All Injection Moulds And Moulded Parts
Every one of the 38 records in the XSY Mould catalogue, grouped by category. Nothing is paginated and nothing is left out.
Moulds For Sanitary Ware Parts
Injection moulds for shower heads, shower bodies, cisterns, seats and cover plates in ABS and PP
Moulds For Sanitary Ware Parts
ABS Sanitary Part Mould With S136 Cavity Steel
Stainless quenched cavity for a plated bathroom part
Product materials ABSMould material S136 quenching
Moulds For Sanitary Ware Parts
PP Cover Plate Mould With NAK80 Cavity Steel
Pre-hardened NAK80 on a large flat polypropylene part
Product materials PPMould material DAIDO NAK80
Moulds For Sanitary Ware Parts
ABS Sanitary Part Mould With Three Slides
Three independent pull directions on one impression
Product materials ABSMould material DAIDO S-Star quenching
Moulds For Sanitary Ware Parts
ABS Shower Head Mould With Two Cavities And Six Slides
The most complex tool in the archived catalogue
Product materials ABSMould material DAIDO NAK80
Moulds For Sanitary Ware Parts
PP Cover Plate Family Mould
Two different parts out of the same shot
Product materials PPMould material DAIDO NAK80
Moulds For Sanitary Ware Parts
ABS Sanitary Part Mould With Two Cavities And Four Slides
The highest output sanitary tool in the archive
Product materials ABSMould material S136 quenching
Moulds For Sanitary Ware Parts
ABS Sanitary Part Mould With Submarine Gate
The simplest tool here, and the cheapest to keep running
Product materials ABSCavity 1 x 1
Moulds For Sanitary Ware Parts
ABS Shower Body Mould With S136 Cavity Steel
A heavy section part cooled for what it actually is
Product materials ABSMould material S136 quenching
Moulds For Sanitary Ware Parts
Bush Mould
A small round part moulded on a replaceable core
Moulds For Sanitary Ware Parts
Rotor Mould
Vane geometry cut by EDM rather than milled
Moulds For Automotive Interior Parts
Injection moulds for support brackets, door panel parts and tray tables in PC ABS and engineering blends
Moulds For Automotive Interior Parts
PC ABS Automotive Part Mould With SKD61 Cavity Steel
SKD61 for the melt temperature and abrasion of PC ABS
Product materials PC/ABSMould material SKD61
Moulds For Automotive Interior Parts
Support Bracket Mould
A load carrying part where the weld line position matters
Moulds For Automotive Interior Parts
Car Door Panel Mould
A large flat tool where cooling decides flatness
Moulds For Automotive Interior Parts
Tray Table Mould
A wide part that has to stay flat under load and heat
Moulds For Home Appliance Parts
Injection moulds for appliance housings, control panels and trim parts in PC and PC blends
Moulds For Electronic And Audiovisual Parts
Injection moulds for television front shells, enclosures and electronic housings in PC and PC ABS
Moulds For Electronic And Audiovisual Parts
ABS Electronic Part Mould With Two Cavities And Six Slides
Six slides across two impressions on a 60 second cycle
Product materials ABSMould material NAK80
Moulds For Electronic And Audiovisual Parts
PC Electronic Part Mould With S136 Cavity Steel
No slides at all, which keeps flash risk near zero
Product materials PCMould material S136
Moulds For Electronic And Audiovisual Parts
PC Electronic Series Mould With SKD61 Cavity Steel
SKD61 with a pinpoint gate for a cosmetic PC part
Product materials PCMould material SKD61
Moulds For Electronic And Audiovisual Parts
Hot Runner Mould With Valve Gate
The only hot runner tool in the archived catalogue
Product materials PC/ABSMould material SKD61
Moulds For Other Product Series
Injection moulds that sit outside the sanitary, automotive, appliance and electronics groups
Moulds For Other Product Series
ABS Injection Mould With 718 Cavity Steel
718 pre-hardened steel where stainless is not needed
Product materials ABSMould material 718
Moulds For Other Product Series
ASA Family Mould On LKM Base
A 4+1 family layout matched to a real four to one part ratio
Product materials ASAMould material LKM
Moulds For Other Product Series
Custom Plastic Injection Moulds
Three archived records that carry a name and nothing else
Mould Components And Inserts
Machined cavity inserts, core pins, slides and mould base components made in the same tool room
Plastic Injection Moulded Parts
Finished moulded parts produced on our own presses, from shower fittings to television front shells
Plastic Injection Moulded Parts
Moulded Shower Heads
Finished shower heads off our own presses
Plastic Injection Moulded Parts
Moulded Hand Showers
Three archived hand shower records, moulded as a family
Plastic Injection Moulded Parts
Hand Shower And Shower Head Sets
Matched sets moulded and packed together
Plastic Injection Moulded Parts
Moulded Shower Components
The smaller fittings that go around a shower
Plastic Injection Moulded Parts
Moulded Shower Fittings
The fittings group from the 2017 injection parts catalogue
Plastic Injection Moulded Parts
Moulded Toilet Cistern
A large thin wall part that has to stay watertight
Plastic Injection Moulded Parts
Moulded Toilet Cover Plate
A flat cosmetic part where flatness is the whole specification
Plastic Injection Moulded Parts
Moulded Toilet Lid
A hinged part that has to match the seat it sits on
Plastic Injection Moulded Parts
Moulded Sanitary Ware Parts
The general sanitary parts group from the archived catalogue
Plastic Injection Moulded Parts
Contract Moulded Plastic Parts
Four archived records that all describe general moulding work
Plastic Injection Moulded Parts
Moulded Television Front Shells
A wide gloss black part where every defect is visible
Plastic Injection Moulded Parts
Moulded Appliance Control Panels
Cosmetic face and functional cut outs on the same moulding
Plastic Injection Moulded Parts
Moulded Mirror Housings
A housing that frames a reflective surface
About This Catalogue
What the product records do and do not tell you.
Why do some products have no specification table?
Because the company catalogue record for those products gives a name and a category and nothing more. Rather than fill a table with plausible numbers we leave it out and say so on the page.
Are these the only parts you can make?
No. This is the recorded catalogue, not the limit of the tool room. If your part is similar in size and material to anything here, send it and we will quote it.
Can I order a single mould?
Yes. The minimum order recorded on every product in this catalogue is one set.
Cannot Find Your Part Here
Most of what we build is not in a catalogue. Send the model and the moulding grade and we will tell you what the tool looks like.