Steam Sterilizer
Novo Pro 12L
The Novo Pro 12L is a Class B steam sterilizer designed for small to mid-size clinics that need reliable, auto.
Novo Pro 8L Steam Sterilizer
The Novo Pro 8L is a Class B steam sterilizer for clinics and studios that need to reprocess instruments quickly between appointments.
Overview
What The Novo Pro 8L Is For
The Novo Pro 8L is a Class B steam sterilizer for clinics and studios that need to reprocess instruments quickly between appointments. An 8 L chamber takes up to five trays, fractionated vacuum removes air from wrapped and hollow loads, and cycle data is logged to SD card. It runs on single-phase 220-240 V and occupies 685 x 438 x 405 mm.
60+Countries with users
8Patented technologies
1800Days of aging test
24Months warranty
Key Benefits
Why Clinics Choose The Novo Pro 8L
Class B fractionated vacuum sterilizes wrapped instruments and hollow handpieces
Five trays per load reduce the number of cycles needed between patients
Cycle data is traceable on SD card, supporting compliance without manual logging
Preheating with standby reduces cycle time by maintaining chamber temperature
The intelligent diagnosis system identifies the failing section and displays the fault message
Double door locking prevents cycles from starting on an unlocked door
Application Scenarios
- Turning around handpieces and instruments in a one to three chair dental practice
- Sterilizing wrapped surgical kits for immediate use
- Reprocessing hollow instruments where air would prevent steam penetration
- Running an end of day cycle of pouched instruments with extra drying
- Providing a stored cycle record for practice inspections
Who It Is For
- Dental clinics and stomatology departments reprocessing instruments on site
- Tattoo and piercing studios needing reliable sterilization
- Small hospitals and outpatient practices without a central sterile services department
- Beauty and aesthetic clinics sterilizing reusable tools
- Medical device distributors needing a documented Class B sterilizer
Problems It Solves
What Goes Wrong Without It
- Unwrapped sterilizers cannot process pouched or hollow loads
- Manual cycle logs are prone to errors and can be lost
- Instruments coming out damp require reprocessing, wasting time and resources
- Cold starts lengthen cycle times when the schedule is busiest
- Maintaining water quality requires frequent monitoring and cleaning
Technical
Technical Features And Specifications
- Class B fractionated vacuum cycles conforming to EN 13060
- 260 x 142 mm cooling area with 73 aluminium radiating layers and 18 radiating pipes
- Quick coupling connections for filling and draining
- Intelligent monitoring and diagnosis system with fault message display
- Traceability to SD card
- Bacteriological filter retaining not less than 99.5 percent of particles above 0.3 micrometres
- Double safety door locking with mechanical, sensor and electromagnetic locks
- Water tank group is accessible for cleaning and inspection
- Optional automatic water filling system
| Cycle Type | Class B, fractionated vacuum |
|---|---|
| Chamber Volume | 8 L |
| Chamber Dimensions | 245 mm x D445 mm |
| Usable chamber volume | 198 mm x 204mm x 385mm |
| Overall Size (L x W x H) | 685x438x405mm |
| Weight | 60kg |
| Electrical Supply | 220-240 VAC-50/60Hz, single-phase |
| Nominal voltage | 220V, 50Hz |
| Max current | 10A |
| Max. altitude | 2000 asl |
| Max Working Pressure | 2.5 Bar(250 kPa) |
| Min Working Pressure | -0.9 Bar(-90 kpa) |
| Max Temperature | <145 C |
| Clean water tank | 3.5L |
| Sewage tank | 1.7L |
| Water Quality | EC(conductivity<15uS/cm) |
| Average water consumption | 0.17L(Min) 0.31L(Max) |
| Bacteriological filter | The filtration efficiency of particles above 0.3um be no less than 99.5% |
| Conformity | 93/42/EEC, EN 13060, IEC 61010-1, IEC 61010-2-040, EN 61326 |
Materials
- Stainless steel sterilization chamber
- Steel wire tray carrier
- Aluminium instrument trays
- Aluminium finned heat exchanger
How It Is Used In The Workflow
- Load preparation - instruments are cleaned and dried before wrapping
