Exploring China Top Quality Rigging Supplies Sling Hook

G80 clevis sling hooks are designed for heavy-duty lifting with chain slings, where strength, safety and traceability matter. This guide explains what the grade means, how to read the markings, and how to select the right hook for a rated assembly without mismatching components.

What a G80 Clevis Sling Hook Actually Is

A G80 clevis sling hook is a forged alloy steel lifting component designed to connect chain slings to loads or lifting points. The 'G80' designation refers to the material grade, which defines the minimum tensile strength and yield strength of the steel used. These hooks are not for general tie-down or transport use. They are rated for overhead lifting with chain slings and must be used as part of a complete, matched assembly. The clevis shape allows the chain to be inserted and secured, and the latch prevents accidental disengagement during lifting. The hook is proof load tested and marked with WLL, grade, size and manufacturer details.

Where G80 Clevis Sling Hooks Belong

G80 clevis sling hooks are used in overhead lifting operations where high strength and reliability are required. Typical applications include construction crane lifts, industrial machinery installation, steel fabrication, offshore platform assembly, and heavy equipment handling. They are not suitable for vehicle tie-downs or general cargo securement. The grade is commonly specified in projects involving structural steel, large castings, or heavy machinery. Buyers in manufacturing, infrastructure and marine sectors rely on G80 for its strength and traceability. The latch version is preferred where load movement or vibration is expected during lift.

1T Endless Webbing Sling/Endless Polyester lifting slings

The Meaning Behind the Grade and Markings

The 'G80' marking indicates the hook is made from alloy steel with a minimum tensile strength of 800 MPa. This is a standard grade used in overhead lifting hardware. The marking is stamped on the hook body and includes the working load limit, size, grade and manufacturer. The WLL is based on a 4:1 design factor, which is standard for rigging hardware unless otherwise stated. The dimensions listed (A, B, E, D, H, L) define the physical fit with the chain and the lifting point. The weight per piece is provided for logistics and handling planning. Always verify the stamp matches the chain size and WLL before use.

1T Endless Webbing Sling/Endless Polyester lifting slings

Size Range and Capacity Options

G80 clevis sling hooks are available in sizes from 6-8 to 32-8, corresponding to chain diameters from 6 mm to 32 mm. The working load limit ranges from 1.12 tons to 31.5 tons, with breaking load from 4.48 to 126 tons. The size designation (e.g. 6-8) refers to the chain size in millimeters and the hook's internal diameter in inches. The weight per piece increases with size, from 0.32 kg to 27 kg. These sizes cover most industrial lifting needs, from small machinery to large structural components. Match the hook size to the chain diameter and ensure the WLL exceeds the expected load.

2T Endless Webbing Sling/Endless Polyester lifting slings

Compliance and Traceability Requirements

Each G80 clevis sling hook is proof load tested and has its WLL, grade and size stamped on the body. Material Test Certificates to EN 10204 3.1 are supplied with orders. The standard 4:1 design factor applies unless a product states otherwise. The hook must be used with chain of the same grade and size to maintain the assembly rating. Mixing grades or sizes reduces the system's strength to the weakest component. The latch is designed to stay closed under load but must be checked before each use. If the latch is damaged or does not close fully, the hook must not be used.

2T Endless Webbing Sling/Endless Polyester lifting slings

How to Select the Right Hook for Your Assembly

Start by identifying the chain size and the expected load. Then select a G80 clevis sling hook with a WLL higher than the maximum load. Confirm the hook size matches the chain diameter. Check that the latch operates smoothly and the hook body is free of cracks or deformation. Do not use a hook if the stamp is missing or illegible. If your project requires compliance with a standard like EN 1492-1 or ASME B30.26, ensure the hook is manufactured to that specification. For multi-part assemblies, source the hook, chain and binder from one supplier to avoid mismatched grades.

2T Endless Webbing Sling/Endless Polyester lifting slings

How to Handle and Store the Hooks

Store G80 clevis sling hooks in a dry, clean area away from corrosive materials. Avoid stacking them in a way that could damage the latch or body. Use protective caps if not in use. Inspect each hook before every lift for wear, deformation, or damage to the latch. Never use a hook with a bent or cracked body, a worn latch, or a missing stamp. If the hook is used in a marine or high-moisture environment, consider a zinc-plated or powder-coated finish for corrosion resistance. Always follow the manufacturer's handling instructions and do not exceed the WLL.

3T Endless Webbing Sling/Endless Polyester lifting slings

Why One Supplier for the Whole Assembly Matters

Buying the hook, chain and binder from one supplier ensures all components are rated to the same grade and are compatible. Mismatched components can reduce the entire assembly's strength to the weakest part. For example, a G80 hook on a Grade 43 chain is a Grade 43 assembly. When we quote a lifting system, we confirm the grade, size and WLL of each part together. We proof test the assembly and mark it so the user knows the full rating. This eliminates confusion and reduces the risk of on-site failure.

3T Endless Webbing Sling/Endless Polyester lifting slings