Steam Sterilizer
Novo Pro 45L Plus
The Novo Pro 45L Plus is a Class B steam sterilizer built for high-volume reprocessing in clinics and surgical.
Specifying A Sterilization Room For A Dental Practice
The reprocessing room is usually the smallest room in the practice and the one an inspector looks at first. This is how to size the equipment for the chairs you actually run, and lay it out so instruments only travel one way.
Stage By Stage
Decisions In The Order You Have To Make Them
Get the sequence right and the room fits. Get it wrong and you buy a chamber that is too small in year two.
Stage 1
Map The Flow
Problem
Instruments that cross back over their own path undo the whole process.
How Joident Solves It
Lay the bench out one way, dirty intake to sterile storage, and place the four machines in that order.
Stage 2
Size The Chamber
Problem
An undersized chamber creates a queue on exactly the afternoon you cannot afford one.
How Joident Solves It
Size on the busiest session. Joident chambers run from 8 L to 45 L on the same Class B platform.
Stage 3
Plan The Services
Problem
A sterilizer sharing a socket with the compressor trips the circuit.
How Joident Solves It
Novo Pro models run on single phase 200-240 Vac and a 23 L draws 2700 W with a 16 A fuse, so plan a dedicated circuit.
Stage 4
Set Up The Record
Problem
Handwritten logs are the first thing an inspection questions.
How Joident Solves It
Cycle data goes to SD card or USB automatically, with a built in or external printer where a paper copy is expected.
Outcome
What A Well Specified Room Delivers
- Instruments move one way, from dirty intake to sterile storage
- The chamber matches the busiest session rather than the average day
- Cycle records are produced as the machine runs
- Staff training takes a shift, not a month
- The room passes inspection on the evidence it already produces
Equipment In This Solution
FAQ
Setting Up A Dental Sterilization Room Questions
How big a chamber does a four chair practice need
It depends on how many surgical packs you run rather than how many chairs you have. A four chair general practice usually settles on 23 L; a practice doing regular implant surgery moves up to 29 L or 45 L so a full pack fits in one cycle.
Should the ultrasonic cleaner be in the same room
Yes, at the dirty end. The point of a one way layout is that an instrument never crosses back over its own path, so cleaning sits at the intake side and sterile storage at the far end.
Do I need a printer on the autoclave
Not necessarily. Every Novo Pro writes cycle data to SD card or USB, which is usually enough. A built in or external printer is worth adding where local practice is to attach a paper record to the day sheet.
What power supply should I plan for
Novo Pro sterilizers run on single phase 200-240 Vac at 50/60 Hz and draw up to 2700 W, so plan a dedicated circuit with a 16 A protection rather than sharing a socket with the compressor.
Can you help with the layout before we build
Yes. Send the room dimensions and door positions and we will place the four footprints against them and flag anything that will not open properly.
Have Your Room Sized Before You Order
Send the room dimensions and your chair count on WhatsApp and we will come back with a layout and the models that fit it.