Steam Sterilizer
Novo Pro 45L Plus
The Novo Pro 45L Plus is a Class B steam sterilizer built for high-volume reprocessing in clinics and surgical.
Sterilization For Tattoo And Piercing Studios
Joident's sterilization equipment supports tattoo and piercing studios in maintaining strict hygiene standards. The system covers the full reprocessing chain: cleaning, wrapping, water supply and sterilization. Each step is designed to prevent cross-infection and meet regulatory requirements for biological waste handling and reusable tool sterilization.
Pain Points
What Studios Get Inspected On
- Reusable tools like needles and templates must be sterilized after every client to prevent blood-borne disease transmission
- Lack of documented sterilization cycles makes compliance with health regulations difficult during inspections
- Tap water use damages internal components and reduces equipment lifespan due to scale buildup
- Inconsistent water quality leads to failed sterilization cycles and potential contamination
- Biological waste like used needles must be sterilized before disposal to meet environmental and safety standards
- Non-disposable tools require a reliable, repeatable process to ensure sterility between uses
What This Sector Needs
- A Class B steam sterilizer capable of processing wrapped and hollow instruments
- A water distiller to supply low-conductivity water for sterilizer operation
- A thermal sealer to wrap instruments with visible cycle dates
- An ultrasonic cleaner for pre-sterilization instrument cleaning
- A documented cycle record for compliance audits
- Equipment that fits in a small studio space and operates on standard single-phase power
Typical Scenarios
- Sterilizing reusable needles, syringes and templates between each client to prevent cross-contamination
- Processing biological waste such as used needles before disposal to meet local regulations
- Ensuring non-disposable tools like tattoo machines and grips are fully sterilized before reuse
- Maintaining compliance with health authority requirements in regions with strict hygiene laws
- Running a full reprocessing cycle in a studio with limited space and no central sterile services
- Creating a documented record of every sterilization cycle for audit or inspection purposes
Process
Reprocessing In A Studio
1
Clean instruments in an ultrasonic cleaner to remove ink and
Clean instruments in an ultrasonic cleaner to remove ink and tissue residue
2
Wrap instruments in sterilization pouches using a thermal se
Wrap instruments in sterilization pouches using a thermal sealer with the cycle date printed
3
Supply distilled water from a Distilo water distiller to the
Supply distilled water from a Distilo water distiller to the sterilizer feed tank
4
Load the sterilizer with wrapped instruments and select the
Load the sterilizer with wrapped instruments and select the appropriate Class B cycle
Delivery
What Joident Delivers To A Studio
Equipment delivered with full documentation for installation and operation
All units tested before shipment to ensure functional readiness
Support available via email or WhatsApp for setup and troubleshooting
Compliance with EN 13060, IEC 61010-1 and other relevant standards
Certified by TUV under ISO 13485:2016 and EU CE marked
Related Guides
Process Guide
The Instrument Reprocessing Workflow Step By Step
Clean, supply water, wrap, sterilize, store. What each stage is responsible for and the failure that shows up when one of them is skipped.
Read the guideBuying GuideClass B Versus Class N Steam Sterilizers
What the cycle class actually changes, and why a practice that wraps instruments or reprocesses handpieces cannot use a Class N machine.
Read the guideFAQ
Tattoo And Piercing Sterilization Questions
What type of sterilizer is needed for tattoo tools
A Class B steam sterilizer with fractionated vacuum is required to sterilize wrapped instruments and hollow tools like needles and syringes. The Novo Pro series meets EN 13060 standards.
Can tap water be used in the sterilizer
No. Tap water has high conductivity and causes scale buildup. Feed water must be below 5 microsiemens per cm, which is achieved using a Distilo water distiller.
How are cycle records kept for compliance
Every cycle is recorded on SD card or USB. A built-in or external printer can produce a paper record for audit files.
What tools need sterilization in a tattoo studio
Reusable tools including needles, syringes, templates, tweezers, grips and machine parts must be sterilized after each use. Disposable items do not require sterilization.
Can biological waste be sterilized before disposal
Yes. Used needles and other biological waste can be sterilized in the autoclave before safe disposal, reducing environmental and health risks.
What power supply does the sterilizer need
Single-phase 200-240 Vac, 50/60 Hz, nominally 230 Vac at 50 Hz. A dedicated circuit is recommended.
Do you supply equipment for tattoo studios as OEM or ODM
Yes. Joident provides OEM and ODM solutions for distributors and partners. Contact via WhatsApp or email to discuss custom configurations.
Specify A Studio Sterilization Setup
Send what you reprocess and how often, and we will propose the smallest setup that still meets the standard.