Organic Peroxides and Fine Chemicals Direct From Shandong
Dakings Chemical produces cumyl hydroperoxide and dicumyl peroxide at its own Jinshan base and distributes 25 documented fine chemicals — alcohols, aldehydes, esters, halogenated hydrocarbons and TDAE rubber oil — with CAS, full quality index and DG-compliant packing agreed before the order.
Five Chemical Families Under One Supplier Code
Dakings produces organic peroxides at its own Jinshan base and distributes alcohols, aldehydes, esters, halogenated hydrocarbons, plasticizer feedstock and TDAE rubber oil through a fine chemical trading platform built on Sinopec and local producer resources.
Documented Products With CAS Quality Index and Packing
Every product below ships with its own quality index. Nothing is described as high quality without the number that proves it.
Cumyl Hydroperoxide DKS L-80
CAS 80-15-9 · C9H12O2
Cumyl hydroperoxide DKS L-80 is the 80-85% content grade of the initiator used to start olefin polymerisation and copolymerisation.
View specification →
Cumyl Hydroperoxide DKS L-90
CAS 80-15-9 · C9H12O2
Cumyl hydroperoxide DKS L-90 is the high content grade, supplied at 88±1% with 9.14-9.46% actual active oxygen.
View specification →
Dicumyl Peroxide
CAS 80-43-3 · C18H22O2
Dicumyl peroxide is the rubber vulcanising agent and polyolefin crosslinker of the range, a white crystalline solid above 99% purity with a melting...
View specification →
A1426 TDAE Rubber Plasticizer Aromatic Base Mineral Oil
CAS TBC · Treated Distillate Aromatic Extract
A1426 is the lighter of our two TDAE grades, a treated distillate aromatic extract engineered as the environmentally friendly replacement for...
View specification →
A1820 TDAE Rubber Plasticizer Aromatic Base Mineral Oil
CAS TBC · Treated Distillate Aromatic Extract
A1820 is the heavier, more aromatic of our two TDAE grades, refined as the eco-friendly replacement for traditional high-PAH aromatic oils.
View specification →
Phthalic Anhydride
CAS 85-44-9 · C8H4O3
Phthalic anhydride is the anhydride half of the phthalate plasticizer pair, supplied at 99.5% minimum purity with a crystallisation point of 130.0 °C...
View specification →
2-Ethylhexyl Alcohol
CAS 104-76-7 · C8H18O
2-Ethylhexyl alcohol, also called octanol or 2-EH, is the C8 alcohol that esterifies with phthalic anhydride and with aliphatic diacids into the...
View specification →
1-Bromopropane
CAS 106-94-5 · C3H7Br
1-Bromopropane is the straight-chain propyl bromide used as a Grignard raw material, as an alkylating agent for aromatic compounds and as a named...
View specification →
2-Bromopropane
CAS 75-26-3 · C3H7Br
2-Bromopropane is the isopropyl bromide of the pair, used for organic synthesis and as a pesticide and pharmaceutical intermediate.
View specification →
1-Chlorobutane
CAS 109-69-3 · C4H9Cl
1-Chlorobutane is the n-butyl chloride used for organic synthesis, as a solvent, as an intermediate and as an animal repellent.
View specification →
2-Chlorobutane
CAS 78-86-4 · C4H9Cl
2-Chlorobutane is the secondary butyl chloride used as an organic synthesis intermediate and solvent, applied in medicines, plasticizers, pesticides,...
View specification →
1,4-Dichlorobutane
CAS 110-56-5 · C4H8Cl2
1,4-Dichlorobutane is the difunctional four-carbon building block used as raw material and solvent for organic synthesis, including adiponitrile and...
View specification →
Dibromoneopentyl Glycol
CAS 3296-90-0 · C5H10Br2O2
Dibromoneopentyl glycol is a reactive flame retardant for unsaturated polyester, thermoplastic and polyurethane resins and for rigid polyurethane foam.
View specification →
1-Propanol
CAS 71-23-8 · C3H8O
1-Propanol is the main raw material for n-propyl acetate, the green food printing ink solvent, and for n-propylamine, di-n-propylamine, bromopropane...
View specification →
2-Propanol
CAS 67-63-0 · C3H8O
2-Propanol, isopropyl alcohol, is made from propylene and is used as an industrial and coating solvent, as a component in cleaning, car care and...
View specification →
Propyl Acetate
CAS 109-60-4 · C5H10O2
Propyl acetate is a coating and ink solvent, a drug extractant and a fragrance solvent, and industrially it is used as an azeotrope for acetic acid...
