LTL812
- Steer Axle
- Trailer Axle
- 23 sizes
- Regional
LTL812 is a radial truck tyre designed for steer and trailer axles in regional service applications. It is built for long life and retreadability, with a tread pattern that minimises eccentric wear during extended use. 5, with ply ratings from 14 to 22 and load indices up to 158/150. 0 mm.
What LTL812 Is Built For
LTL812 is a radial truck tyre designed for steer and trailer axles in regional service applications. It is built for long life and retreadability, with a tread pattern that minimises eccentric wear during extended use. The tyre is available in 23 sizes across 11.00R20, 9R22.5 to 315/80R22.5, with ply ratings from 14 to 22 and load indices up to 158/150. It supports dual and single fitments across a range of standard rims, with tread depths between 15.0 mm and 17.0 mm. The pattern is suited for mixed-duty regional hauls, including urban delivery, intercity routes and feeder roads, where consistent casing life and low wear variation are required.
Manufacturer Feature Claims
- Long life
- Retreadability
- Low eccentric wear
Key Benefits
- Long life and retreadability reduce total cost of ownership over multiple service cycles
- Low eccentric wear minimises uneven tread wear and extends casing life
- Multiple ply ratings and load indices allow matching to axle load and rim width
- Tread depth of 15.0 to 17.0 mm supports extended service life before retreading
- Available in 23 sizes from 11.00R20 to 315/80R22.5 for regional fleet fitment
Problems It Solves
- Short casing life due to uneven wear patterns on steer and trailer axles in regional service
- High replacement cost from tyres that cannot be retreaded due to poor tread uniformity
- Mismatch between tyre load capacity and actual axle load when using overspecified or underspecified ply ratings
- Inconsistent fitment across sizes when sourcing from multiple factories with different rim and pressure standards
- Need for multiple tyre patterns for steer and trailer axles when a single pattern with low eccentric wear is available
Who It Is For
- Regional fleet operators needing steer and trailer axle tyres with long casing life
- Tyre distributors supplying regional truck and bus fleets in Asia, Africa, South America and Europe
- Fleet managers replacing tyres that show early eccentric wear or fail before retreadable tread depth
- Importers sourcing mixed container loads of regional tyres across multiple sizes and brands
- Contractors running regional service vehicles with high axle loads and frequent stops
Application Scenarios
- Regional delivery fleets operating on mixed urban and rural routes with frequent stops and starts
- Truck and bus operators running regional services with high axle loads and extended tyre life targets
- Fleets that require consistent casing life across steer and trailer axles to reduce replacement frequency
- Operators using retreaded tyres and needing a pattern with low eccentric wear for predictable casing performance
- Importers sourcing tyres for mixed container loads across multiple regional sizes and patterns
Technical Features
- Radial casing construction with reinforced belt package for long life and retreadability
- Tread block design minimises eccentric wear during extended regional service
- Tread depth of 15.0 to 17.0 mm across all listed sizes supports multiple retread cycles
- Multiple standard rim sizes from 6.75 to 9.75 ensure compatibility with common truck and bus wheel configurations
- Load index and pressure data provided for both dual and single fitments to match axle load and rim width
Size Table and Specification
Manufacturer data for every size in this pattern. Check the standard rim against your wheel and the load against your axle plate before ordering.