- Wrapping - pouches or reels are sealed with the cycle date visible
- Water supply - the tank is filled with distilled water below 15 microsiemens per cm
- Cycle selection - the operator picks one of the 11 programs and tests
- Fractionated vacuum - repeated vacuum and steam pulses remove air
- Sterilization and drying - the cycle holds temperature, then dries
- Record - the cycle is written to SD card
Quality Control
- Vacuum and pressure limits are monitored on every cycle
- Programs include routine tests for daily verification
- The diagnosis system identifies the failing section
- Each unit is aged tested before shipment
- Cycle data is retained on removable media
Certifications And Conformity
- EN 13060 small steam sterilizer
- IEC 61010-1
- IEC 61010-2-040
Options
Configuration And Customization
Automatic water filling system
Built in thermal printer
Instruments management assistant trays
Multi language operating system
Comparison
How The Novo Pro 8L Compares
| Compared With | What Changes |
|---|---|
| Class N sterilizer | A Class N unit only handles unwrapped solids; the Novo Pro 8L also processes wrapped and hollow loads |
| Novo Pro 23L | The 23 L chamber suits a larger practice and uses more water per cycle; the 8 L is for fewer instruments |
| Central sterile services | Sending instruments out removes the equipment cost but adds transport time and a second set of instruments |
Use Guide
Running The Novo Pro 8L Day To Day
- Fill the clean water tank with distilled water and check the level indicator
- Run the daily test programme before the first load
- Load trays so pouches lie flat and do not touch the chamber wall
- Select the program that matches the load
- Empty the waste water tank when prompted and never return waste water to the clean tank
- Keep the SD card in place so every cycle is recorded
FAQ
Novo Pro 8L Questions
What is the chamber volume
The Novo Pro 8L has an 8 L chamber with dimensions 245 mm x D445 mm.
What water does the sterilizer need
Feed water must have a conductivity below 15 microsiemens per centimetre. Distilled water is recommended.
How many instrument trays fit in one load
The carrier takes up to five trays, or three trays when rotated 90 degrees.
What power supply does it need
The unit requires a 220-240 VAC, 50/60Hz, single-phase power supply with a maximum current of 10A.
What certifications does it have
The Novo Pro 8L conforms to 93/42/EEC, EN 13060, IEC 61010-1, IEC 61010-2-040 and EN 61326.
What is the warranty period
The Novo Pro 8L comes with a 24 month or 2000 cycle warranty, whichever comes first.
What happens if the sterilizer fails
The intelligent diagnosis system identifies the failing section and displays the fault message on screen.
Related Products
Steam Sterilizer
Novo Pro 16L LED
The Novo Pro 16L LED is a Class B steam sterilizer designed for practices needing a compact, reliable reproces.
Steam Sterilizer
Novo Pro 18L LED
The Novo Pro 18L LED is a compact Class B steam sterilizer designed for a small reprocessing area in a dental.
Steam Sterilizer
Novo Pro 18L
The Novo Pro 18L is a Class B steam sterilizer for clinics that need to reprocess instruments quickly between.
Related Reading
Industry
Dentistry
Handpieces, hand instruments, impression trays and surgical kits between patients.
See the applicationIndustryMedical
Reusable instrument sets in clinics without a central sterile services department.
See the applicationBuying GuideClass B Versus Class N Steam Sterilizers
What the cycle class actually changes, and why a practice that wraps instruments or reprocesses handpieces cannot use a Class N machine.
Read the guideBuying GuideChoosing The Right Autoclave Chamber Size
Chamber volume follows the busiest session rather than the number of chairs. How to work out which size in the 8 L to 45 L range fits your practice.
Read the guideDownloadNovo Pro Steam Sterilizer Brochure
PDF brochure for this range
Go to downloadsAsk About The Novo Pro 8L
Send the model name and your country and we will come back with a quote, lead time and the configuration options for the Novo Pro 8L.