View specification →Five Industries That Buy on Specification Not on Adjectives
Tire and Rubber Compounding
Process Oil and Crosslinker for PCR TBR and Industrial Rubber Goods
Coatings Inks and Printing
Solvent Selection for Bake Coatings Flexo Inks and Coil Lines
Plastics Polymers and Flame Retardancy
Initiators Crosslinkers Plasticizer Feedstock and a Reactive Flame Retardant
Pharmaceutical and Agrochemical Intermediates
Named Intermediates for API and Crop Protection Routes
Flavours Fragrances and Food Additives
Aroma Chemicals and Food Grade Esters With Stated Isomer Ratios
Six Buying Problems We Were Built Around
Active oxygen that drifts between lots
Our peroxides are produced in our own plant and the active oxygen band, SADT and half-life temperature are published per grade, not summarised as a single number.
PAH compliance you cannot evidence
Both TDAE grades carry a measured sum of eight polycyclic aromatic hydrocarbons per lot — 0.97 and 2.76 mg/kg against a 10 mg/kg ceiling.
Water in a moisture sensitive intermediate
1-Bromopropane is specified at 300 ppm maximum by Karl Fischer, because a Grignard batch is lost long before a percentage figure would show it.
Two suppliers for one reaction
Phthalic anhydride and 2-ethylhexyl alcohol come from the same company on one offer and one shipping window.
Restricted solvents designed out of the formulation
Dibasic ester replaces isophorone, glycol ethers and cyclohexanone in bake coatings and biodegrades.
A quality index that arrives after the container does
Ask for the SDS and COA before the order and we send the current batch documents so your QA reviews them first.
A Producer a Warehouse and a Trading Platform in One Company
- Organic peroxides are produced at our own Jinshan base in Linzi District, Zibo, not bought on the spot market
- Installation of the expanded Jinshan plant completed on 17 October after nearly two years of construction, doubling capacity
- Distribution, warehousing, logistics and fine chemical R&D sit inside the same company
- The trading platform draws on the resources of Sinopec and local chemical enterprises
- Every product page publishes CAS number, quality index, packing and storage rules before you ask
- SDS and COA are available on request before the order is confirmed
Production Loading and Export Packing
How the Material Actually Reaches Your Plant
Supply From Our Own Production Base
Peroxide Made in Jinshan Not Bought on the Spot Market
Read more →
How we supplyDangerous Goods Packing and Export
From Drum Choice to Bonded Port Handover
Read more →
How we supplySourcing and Distribution Platform
One Supplier Code Across Five Chemical Families
Read more →
Market Notes and Process Guides From Our Own Range
Dakings Completes the Jinshan Peroxide Plant Expansion
Installation of the factory and equipment at the Jinshan base for CHP and DCP production completed on 17 October, with capacity set to double once the expanded plant is in operation.
Read article →
Analysis Report on the n-Pentanol Market
n-Pentanol production is technology intensive with high technical thresholds, and only a few companies worldwide hold large-scale capacity.
Read article →
Where the Pentanol Mixture Is Actually Used
A multifunctional solvent used across coatings, inks, pigments, cleaning agents, flavours and organic synthesis, with a documented isomer split.
Read article →
Production Methods and Main Applications of Propionaldehyde
Low-pressure oxo synthesis became the dominant propionaldehyde route from the 1970s and today accounts for the overwhelming share of capacity.
Read article →Questions Buyers Ask Before the First Order
What does Dakings Chemical actually do?
Dakings Chemical (Shandong) Co., Ltd. runs a fine chemical trading platform built on the resources of Sinopec and local chemical enterprises, and produces organic peroxides at its own Jinshan base. The company integrates domestic and international chemical raw material distribution, warehousing and logistics, and fine chemical R&D.
Which products do you manufacture rather than distribute?
The organic peroxides — cumene hydroperoxide and dicumyl peroxide — are produced at our Jinshan base in Linzi District, Zibo City. The other four families are supplied through the distribution platform.
How many products do you list and can I see the specifications?
Twenty-five products across five families, and every one has its own page with CAS number, quality index, packing and storage rules. Nothing is hidden behind an enquiry form.
Do you supply SDS and COA before shipment?
Yes. SDS and COA are available for the products in the range. Ask on WhatsApp or by email and we send the current batch documents so your QA and EHS teams can review them before the order.
Where do you ship from and how?
The company address is Moscow Road, Qingdao Qianwan Bonded Port Area in the Shandong Pilot Free Trade Zone, with the production base at Jinshan Industrial Park, Zibo. Packing options run from 25 kg bags and drums through IBC, ISO tank, flexitank and tank truck depending on the product.
How quickly do you reply to an inquiry?
Our commitment is a response within 24 hours. WhatsApp is normally the fastest channel.
Send Us the CAS Number and the Tonnage
Tell us what you need and the volume. We reply within 24 hours with the quality index, the packing option and a price.