Steam Sterilizer
Novo Pro 23L LED
The Novo Pro 23L LED is a Class B steam sterilizer designed for small to mid-size dental clinics and medical p.
Novo Pro 23L Plus Steam Sterilizer
The Novo Pro 23L Plus is a Class B steam sterilizer for practices that need to turn instruments around quickly between patients.
Overview
What The Novo Pro 23L Plus Is For
The Novo Pro 23L Plus is a Class B steam sterilizer for practices that need to turn instruments around quickly between patients. A 23 L chamber accepts up to five trays, fractionated vacuum removes air from wrapped and hollow loads, and cycle data is stored on SD card or printed for compliance. It operates on 220-240 VAC, 50/60 Hz single phase and occupies 685 x 438 mm of bench space.
100+Countries with users
8Patented technologies
1800Days of aging test
24Months warranty
Key Benefits
Why Clinics Choose The Novo Pro 23L Plus
Class B fractionated vacuum sterilizes wrapped instruments and hollow handpieces, meeting EN 13060
Five trays per load reduce the number of cycles needed during a session
Cycle data is traceable on SD card or via an optional thermal printer, simplifying record keeping
Preheating with standby maintains chamber temperature, reducing cycle times
The intelligent diagnosis system identifies the failing section and displays the fault message
Double door locking prevents cycles from starting with an unlocked door or opening during pressure
Application Scenarios
- Turning around handpieces and instruments between patients in a dental practice
- Sterilizing wrapped surgical kits for use at the chairside
- Reprocessing hollow instruments to ensure steam reaches the lumen
- Running an end of day load of pouched instruments with extra drying
- Maintaining compliance with sterilization standards through documented cycle records
Who It Is For
- Dental clinics and stomatology departments needing on-site instrument reprocessing
- Small hospitals and outpatient practices without a central sterile services department
- Aesthetic and cosmetic clinics sterilizing reusable cannulas and instrument sets
- Veterinary practices sterilizing surgical packs in house
- Dental equipment distributors looking for a Class B sterilizer with documented conformity
Problems It Solves
What Goes Wrong Without It
- Unwrapped only sterilizers cannot process pouched or hollow loads, limiting treatment options
- Manual cycle logs are prone to errors and loss, creating a compliance risk
- Instruments exiting damp require reprocessing, wasting time and resources
- Cold starts increase cycle times, impacting workflow during busy periods
- Tap water scaling reduces chamber life and requires more frequent maintenance
Technical
Technical Features And Specifications
- Class B fractionated vacuum cycles conforming to EN 13060
- 11 pre-set programs and tests for various load types
- Preheating system with standby to maintain chamber temperature
- 260 x 142 mm cooling window with 73 aluminium radiating layers and 18 radiating pipes
- Manual water filling standard, automatic filling available as an option
- Intelligent monitoring and diagnosis system identifies fault sections
- Traceability to SD card or optional thermal printer
- Bacteriological filter retaining not less than 99.5 percent of particles above 0.3 micrometres
- Double safety door locking with mechanical, sensor and pressure locks
| Cycle Type | Class B, fractionated vacuum |
|---|---|
| Chamber Volume | 23 L |
| Electrical Supply | 220-240 VAC, 50/60Hz, single-phase |
| Max Working Pressure | 2.5 Bar(250 kPa) |
| Min Working Pressure | -0.9 Bar(-90 kpa) |
| Max Temperature | <145 C |
| Clean Water Tank | 3.5L |
| Sewage Tank | 1.7L |
| Bacteriological Filter | 99.5 percent for particles above 0.3 micrometres |
| Conformity | EN 13060, IEC 61010-1, IEC 61010-2-040, EN 61326 |
Materials
- Stainless steel sterilization chamber
- Steel wire tray carrier
- Aluminium instrument trays
How It Is Used In The Workflow
- Load preparation - instruments are cleaned and dried before wrapping
- Wrapping - pouches or reels are sealed with the cycle date visible
