Water Distiller
Distilo II
The Distilo II is a water distiller designed for clinics and laboratories that need consistent, high-purity di.
Distilo Water Distiller
The Distilo water distiller produces low-conductivity water for sterilization and instrument reprocessing in small to mid-size clinics.
Overview
What The Distilo Is For
The Distilo water distiller produces low-conductivity water for sterilization and instrument reprocessing in small to mid-size clinics. A 4 L capacity chamber uses a single button start and intelligent control to distill tap water into laboratory grade I water with conductivity below 1.03 microsiemens per cm. The unit fits in tight spaces and runs on 220V or 110V, making it suitable for clinics with limited power or room. It is designed for continuous use in dental, medical, veterinary, and laboratory settings.
80+Countries with users
8+Patented technologies
700Days of aging test
12Months warranty
Key Benefits
Why Clinics Choose The Distilo
Produces distilled water with conductivity below 1.03 microsiemens per cm, meeting laboratory grade I standards
Single button start simplifies operation for rotating staff with minimal training
Intelligent control monitors distillation stages with a 3 colour indicator for real-time feedback
Energy efficient design with 750 W output power reduces running costs over time
Longer cooling coil improves condensation efficiency and reduces water loss
Medical grade 304 stainless steel inner chamber resists corrosion and maintains water purity
Application Scenarios
- Producing low-conductivity water for a Novo Pro steam sterilizer in a dental clinic with no central water system
- Supplying distilled water for ultrasonic cleaner Meto in a veterinary practice with limited space
- Providing pure water for instrument reprocessing in a tattoo studio where tap water is unsuitable
- Supporting a small laboratory’s daily need for distilled water without a dedicated distillation unit
- Filling a water distiller in a clinic with intermittent power, where low energy use is essential
Who It Is For
- Dental clinics and stomatology departments needing distilled water for sterilization
- Veterinary practices reprocessing instruments in-house with limited space
- Aesthetic and cosmetic clinics using reusable tools that require pure water
- Tattoo and piercing studios that must avoid mineral contamination in water
- Laboratories and medical practices requiring consistent water quality for instrument prep
Problems It Solves
What Goes Wrong Without It
- Tap water contains minerals that scale the boiler and reduce the life of sterilizers and distillers
- Manual water preparation leads to inconsistent purity and increases risk of contamination
- Lack of reliable water source in small clinics forces reliance on bottled water, increasing cost
- Poor water quality affects the performance of downstream equipment like sterilizers and ultrasonic cleaners
- Inconsistent distillation cycles due to lack of monitoring can lead to failed reprocessing
Technical
Technical Features And Specifications
- Single button start with intelligent control system for automated distillation
- 3 colour indicator shows each stage of the distillation process: heating, distillation, cooling
- Longer cooling coil improves condensation efficiency and reduces water loss
- Medical grade 304 stainless steel inner chamber resists corrosion and maintains purity
- Durable metal reset switch ensures long-term reliability under frequent use
- Patented filter and 4 L carafe design prevents contamination and supports clean output
- Water temperature of the output is below 40 degrees Celsius at 24 degrees ambient
- Fuses protected with F4AL250VAC for electrical safety
- Complies with Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility Directive 2014/30/EU, and Machinery Safety Directive 2006/42/EC
- SGS test reports confirm conductivity at 1.03 microsiemens per cm and TDS at 2.0 mg/L
| Carafe Capacity | 4 L |
|---|---|
| Chamber Capacity | 4 L |
| Output Power | 750 W |
| Input Power | 220V, 110V / 50Hz, 60Hz |
| Water Flow Rate | 1.5 L/H |
| Shell Material | Plastic + metal |
| Cavity Size | 180 x 175 mm |
| Overall Dimensions (L x W x H) | 315 x 230 x 365 mm |
| Net Weight | 7 kg |
| Gross Weight | 7.5 kg |
| Fuse | F4AL250VAC |
| Water Temperature (Output) | below 40 C (test environment 24 C) |
| Conformity | Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility Directive 2014/30/EU, Machinery Safety Directive 2006/42/EC |
| Conductivity (Tested) | 1.03 microsiemens per cm (SGS Test Report No.: NBF20-001823-02) |
| TDS (Tested) | 2.0 mg/L (SGS Test Report No.: NBF20-001823-06) |
| Power Supply | 220V or 110V, 50/60 Hz |
Materials
- Medical grade 304 stainless steel inner chamber
- Plastic and metal shell
- Durable metal reset switch
- Patented filter and 4 L carafe
How It Is Used In The Workflow