- Tyre Type
- Radial truck tyre
- Axle Position
- Steer axle, Trailer axle
- Category
- Regional
- Family
- Truck and bus radial
- Sizes Available
- 11.00R20, 9R22.5, 10R22.5, 11R22.5, 12R22.5, 295/80R22.5, 315/80R22.5, 285/70R19.5
- Ply Ratings
- 14, 16, 18, 20, 22
- Load Index Range
- 136/134 to 158/150
- Speed Symbols
- K, M, L, L(M), J
- Tread Depth Range
- 15.0 mm to 17.0 mm
- Section Width Range
- 229 mm to 312 mm
- Overall Diameter Range
- 895 mm to 1085 mm
- Standard Rims
- 6.75, 7.50, 8.0, 8.25, 9.00, 9.75
- Max Load Dual Range
- 2120 kg to 3350 kg
- Max Load Single Range
- 2240 kg to 4250 kg
- Pressure Dual Range
- 720 kPa to 930 kPa
- Pressure Single Range
- 720 kPa to 900 kPa
- Operation Norm
- GB, TRA, ETRTO
All 23 Listed Sizes
| Size | Ply Rating | Load Index | Speed Symbols | Standard Rim | Max Load Dual (kg) | Pressure Dual (kPa) | Max Load Single (kg) | Pressure Single (kPa) | Overall Diameter(mm) | Section Width (mm) | Tread Depth (mm) | Operation Norm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 11.00R20 | 16 | 150/147 | K | 8.0 | 3075 | 830 | 3350 | 830 | 1085 | 293 | 16.0 | GB |
| 11.00R20 | 18 | 152/149 | K | 8.0 | 3250 | 930 | 3550 | 930 | 1085 | 293 | 16.0 | GB |
| 9R22.5 | 14 | 136/134 | M | 6.75 | 2120 | 830 | 2240 | 830 | 974 | 229 | 15.0 | TRA |
| 10R22.5 | 14 | 141/139 | L | 7.50 | 2430 | 790 | 2575 | 790 | 1019 | 254 | 17.0 | TRA |
| 11R22.5 | 14 | 144/142 | M | 8.25 | 2650 | 720 | 2800 | 720 | 1054 | 279 | 16.0 | TRA |
| 11R22.5 | 16 | 146/143 | M | 8.25 | 2725 | 830 | 3000 | 830 | 1054 | 279 | 16.0 | TRA |
| 11R22.5 | 16 | 148/145 | M | 8.25 | 2900 | 850 | 3150 | 850 | 1050 | 279 | 16.0 | ETRTO |
| 12R22.5 | 16 | 152/148 | L | 9.00 | 3150 | 850 | 3550 | 850 | 1084 | 300 | 17.0 | ETRTO |
| 12R22.5 | 18 | 152/149 | L | 9.00 | 3250 | 930 | 3550 | 930 | 1085 | 300 | 17.0 | GB |
| 295/80R22.5 | 16 | 152/148 | M | 9.00 | 3150 | 850 | 3550 | 850 | 1044 | 298 | 17.0 | ETRTO |
| 295/80R22.5 | 18 | 152/149 | M | 9.00 | 3250 | 900 | 3550 | 900 | 1044 | 298 | 17.0 | GB |
| 295/80R22.5 | 18 | 154/149 | M | 9.00 | 3250 | 850 | 3750 | 850 | 1044 | 298 | 17.0 | ETRTO |
| 315/80R22.5 | 18 | 154/150 | M | 9.00 | 3350 | 825 | 3750 | 825 | 1076 | 312 | 17.0 | ETRTO |
| 315/80R22.5 | 20 | 156/150 | M | 9.00 | 3350 | 850 | 4000 | 850 | 1076 | 312 | 17.0 | ETRTO |
| 315/80R22.5 | 22 | 158/150 (154/150) | L(M) | 9.00 | 3350 | 900 | 4250 | 900 | 1076 | 312 | 17.0 | ETRTO |
| 285/70R19.5 | 16 | 140/137 | M | 8.25 | 2300 | 725 | 2500 | 725 | 895 | 283 | 16.0 | ETRTO |
| 285/70R19.5 | 18 | 146/144 | M | 8.25 | 2800 | 900 | 3000 | 900 | 895 | 283 | 16.0 | ETRTO |
| 285/70R19.5 | 18 | 150/148 | J | 8.25 | 3150 | 900 | 3350 | 900 | 895 | 283 | 16.0 | ETRTO |
| 275/70R22.5 | 16 | 148/145 | M | 8.25 | 2900 | 900 | 3150 | 900 | 958 | 276 | 16.0 | ETRTO |
| 315/70R22.5 | 16 | 154/150 (152/148) | L(M) | 9.00 | 3350 | 900 | 3750 | 900 | 1014 | 312 | 17.0 | ETRTO |
| 315/70R22.5 | 18 | 156/150 (154/150) | L(M) | 9.00 | 3350 | 900 | 4000 | 900 | 1014 | 312 | 17.0 | ETRTO |
| 315/60R22.5 | 16 | 152/148 | L | 9.75 | 3150 | 900 | 3550 | 900 | 950 | 313 | 17.0 | ETRTO |
| 315/60R22.5 | 18 | 154/150 (152/148) | L(M) | 9.75 | 3350 | 900 | 3750 | 900 | 950 | 313 | 17.0 | ETRTO |
Materials and Construction
- Radial steel casing construction as supplied by the manufacturing plant
- Tread compound formulated for low eccentric wear and extended casing life
- Sidewall compound designed to resist cracking and fatigue under regional service conditions
From Size List to Loaded Container
Confirm size, ply rating, load index and rim width against your vehicle's axle and wheel specifications
We quote FOB or CIF based on your load port and confirm current plant availability
Production or stock allocation is confirmed with the plant before deposit is required
Container is loaded, insured and shipped with full export documentation and certificate of origin
Quality and After Sales
- Every tyre supplied carries a one year warranty against manufacturing defect
- Warranty claims are handled directly by us, not passed back to the plant
- Cargo transportation insurance is arranged on every shipment