- Water supply - the tank is filled with EC conductivity <15uS/cm water
- Cycle selection - the operator selects one of the 11 pre-set programs
- Fractionated vacuum - repeated vacuum and steam pulses remove air
- Sterilization and drying - the cycle holds temperature, then dries
- Record - the cycle is written to SD card or printed
Quality Control
- Vacuum and pressure limits are monitored on every cycle with automatic abort
- Pre-set programs guarantee safe and effective sterilization
- The intelligent diagnosis system identifies the failing section
- Each unit undergoes an 1800 day aging test before shipment
- Cycle data is retained on removable media for traceability
Certifications And Conformity
- EN 13060 small steam sterilizer
- IEC 61010-1
- IEC 61010-2-040
Options
Configuration And Customization
Automatic water filling system
Built in thermal printer
Instruments management assistant trays
Multi language operating system
Comparison
How The Novo Pro 23L Plus Compares
| Compared With | What Changes |
|---|---|
| Class N sterilizer | The Novo Pro 23L Plus processes wrapped and hollow loads; a Class N unit handles unwrapped solids only |
| Smaller chamber sterilizers | The 23 L chamber suits a busier practice with higher throughput; smaller chambers reduce load capacity |
| Sterilizers without data logging | The Novo Pro 23L Plus logs cycles to SD card or printer, simplifying compliance; manual logging is prone to error |
| Central sterile services | On-site sterilization reduces turnaround time and eliminates transport costs, at the expense of capital equipment |
Use Guide
Running The Novo Pro 23L Plus Day To Day
- Fill the clean water tank with water meeting EC conductivity <15uS/cm
- Run the daily test programme before the first patient load
- Load trays so pouches lie flat and do not touch the chamber wall
- Select the program that matches the load type
- Use extra drying for dense instrument assemblies
- Empty the waste water tank when prompted
- Keep the SD card in place for cycle recording
FAQ
Novo Pro 23L Plus Questions
What type of water should I use
Use water with EC conductivity <15uS/cm. Distilled water is recommended.
How many cycles can I run per day
The sterilizer can run multiple cycles per day, depending on workload.
What is the sterilization time for a solid load
Sterilization time for a solid load is 10 minutes at 134 deg C.
What safety features does it have
It has double door locking, including mechanical, sensor and pressure locks.
What certifications does it have
It conforms to EN 13060, IEC 61010-1, IEC 61010-2-040 and EN 61326.
What is the warranty period
The warranty is 24 months or 2000 cycles, whichever comes first.
Can I get a printer with this sterilizer
A thermal printer is available as an option.
Related Products
Steam Sterilizer
Novo Pro 23L Max
The Novo Pro 23L Max is a Class B steam sterilizer for a practice that needs to turn around instruments quickl.
Steam Sterilizer
Novo Pro 23L
The Novo Pro 23L is a Class B steam sterilizer designed for small to mid-size reprocessing rooms where space i.
Steam Sterilizer
Novo Pro 18L
The Novo Pro 18L is a Class B steam sterilizer for clinics that need to reprocess instruments quickly between.
Related Reading
Industry
Dentistry
Handpieces, hand instruments, impression trays and surgical kits between patients.
See the applicationIndustryMedical
Reusable instrument sets in clinics without a central sterile services department.
See the applicationBuying GuideClass B Versus Class N Steam Sterilizers
What the cycle class actually changes, and why a practice that wraps instruments or reprocesses handpieces cannot use a Class N machine.
Read the guideBuying GuideChoosing The Right Autoclave Chamber Size
Chamber volume follows the busiest session rather than the number of chairs. How to work out which size in the 8 L to 45 L range fits your practice.
Read the guideDownloadNovo Pro Steam Sterilizer Brochure
PDF brochure for this range
Go to downloadsAsk About The Novo Pro 23L Plus
Send the model name and your country and we will come back with a quote, lead time and the configuration options for the Novo Pro 23L Plus.