Product Family
Metallized Ceramic Parts
Mo Mn metallized and plated ceramics ready to braze
The 1 Product in This Family
A ceramic to metal joint has to be engineered into the ceramic before anyone reaches for braze alloy. Metallized parts carry a molybdenum manganese layer at 25 plus or minus 10 microns with nickel plating at 2 to 10 microns, giving an average pin pull strength of 4200 kgf/cm2 on a 3.0 mm pin. Ni, Cu, Au and Ag plating are available, on 95% or 96% alumina, AlN or BeO.
Problems This Family Solves
- Hermetic joints leaking because metallization thickness varies between lots
- Assemblies that cannot be sealed because the ceramic will not wet with braze alloy
- Responsibility split between a ceramic supplier and a separate brazing house
Core Advantages
- Controlled Mo Mn metallization at 25 plus or minus 10 microns
- Nickel plate of 2 to 10 microns protecting the layer before brazing
- 4200 kgf/cm2 average pin pull strength on a 3.0 mm pin
- Metallizing and brazing both available in house on one drawing
Who Buys This Family
Hermetic feedthrough designers
Power transmission and distribution equipment makers
Solid oxide fuel cell developers
Automotive and textile machinery OEMs
Industries That Use These Parts
Related Application Notes
Guides That Cover This Material
Metallized Ceramic Parts FAQ
How thick is the metallization layer?
Mo Mn metallization is 25 plus or minus 10 microns, with 2 to 10 microns of nickel over it.
Which platings can you apply?
Nickel, copper, gold and silver.
Can you braze the assembly for us?
Yes. Metallization and brazing are both possible, across a wide range of sizes and shapes.
Which ceramic bodies can be metallized?
95% and 96% alumina, AlN ceramic substrate and BeO ceramic substrate.
Other Product Families
Al2O3 Alumina Ceramic PartsThe general purpose technical ceramic for wear heat and insulation5 products
Zirconia Ceramic PartsThe tough ceramic for slender loaded and impacted components3 products
Steatite Ceramic PartsTalc based insulators for heating elements sockets and transformers3 products
Ceramic BladesZirconia and silicon nitride edges for abrasive hot and hygienic cutting3 productsGet a Quote on Metallized Ceramic Parts
Send your drawing with the working temperature and the medium. Samples ship in 4 to 7 working days.
Send a 2D or 3D drawing by WhatsApp or email. Samples in 4 to 7 working days.