a hook to a chain, increasing cost and complexity
- Using a hook that is not compatible with the chain diameter, risking failure
- Lack of secure locking mechanism on standard hooks during dynamic pulls
- Overhead lifting being attempted with a non-rated tow hook, creating safety risk
- Buying a hook and chain from separate suppliers when they must be matched by grade and size
Technical Features
Technical Features
- Drop-forged alloy steel body for high strength and impact resistance
- Clevis end with 12.7mm diameter hole to fit 5/16 inch or 3/8 inch chains
- J-shaped hook with short profile for compact fitment
- Working load limit of 5400LBS stamped on the body
- Minimum breaking strength of 18800LBS verified by testing
- Yellow chromate finish for corrosion resistance in outdoor and wet conditions
- Designed for use with grade 70 chain or lower grade chain only
Specifications
8 Inch Clevis Short J Tow Hook Specifications
Values published in the Kailipu catalogue for this item. Anything not listed is available on request.
| Size | 8 inch (202 mm) |
|---|---|
| Working Load Limit | 5400 LBS |
| Minimum Breaking Strength | 18800 LBS |
| Material | Alloy Steel |
| Processing | Forged |
| Finish | Yellow chromate |
| Clevis Diameter | 12.7 mm |
| Chain Compatibility | 5/16 inch or 3/8 inch |
| Weight | 1.24 kg |
| Dimensions | A 210.0 mm B 12.4 mm C 12.7 mm D 25.5 mm |
Full size table on request. The catalogue publishes a full dimension and capacity table for this item. Ask on WhatsApp or by email and we will send it as a PDF.
Materials
Materials And Finishes
- Alloy steel body drop forged for strength and grain structure integrity
- Yellow chromate coating applied to resist rust and corrosion in humid or wet environments
- No additional hardware required for chain connection, reducing failure points
- Forged body maintains mechanical properties under high dynamic loads
Manufacturing Process
How This Product Is Made
1Forging of the alloy steel blank to shape under high pressure
2Heat treatment to achieve required mechanical properties
3Machining of the clevis hole and hook profile
4Surface treatment with yellow chromate finish
5Stamping of WLL and product marking on the body
6Proof load testing and final inspection before packing
Quality Control
Quality Control On Every Batch
- Proof load test on production batches before release
- Dimensional tolerance check against published size table
- Breaking strength validation to confirm 18800LBS minimum
- Visual inspection for surface defects and finish uniformity
- WLL and traceability marking stamped on the body
- Third-party inspection accepted at warehouse before shipment
Customisation
Customisation Options
- Custom tonnage stamping on the hook body
- Private label and OEM marking available
- Custom surface finish including zinc plating, powder coating, or electrophoretic black
- Custom sizes and configurations built to a supplied drawing
- Packing carton and pallet configuration tailored to buyer’s warehouse or retail needs
Compare
How It Compares With The Alternatives
An honest read on where this pattern wins and where another one would serve you better.
| Alternative | Honest Trade Off |
|---|---|
| Long J Hook | The short J hook fits in tighter spaces but has less clearance for chain movement and may be harder to install in tight areas |
| Screw Pin Hook | The clevis design eliminates the need for a screw pin and nut, reducing parts and potential for loosening under vibration |
| R Hook | The J hook is designed for foreign vehicle undercarriages and smaller holes, while the R hook is for Ford frame rails |
| T Hook | The T hook is for GM and Chrysler unibodies, while the J hook is for Toyota, Honda, and other foreign models |
Use Guide
How To Use And Inspect 8 Inch Clevis Short J Tow Hook
- Match the hook’s WLL to the chain’s working load limit, not the winch or vehicle rating
- Ensure the chain diameter (5/16 inch or 3/8 inch) matches the clevis hole size
- Do not exceed the 5400LBS working load limit under any dynamic or static condition
- Use only with grade 70 chain or lower; do not use with higher grade chains
- Drop and twist the hook to lock it securely in place on the frame rail or unibody
- Inspect the hook for deformation, wear, or finish damage before each use
- Retire the hook if the body shows cracks, the clevis is deformed, or the marking is illegible
Related Products
Often Ordered With This Item
Bolt-On Tow Hook with Safety Latch
Grade 70 Bolt-On Grab Hook with Backer Plate
5/16 G70 Mini J Hook | Compact Frame J Hook
Triangle Snap Hook, Triangle Ring Safety Hook For Lashing Strap
Clevis Grab Hook with Safety Latch A330N Grade 70
Weld On Grab Hook Grade 70 Forged Steel Chain Hooks
Eye J Hook 8" Tow J Hook Short Type, G70 WLL 4700LBS
Eye J Hook 15" Towing Long Shank Hook,Grade 70 Forged Steel WLL 4700LBS
Browse The Category
Industries Using This Product
Sourcing Support For This Product
Guides Worth Reading Before You Order
Answers
8 Inch Clevis Short J Tow Hook FAQ
Can this hook be used with 1/4 inch chain?
No. The clevis hole is sized for 5/16 inch or 3/8 inch chains. Using a smaller chain risks failure due to poor fit and stress concentration.
Is this hook rated for overhead lifting?
No. It is designed only for towing, pulling, and dragging with chain. It is not rated for overhead lifting or hoisting applications.
What is the minimum breaking strength?
The minimum breaking strength is 18800LBS, verified through proof load testing and dimensional checks.
Can I use this with grade 80 chain?
No. The hook is rated for grade 70 chain or lower. Using it with grade 80 chain exceeds the safe working load and creates a safety hazard.
What finish is applied?
The standard finish is yellow chromate. Custom finishes such as zinc plating, powder coating, or electrophoretic black are available on request.
Can you stamp a custom WLL on the hook?
Yes. Custom tonnage stamping is available for orders. The marking will be stamped on the body for traceability.
How are the hooks packed for export?
Packed in cartons on pallets. We can configure the carton count and pallet pattern to match your warehouse or retail packing requirements.
Need A Quote On 8 Inch Clevis Short J Tow Hook
Send the sizes, the finish and the quantity on WhatsApp or by email. You get a priced reply within 24 hours and a straight answer on stock.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.