Chain hoist
Chain Hoist
Hand chain hoist designed in accordance with EN 13157 and the CE regulations, with a capacity range from 0.5 t to 30 t...
EN 13157
Manual Lifting Equipment
Chain hoists, lever hoists, plain and geared trolleys, permanent lifting magnets, wire rope pulling hoists and snatch blocks for lifting without a power supply.
Lever hoist
Lever Hoist
Heavy duty lever hoist block with 1.5 m load chain, designed in accordance with EN 13157 and the CE regulations, for l...
Permanent lifting magnet
Permanent Lifting Magnet CSmag
Permanent lifting magnet type CSmag for the transport of small to medium loads in flat and round material, activated b...
Plain trolley
Plain Trolley
Push type plain trolley for suspending a hoist under an I beam, with lifetime lubricated sealed ball bearings, contour...
Geared trolley
Geared Trolley
Heavy duty geared trolley moved by a hand chain through a gear train, for controlled positioning of a suspended load o...
Pulling hoist
Aluminium Housing Wire Rope Pulling Hoist
HX model aluminium housing pulling hoist, a small and compact hand operated lifting and pulling tool supplied complete...
Snatch block
Heavy Duty Snatch Pulley Block
LH type heavy duty single sheave snatch pulley block with rated loads from 2 MT to 50 MT, safety factor 4, tested at 2...
Single and double sheave snatch block DY
DY Type Single And Double Sheave Snatch Block
DY type snatch block with CE and GS certification, available with a single or double sheave, an alloy steel shell and ...
Who This Range Suits
The Customers And Problems Behind This Category
Who Buys This Range
- Civil contractors working on slopes and in rough terrain
- Distributors of manual lifting equipment
- Distributors of rigging hardware
- Distributors serving European markets that ask for GS
- Distributors stocking manual lifting equipment
- Distributors supplying manual pulling equipment
- Distributors supplying workshop lifting equipment
- Fabricators and steel service centres handling plate all day
Problems It Solves
- There is no power supply at the lifting point
- Overload is only discovered when something breaks
- Brake failure means a dropped load
- Load chain quality varies between suppliers
- There is no headroom for a hand chain hoist
- Structures need pulling into line, not lifting
Core Advantages
What Sets This Range Apart
Lifts Where There Is No Power
A hand chain hoist needs no supply, no cable and no charging, so it works on remote sites, in tanks and inside structures.
Warns Before It Fails
Drop forged hooks are designed to bend slowly under excessive overload, giving a visible warning long before the hoist reaches a failure point.
Redundant Braking
A double pawl with springs provides redundancy in the operation of the brake mechanism, so the load is held even if one pawl is disturbed.
Built To EN 13157 And CE
The design accords with EN 13157 and the CE regulations, which is what European buyers are asked to prove.
Works At Any Angle
The lever can be operated horizontally, vertically or overhead, so one tool covers lifting, pulling and tensioning.
Short Handle, High Force
The ratchet lever multiplies a modest hand effort into tonnes of pull without a power source.
Redundant Brake
A double pawl with springs gives redundancy in the brake mechanism, so the load is held reliably.
Compact Where Headroom Is Tight
With no hand chain to hang, the lever hoist fits where a chain hoist cannot.
Application Scenarios
Where This Category Is Used
- Cable and line pulling
- Cable pulling and stringing
- Crane and derrick reeving
- Foundry, forge and heat treatment bays
- General site rigging and pulling
- High level runway beams in workshops and plants
- Loading and unloading of laser and plasma tables
- Loading bays and packing halls
- Long monorail runs where a push travel is impractical
Industry
Construction And Infrastructure
Bridge decks, steel trusses, precast segments and site plant all have to be lifted with equipment that arrives certified...
IndustrySteel And Metal Handling
Plate, bar, coil and billet are handled dozens of times a day, so the handling method decides both the labour cost and t...
IndustryMarine And Outdoor
Saltwater and weather decide the material long before the load does, which is why this section is built around stainless...
IndustryMunicipal Landscaping And Tree Care
Street trees, transplanted stock and stormwater season give municipal teams a lifting and tensioning problem that ordina...
Related Project Cases
Project Case
Guozigou Bridge Cable Stayed Bridge Xinjiang
Guozigou Bridge is a cable stayed bridge in the Xinjiang Uygur Autonomous Region of China, located on the Guozigou gorge. It is on...
Project Case
FAST Five Hundred Metre Aperture Spherical Telescope
The Five hundred metre Aperture Spherical Telescope, known as FAST, is built into a natural karst depression in Guizhou province, ...
Knowledge
Guides Related To This Category
2T Carl Stahl chain hoist FZ type is good assistant of lifting
2T Carl Stahl chain hoist FZ type can smoothly lifting,convenient repair or replace the spare parts,made in high strength alloy st
Best lifting tool -Carlstahl FZ chain hoist
Carlstahl FZ chain hoist is best lifting tool,offers durable and high quality, manufactured according to EN13157 standard and CE r
CSmag magnet price increase because the price of rare earth raise highly
CSmag magnet price incease because price of rare earth raise highly and quickly, and robust demand.
CSmag Magnetic lifter can lift steel without electricity
CSmag Magnetic lifter is made of neodymium magnet, can lift tons of steel without electricity.
How to inspect magnetic lifter 1 ton before using?
How to inspect magnetic lifter 1 ton?1. You must observe the working environment.3. The weight and size of loads should be in the
How to proper use Permanent lifting magnet CSmag?
There are 11 steps to proper use Permanent lifting magnet CSmag, consider the total weight,max carrying capacity and min thickness
FAQ
Manual Lifting Equipment FAQ
How many products are in the manual lifting equipment range?
There are 8 products in this category on this site, and sizes within each product are made to the order. Send your requirement to [email protected] and we will confirm what suits it.
Which standard applies to this range?
EN 13157. The standard is stated on every product page along with the marking and the certificates that ship with the goods.
Can these products carry our own brand?
Yes. OEM branding, custom label layouts and printed markings are standard options across the programme.
Can this category be shipped with other products in one container?
Yes. We hold a logistics warehouse in Ningbo so goods from different factories are consolidated and loaded together.
Next Step
Send Your Sizes And Quantities
We build to the order rather than selling fixed steps, so the fastest route to a price is the working load limits, the lengths and the quantities you need.