Thermal Sealer
Seal Eco
The Seal Eco is a thermal sealer designed for small to mid-size clinics that need to wrap instruments in steri.
Seal Pro Thermal Sealer
The Seal Pro is a thermal sealer designed for dental clinics, hospitals, and medical practices that need to wrap instruments in sterilization pouches or reels with consistent, reliable seals.
Overview
What The Seal Pro Is For
The Seal Pro is a thermal sealer designed for dental clinics, hospitals, and medical practices that need to wrap instruments in sterilization pouches or reels with consistent, reliable seals. It handles a range of bag widths up to 300 mm and uses intelligent temperature and pressure control to maintain seal integrity during continuous use. The machine fits in small reprocessing areas and supports quick setup with automatic preheating and a hidden sliding blade for safety.
80+Countries with users
5+Patented technologies
1800Days of aging test
12Months warranty
Key Benefits
Why Clinics Choose The Seal Pro
12 mm-wide sealing seams remain intact after a 3-second pressure test, with no risk of burning or scorching
Intelligent sealing system automatically adjusts temperature and pressure for consistent performance under continuous operation
Rapid preheating in 2 to 3 minutes allows quick start-up between sessions
Hidden sliding blade protects the user from injury during operation
Supports three roll widths simultaneously, enabling high efficiency when switching between bag sizes
Front indicator and automatic beep signal the completion of a seal, reducing operator error
Application Scenarios
- Wrapping dental handpieces and hand instruments in sterilization pouches before loading into a Novo Pro sterilizer
- Sealing surgical kits and instrument sets in a clinic with limited reprocessing space
- Reprocessing reusable cannulas and small instruments in aesthetic or cosmetic clinics
- Creating sealed pouches for veterinary surgical packs that must remain sterile until use
- Maintaining consistent seal quality during high-volume instrument processing in a busy stomatology department
Who It Is For
- Dental clinics and stomatology departments that reprocess instruments on site
- Hospitals and outpatient practices without a central sterile services department
- Aesthetic and cosmetic clinics sterilizing reusable instruments and cannulas
- Veterinary practices sealing surgical packs in-house
- Dental equipment distributors and OEM/ODM partners requiring a reliable sealing solution
Problems It Solves
What Goes Wrong Without It
- Inconsistent seals from manual or low-end sealers can lead to contamination or failed sterilization
- Manual sealing requires constant attention and increases the risk of operator error
- Exposure to sharp edges during sealing increases the risk of injury in a busy reprocessing area
- Long preheat times delay the start of a new sealing cycle, slowing down instrument turnover
- Lack of automatic temperature and pressure control leads to weak or scorched seals under continuous use
- No visual or audible signal to confirm seal completion increases the chance of missed or incomplete seals
Technical
Technical Features And Specifications
- Intelligent sealing system with automatic temperature and pressure adjustment for consistent performance
- Rapid preheating in 2 to 3 minutes, ready for use after one preheat cycle
- Hidden sliding blade for user safety during operation
- Front indicator and automatic beep signal when sealing is complete
- Supports three roll widths simultaneously, with flexible adjustment to match bag width
- Maximum bearing width of 300 mm for large pouches and reels
- Overheat protection built into the system for safe operation
- Sealing seam width of 12 mm, tested to remain intact under 3 seconds of pressure
- Constant temperature heating maintains seal quality during continuous use
- Microcomputer control system with condensation optional function
| Voltage Frequency | 220V, 110V 150Hz, 60Hz |
|---|---|
| Consumption Power | 100 W |
| Preheating Time | 2-3 min |
| Packing Width | 12 mm |
| Overheat Protection | Yes |
| Gross Weight | 7.5 kg |
| Phase Number | Single phase |
| Waterproof Grade | I/IPXO |
| Fuse Specification | 2-5 x 20 T8A |
| Service Environment | Indoor use, altitude < 3000 m, ambient temperature 5 to 40 C, relative humidity 85% RH, max fluctuation ±10% |
| Conformity | Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility Directive 2014/30/EU, Machinery Safety Directive 2006/42/EC |
| Roll Holder Capacity | Three rolls at once |
| Maximum Bearing Width | 300 mm |
| Seal Quality Test | 12 mm seam intact after 3 seconds pressure test, no burning risk |
| Preheat Reuse | One preheat cycle can be used continuously |
| Sealing Speed | Quick sealing with automatic signal |
| Control System | Microcomputer |
| Optional Features | Condensing system, instrument tray |
Materials
- Stainless steel sealing bar for consistent heat transfer