- DOT, ECE and other markings are confirmed against your market requirement before loading
Customisation Options
- Mixed container loading across sizes, patterns and brands to match your order book
- Certificate of origin issued to suit your import duty position
- Sidewall branding and private label subject to plant minimum order quantity
- Label, marking and packaging adjusted to the destination market requirement
Where This Pattern Wins and Where It Does Not
Compared With General-purpose steer tyres with no focus on eccentric wear
LTL812 reduces uneven wear over time, extending casing life and reducing replacement frequency
Compared With Tyres designed for long-haul highway use
LTL812 prioritises retreadability and low eccentric wear over rolling resistance and highway mileage
Compared With Tyres with no retreadability claim
LTL812 is built for multiple retread cycles, reducing long-term tyre cost
Use Guide
- Match ply rating to actual axle load, not to the highest available rating to avoid overspecification
- Check the standard rim listed against your wheel: 6.75 for 9R22.5, 7.50 for 10R22.5, 8.25 for 11R22.5 and 285/70R19.5, 9.00 for 12R22.5 and above
- Inflate to the pressure shown for your load in the size table; dual and single fitment pressures differ
- Monitor tread wear regularly to ensure even wear across the tread face and avoid early casing failure
- Inspect for signs of uneven wear or belt exposure before retreading to ensure casing integrity
LTL812 Buying Questions
What is the minimum order quantity?
We load by full container. A 40HQ of 11.00R20 or 315/80R22.5 typically fills at container weight rather than volume, so the practical minimum is one container. Mixed loads across sizes and patterns are accepted.
What is the lead time?
It depends on whether the size is in stock at the plant or has to be produced. We confirm current availability with the plant at the time of quotation rather than quoting a standard figure.
Which sizes are available?
11.00R20, 9R22.5, 10R22.5, 11R22.5, 12R22.5, 295/80R22.5, 315/80R22.5, 285/70R19.5. Full load index, rim and pressure data for each is in the size table on this page.
Is this tyre retreadable?
Yes. LTL812 is designed for long life and retreadability, with a tread pattern and compound that support multiple retread cycles.
Can you supply DOT or ECE marked tyres?
Marking requirements vary by destination. Tell us the import market and we confirm what marking the plant can supply on that size before you place the order.
What warranty do you give?
One year against manufacturing defect on all tyres we supply, with claims handled by us directly. Cargo transportation insurance is provided on the shipment itself.
Can you ship a mixed container with other patterns?
Yes. Most of our customers load one container across several patterns and sizes, which is the main reason to buy through us rather than from a single plant.
Other Patterns in the Same Category
Where This Tyre Fits and How to Specify It
Long Distance Freight
Trunk road and motorway haulage lives or dies on cost per kilometre. We supply the steer, drive and trailer patterns that hold an even wear pattern over…
Read the industry guideUrban Logistics
Last mile work is the hardest duty cycle a tyre sees per kilometre: constant stop start, kerb strikes at every drop, full load out and empty back. Light…
Read the industry guideBus and Coach
Buses punish tyres in a way freight does not: constant kerb contact at stops, tight full-lock turns in depots, and a duty cycle where passenger comfort…
Read the industry guideSteer Drive and Trailer Choosing by Axle Position
Why steer drive and trailer tyres are different, and what breaks when the wrong one is fitted
Read the guideInflation Pressure and Casing Life
Pressure carries the load, not the tyre, and what under and over inflation each cost you
Read the guideHow to Read a Tyre Sidewall Marking
What 315/80R22.5 156/150K actually means, and the three checks to make on a size table before you order
Read the guideGet a Price on LTL812
Send the sizes and quantities you need. We confirm plant availability and quote FOB or CIF against your load port, and it can share a container with any other pattern.