- Prepare the inner tank by unlocking and opening the top cover
- Pour 4 L of tap water into the inner chamber
- Close and lock the top cover, placing the water collection tank correctly
- Turn on the power switch and press the start button
- The unit begins distillation automatically, with the 3 colour indicator showing each stage
- Distilled water is collected in the carafe at a rate of 1.5 L per hour
- After completion, the output water is cooled to below 40 degrees Celsius
- Empty the carafe and clean the chamber regularly to maintain performance
Quality Control
- Each unit undergoes a 700-day aging test before shipment
- Conductivity and TDS are verified with SGS test reports before delivery
- The intelligent control system monitors each stage and stops if a fault occurs
- The 3 colour indicator provides real-time feedback on process status
- The patented filter and carafe are tested for integrity and contamination resistance
- All units are tested under real-world voltage and environmental conditions
Certifications And Conformity
- EN 13060 small steam sterilizer
- IEC 61010-1
- IEC 61010-2-040
Options
Configuration And Customization
Available in two colour options: GREY and BLUE
OEM and ODM builds available for distributors, including custom branding and packaging
Multi language operating system can be set for destination markets
Optional accessory pack included with each unit
Power supply can be adapted for 110V or 220V based on market need
Comparison
How The Distilo Compares
| Compared With | What Changes |
|---|---|
| Bottled distilled water | Bottled water is costly and generates plastic waste; the Distilo produces water on demand at lower long-term cost |
| Reverse osmosis systems | RO systems require maintenance and filters; the Distilo uses simple boiling and condensation with fewer moving parts |
| Distilo 2L model | The 4 L model supports longer continuous operation and is better suited for clinics with higher water demand |
| Tap water use in sterilizers | Tap water scales internal components and shortens equipment life; the Distilo provides pure water that extends sterilizer lifespan |
Use Guide
Running The Distilo Day To Day
- Unlock and open the top cover before adding 4 L of tap water to the inner chamber
- Close and lock the top cover securely, ensuring the water collection tank is correctly placed
- Turn on the power switch and press the single button start
- Monitor the 3 colour indicator to track the distillation stages: heating, distillation, cooling
- Wait for the cycle to complete; the output water will be below 40 degrees Celsius
- Remove the carafe and use the distilled water immediately or store it in a clean container
- Empty the waste water from the chamber after each cycle to prevent contamination
FAQ
Distilo Questions
What is the output water conductivity
The distilled water has a conductivity of 1.03 microsiemens per cm, meeting international laboratory grade I standards.
Can I use tap water in the Distilo
Yes, tap water is the input source. The unit distills it into low-conductivity water suitable for sterilization and lab use.
How much water does it produce per hour
The unit produces 1.5 litres of distilled water per hour under standard conditions.
What power supply does it need
It operates on 220V or 110V, 50/60 Hz, with a 750 W output. The fuse is F4AL250VAC.
How long is the warranty
The unit comes with a 12-month warranty on parts and labour, covering defects in materials and workmanship.
Is it safe to use in a dental clinic
Yes, it is designed for dental, medical, veterinary, and laboratory use, with materials and compliance suitable for clinical environments.
Can I get OEM or ODM versions
Yes, Joident offers OEM and ODM builds for distributors, including custom branding, packaging, and power supply options.
Related Products
Water Distiller
Distilo Eco
The Distilo Eco is a water distiller designed for clinics and laboratories that need consistent, low-conductiv.
Related Reading
Industry
Dentistry
Handpieces, hand instruments, impression trays and surgical kits between patients.
See the applicationIndustryMedical
Reusable instrument sets in clinics without a central sterile services department.
See the applicationProcess GuideFeed Water Is Why Sterilizers Fail Early
EN 13060 Annex C asks for conductivity below 5 microsiemens per centimetre. What happens when you ignore it, and how to produce that water on site.
Read the guideProcess GuideThe Instrument Reprocessing Workflow Step By Step
Clean, supply water, wrap, sterilize, store. What each stage is responsible for and the failure that shows up when one of them is skipped.
Read the guideDownloadWater Distiller Brochure
PDF brochure for this range
Go to downloadsAsk About The Distilo
Send the model name and your country and we will come back with a quote, lead time and the configuration options for the Distilo.