- Plastic housing with minimalist, seamless design
- Hidden sliding blade made of durable, non-sharp material
- Roll holders made of metal with adjustable width guides
How It Is Used In The Workflow
- Prepare sterilization bags or reels with instruments already cleaned and dried
- Load the roll into the holder and adjust the width guide to match the bag size
- Turn on the machine and wait for the preheat indicator to confirm readiness (2-3 minutes)
- Place the bag or reel into the sealing channel and press the seal button
- The machine automatically applies heat and pressure, then signals completion with a beep
- Check the seal for integrity and ensure no scorching or rolling occurs
- Remove the sealed pouch and store it for sterilization in a Novo Pro or similar unit
Quality Control
- Each unit undergoes an 1800-day aging test before shipment, simulating long-term use
- Seal quality is verified under pressure test conditions to ensure 12 mm seams remain intact
- Automatic temperature and pressure control is tested for consistency across multiple cycles
- Overheat protection is verified to activate under simulated fault conditions
- The hidden blade mechanism is inspected for safety and durability in every unit
Certifications And Conformity
- EN 13060 small steam sterilizer
- IEC 61010-1
- IEC 61010-2-040
Options
Configuration And Customization
Optional condensing system for improved sealing in humid environments
Optional instrument tray for organizing small instruments before sealing
Multi-language interface available on request for international markets
OEM and ODM builds available for distributors, including custom branding and packaging
Comparison
How The Seal Pro Compares
| Compared With | What Changes |
|---|---|
| Manual sealing pliers | Manual pliers require constant pressure and skill, leading to inconsistent seals; the Seal Pro delivers uniform results with minimal operator input |
| Basic thermal sealer | Basic models lack automatic temperature control and overheat protection; the Seal Pro maintains performance under continuous use |
| Seal Pro with condensing system | The condensing system is optional and improves seal quality in high humidity; without it, the machine still performs reliably in standard conditions |
| Centralized sealing station | A centralized station requires more space and shared access; the Seal Pro fits in small rooms and allows individual use at the reprocessing bench |
Use Guide
Running The Seal Pro Day To Day
- Ensure the machine is placed on a stable, dry surface indoors with no direct water exposure
- Load the roll into the holder and adjust the width guide to match the bag width
- Turn on the machine and wait for the preheat indicator to turn green before sealing
- Place the bag or reel into the sealing channel and press the seal button; listen for the beep to confirm completion
- Check the seal for uniformity and absence of scorching or rolling
- Do not use the machine if the overheat protection has triggered; allow it to cool before restarting
- Clean the sealing bar periodically with a dry cloth to maintain performance
FAQ
Seal Pro Questions
What is the maximum bag width the Seal Pro can handle
The machine supports a maximum bearing width of 300 mm, suitable for large pouches and reels
How long does it take to preheat
Preheating takes 2 to 3 minutes, after which the machine is ready for use
Can the Seal Pro be used with different roll widths at once
Yes, it supports three rolls simultaneously, allowing flexible adjustment to different bag sizes
Is the blade safe to use
Yes, the sliding blade is hidden during operation and protected by a safety mechanism to prevent injury
What happens if the machine overheats
Overheat protection activates automatically to stop the machine and prevent damage
Can the Seal Pro be used in high humidity
Yes, but the optional condensing system improves performance in high humidity environments
Do you offer OEM or ODM versions
Yes, Joident provides OEM and ODM builds for distributors, including custom branding and interface settings
Related Reading
Industry
Dentistry
Handpieces, hand instruments, impression trays and surgical kits between patients.
See the applicationIndustryMedical
Reusable instrument sets in clinics without a central sterile services department.
See the applicationProcess GuidePouch Sealing And Cycle Traceability
The two things an inspector can check without opening anything - the seal on the packet and the record behind the cycle. How to make both automatic.
Read the guideProcess GuideThe Instrument Reprocessing Workflow Step By Step
Clean, supply water, wrap, sterilize, store. What each stage is responsible for and the failure that shows up when one of them is skipped.
Read the guideDownloadThermal Sealer Brochure
PDF brochure for this range
Go to downloadsAsk About The Seal Pro
Send the model name and your country and we will come back with a quote, lead time and the configuration options for the Seal Pro.