Stainless Steel Pipe Fittings
Hose Clamp
Stainless worm drive hose clamps for flexible connections.
View specifications →Stainless Steel Pipe Fittings
Pipe Clamp
The parts that hold the line where it should be, so joints are not carrying the weight of the pipework.
Overview
What This Pump Does
Stainless steel pipe clamps support tube and pipe runs against structure and equipment. They are supplied alongside the fittings so a line and its supports arrive together.
Correct support matters more than it looks: unsupported pipework loads joints, distorts clamp connections and is a common cause of leaks that get blamed on gaskets.
| Item type | Pipe clamp |
|---|---|
| Material | Stainless steel |
| Sizing | By tube or pipe outside diameter |
| Use | Supporting pipework against structure and equipment |
| Quantities | Single items or project lots |
Key Benefits
Why Supports Belong In The Same Order
Protects The Joints
Supported pipework keeps weight and movement off clamp and welded joints.
Stainless Construction
Matched to the pipework so the support does not corrode before the line does.
Ordered With The Fittings
Fittings and supports from one source means the installation is not waiting on a hardware order.
Sizes To Suit The Line
Clamps specified against the tube or pipe outside diameter.
Application Scenarios
Where It Is Installed
Process Line Support
Holding runs along walls, frames and ceilings.
Skid Fabrication
Securing pipework to a skid frame during fabrication.
Equipment Connections
Supporting pipework either side of a pump or valve so the joint is not loaded.
Who It Is For
- Piping contractors
- Skid fabricators
- Maintenance teams
- Plant engineers fixing recurring joint leaks
Problems It Solves
Joints leak because the pipe is unsupported
Supporting the run removes the load that distorts a clamp joint and makes it weep.
Vibration loosens connections
Correctly placed clamps reduce movement that works joints loose over time.
Supports arrive after the pipework
Ordering supports with the fittings avoids the delay that leaves a line temporarily strapped up.
Technical Features
How It Is Built
- Stainless steel pipe clamps
- Sized against tube or pipe outside diameter
- For support against structure, frames and equipment
- Supplied with the pipe fitting range
- Industrial and process line duty
- Available in small or project quantities
Specifications
Technical Data
Clamps are sized on outside diameter. Send the pipe or tube size and the mounting arrangement.
| Item type | Pipe clamp |
|---|---|
| Material | Stainless steel |
| Sizing | By tube or pipe outside diameter |
| Use | Supporting pipework against structure and equipment |
| Quantities | Single items or project lots |
Materials And Process
What Goes Into Every Unit
Materials
- Stainless steel clamps and fixings
Manufacturing And Assembly
- Forming and machining
- Finishing
- Dimensional check
- Packing with the fitting order
Quality Control
- Dimensional check against the pipe size
- Finish inspection
- Packed with the order documentation
Customization Options
- Size range for the pipework
- Mounting arrangement
- Quantity
- Material finish
Compared With Other Options
| Hose clamp | A hose clamp secures flexible hose to a fitting. A pipe clamp supports rigid pipework. |
|---|---|
| Improvised supports | Strapping and timber packing shift over time and load the joints they were meant to protect. |
Use Guide
Supporting Pipework Properly
Support Near Equipment
Place supports either side of pumps and valves so the joint is never carrying the pipe.
Allow For Movement
Hot lines expand. Supports should guide the movement rather than fight it.
Match Materials
Use stainless supports on stainless pipework to avoid contact corrosion.
Check After Commissioning
Retighten and inspect supports after the line has been through its first hot and cold cycles.
Answers
Pipe Clamp FAQ
How are clamps sized?
By the outside diameter of the tube or pipe. Send the size and the mounting arrangement.
What material are they?
Stainless steel, so the support matches the pipework.
Can they be ordered with fittings?
Yes, supports are quoted and shipped with the fitting order.
Are they suitable for hygienic lines?
They support the pipework rather than contact the product. Tell us the environment and we will confirm the finish.
Is there a minimum order?
No, small quantities are quoted the same way as project lots.
Related Equipment
Related Equipment From The Same Line
Other pipework components from the same range.
Stainless Steel Pipe Fittings
Stainless Steel Elbow
Butt weld industrial elbows in 316 and 316L.
View specifications →
Stainless Steel Pipe Fittings
Stainless Steel Tee
Butt weld industrial tees in 316 and 316L.
View specifications →
Stainless Steel Pipe Fittings
Stainless Steel Flanges
Stainless flanges for industrial pipework connections.
View specifications →Keep Reading
Industries Guides And Solutions
Need Pipe Clamp Sized For Your Duty Point
Send the pipe sizes and quantities with your fitting list and the supports are quoted with them.