Sanitary Valves And Fittings

Clamp Elbow

Name: Clamp Elbow
Brand: SEKO Pump Solution

Clamp ended elbows that turn the line without leaving a joint you cannot open.

Sanitary clamp elbow SK-EB006 at 45 degrees

Overview

What This Pump Does

Sanitary clamp elbows in SS304 or SS316L, models SK-EB003, SK-EB004 and SK-EB006, covering 45 and 90 degree turns in the DN15 to DN200 range.

Standards are DIN, SMS, 3A, ISO and IDF, with mirror polish to Ra below 0.5 um or matt polish, for dairy, beer, food, beverage, pharmacy and biotechnology lines at temperatures from minus 5 to 95 degrees Celsius.

Standard	DIN, SMS, 3A, ISO, IDF
Connection Type	Weld, Clamp, Thread
Polish	Mirror Polish Ra<0.5um or Matt Polish
Application	Dairy, beer, food, beverage, pharmacy, biotechnology, etc

Key Benefits

Why Clamp Ends On A Fitting

Removable For Inspection

A clamp ended elbow can be taken out for swabbing or replacement without cutting the line.

Smooth Bore Through The Turn

Polished internal surfaces and correct radius keep flow clean through the bend.

Line Reconfiguration

Layouts can be changed for a new product without welding.

Material To Match

SS304 or SS316L so the whole line stays in one grade.

Application Scenarios

Where It Is Installed

Tank To Pump Runs

Turning the line from vessel outlet to pump suction without a long sweep.

Skid Pipework

Compact routing on process and CIP skids where the line is opened regularly.

Filling Line Connections

Short runs that change between product formats.

Who It Is For

Process line fabricators
Breweries and dairies
Pharmaceutical installers
Maintenance teams carrying spare fittings

Problems It Solves

Welded bends cannot be inspected

Clamp ends allow the fitting to be removed for swabbing during an audit.

Standards do not match

Elbows supplied in the same standard as the clamps and ferrules avoid a step in the bore.

Layout changes cost welding time

Clamp connections make a re-route a matter of hours, not days.

Technical Features

How It Is Built

Models SK-EB003, SK-EB004 and SK-EB006
45 and 90 degree elbows
SS304 or SS316L, AISI 304 and AISI 316L material
Size DN15 to DN200
Standards DIN, SMS, 3A, ISO, IDF
Mirror polish Ra below 0.5 um or matt polish

Sanitary clamp elbow SK-EB003 at 90 degrees

Sanitary elbow SK-EB004 with clamp and threaded ends

Specifications

Technical Data

Published fitting data. Confirm the standard by measuring an existing ferrule before ordering.

Standard	DIN, SMS, 3A, ISO, IDF
Connection Type	Weld, Clamp, Thread
Polish	Mirror Polish Ra<0.5um or Matt Polish
Application	Dairy, beer, food, beverage, pharmacy, biotechnology, etc

Materials And Process

What Goes Into Every Unit

Materials

SS304 or SS316L
Mirror or matt polished surfaces
Gaskets specified separately for the joints

Manufacturing And Assembly

Tube forming and bending
Ferrule welding
Polishing to specification
Dimensional check and packing

Quality Control

Dimensional check against the standard
Surface finish verified
Documentation supplied with the order

Customization Options

45 or 90 degree
Clamp, weld or threaded ends
SS304 or SS316L
Mirror or matt polish

Compared With Other Options

Welded elbow	A welded elbow is permanent. A clamp elbow can be removed for inspection or a layout change.
Industrial butt weld elbow	Industrial elbows follow piping standards and are not polished for hygienic duty.

Use Guide